From: Luwei Kang <luwei.kang@intel.com>
To: kvm@vger.kernel.org
Cc: tglx@linutronix.de, mingo@redhat.com, hpa@zytor.com,
x86@kernel.org, pbonzini@redhat.com, rkrcmar@redhat.com,
linux-kernel@vger.kernel.org, joro@8bytes.org,
Chao Peng <chao.p.peng@linux.intel.com>,
Luwei Kang <luwei.kang@intel.com>
Subject: [PATCH v3 9/9] KVM: x86: Implement Intel Processor Trace context switch
Date: Tue, 28 Nov 2017 04:24:02 +0800 [thread overview]
Message-ID: <1511814242-12949-10-git-send-email-luwei.kang@intel.com> (raw)
In-Reply-To: <1511814242-12949-1-git-send-email-luwei.kang@intel.com>
From: Chao Peng <chao.p.peng@linux.intel.com>
Load/Store Intel processor trace register in context switch.
MSR IA32_RTIT_CTL is loaded/stored automatically from VMCS.
In HOST mode, we just need to restore the status of IA32_RTIT_CTL.
In HOST_GUEST mode, we need load/resore PT MSRs only when PT is
enabled in guest.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
---
arch/x86/kvm/vmx.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index b4ad8fc..fb0e54a 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2142,6 +2142,55 @@ static unsigned long segment_base(u16 selector)
}
#endif
+static inline void pt_load_msr(struct pt_ctx *ctx, unsigned int addr_num)
+{
+ u32 i;
+
+ wrmsrl(MSR_IA32_RTIT_STATUS, ctx->status);
+ wrmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base);
+ wrmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask);
+ wrmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match);
+ for (i = 0; i < addr_num; i++)
+ wrmsrl(MSR_IA32_RTIT_ADDR0_A + i, ctx->addrs[i]);
+}
+
+static inline void pt_save_msr(struct pt_ctx *ctx, unsigned int addr_num)
+{
+ u32 i;
+
+ rdmsrl(MSR_IA32_RTIT_STATUS, ctx->status);
+ rdmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base);
+ rdmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask);
+ rdmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match);
+ for (i = 0; i < addr_num; i++)
+ rdmsrl(MSR_IA32_RTIT_ADDR0_A + i, ctx->addrs[i]);
+}
+
+static void pt_guest_enter(struct vcpu_vmx *vmx)
+{
+ if (pt_mode == PT_MODE_HOST || PT_MODE_HOST_GUEST)
+ rdmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
+
+ if (pt_mode == PT_MODE_HOST_GUEST &&
+ vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) {
+ wrmsrl(MSR_IA32_RTIT_CTL, 0);
+ pt_save_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_num);
+ pt_load_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_num);
+ }
+}
+
+static void pt_guest_exit(struct vcpu_vmx *vmx)
+{
+ if (pt_mode == PT_MODE_HOST_GUEST &&
+ vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) {
+ pt_save_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_num);
+ pt_load_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_num);
+ }
+
+ if (pt_mode == PT_MODE_HOST || pt_mode == PT_MODE_HOST_GUEST)
+ wrmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
+}
+
static void vmx_save_host_state(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -5758,6 +5807,17 @@ static void vmx_vcpu_setup(struct vcpu_vmx *vmx)
vmcs_write64(PML_ADDRESS, page_to_phys(vmx->pml_pg));
vmcs_write16(GUEST_PML_INDEX, PML_ENTITY_NUM - 1);
}
+
+ if (pt_mode == PT_MODE_HOST_GUEST) {
+ u32 eax, ebx, ecx, edx;
+
+ cpuid_count(0x14, 1, &eax, &ebx, &ecx, &edx);
+ memset(&vmx->pt_desc, 0, sizeof(vmx->pt_desc));
+ vmx->pt_desc.addr_num = eax & 0x7;
+ /* Bit[6~0] are forced to 1, writes are ignored. */
+ vmx->pt_desc.guest.output_mask = 0x7F;
+ vmcs_write64(GUEST_IA32_RTIT_CTL, 0);
+ }
}
static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
@@ -9590,6 +9650,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
vcpu->arch.pkru != vmx->host_pkru)
__write_pkru(vcpu->arch.pkru);
+ pt_guest_enter(vmx);
+
atomic_switch_perf_msrs(vmx);
debugctlmsr = get_debugctlmsr();
@@ -9725,6 +9787,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
| (1 << VCPU_EXREG_CR3));
vcpu->arch.regs_dirty = 0;
+ pt_guest_exit(vmx);
+
/*
* eager fpu is enabled if PKEY is supported and CR4 is switched
* back on host, so it is safe to read guest PKRU from current
--
1.8.3.1
next prev parent reply other threads:[~2017-11-28 10:09 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-27 20:23 [PATCH v3 0/9] Intel Processor Trace virtulization enabling Luwei Kang
2017-11-27 20:23 ` [PATCH v3 1/9] perf/x86/intel/pt: Move Intel-PT MSR bit definitions to a public header Luwei Kang
2017-11-27 20:23 ` [PATCH v3 2/9] perf/x86/intel/pt: Change pt_cap_get() to a public function Luwei Kang
2017-11-27 20:23 ` [PATCH v3 3/9] KVM: x86: Add Intel Processor Trace virtualization mode Luwei Kang
2017-11-30 12:25 ` Paolo Bonzini
2017-11-27 20:23 ` [PATCH v3 4/9] KVM: x86: Add Intel Processor Trace cpuid emulation Luwei Kang
2017-11-30 12:14 ` Paolo Bonzini
2017-11-30 12:17 ` Paolo Bonzini
2017-11-27 20:23 ` [PATCH v3 5/9] KVM: x86: Add a function to disable/enable Intel PT MSRs intercept Luwei Kang
2017-11-27 20:23 ` [PATCH v3 6/9] KVM: x86: Add Intel processor trace context for each vcpu Luwei Kang
2017-11-27 20:24 ` [PATCH v3 7/9] KVM: x86: Implement Intel Processor Trace MSRs read/write Luwei Kang
2017-11-30 12:20 ` Paolo Bonzini
2017-12-01 6:40 ` Kang, Luwei
2017-12-01 8:33 ` Paolo Bonzini
2017-12-04 1:21 ` Kang, Luwei
2017-11-27 20:24 ` [PATCH v3 8/9] KVM: x86: Disable Intel Processor Trace when VMXON in L1 guest Luwei Kang
2017-11-30 12:22 ` Paolo Bonzini
2017-11-27 20:24 ` Luwei Kang [this message]
2017-11-30 12:27 ` [PATCH v3 9/9] KVM: x86: Implement Intel Processor Trace context switch Paolo Bonzini
2017-11-30 12:27 ` [PATCH v3 0/9] Intel Processor Trace virtulization enabling Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511814242-12949-10-git-send-email-luwei.kang@intel.com \
--to=luwei.kang@intel.com \
--cc=chao.p.peng@linux.intel.com \
--cc=hpa@zytor.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®