From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753761AbdK3QrS (ORCPT ); Thu, 30 Nov 2017 11:47:18 -0500 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:50230 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753489AbdK3QrM (ORCPT ); Thu, 30 Nov 2017 11:47:12 -0500 From: Loic Pallardy To: , CC: , , , , Loic Pallardy Subject: [PATCH v2 00/16] remoteproc: add fixed memory region support Date: Thu, 30 Nov 2017 17:46:35 +0100 Message-ID: <1512060411-729-1-git-send-email-loic.pallardy@st.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.75.127.50] X-ClientProxiedBy: SFHDAG3NODE2.st.com (10.75.127.8) To SFHDAG7NODE2.st.com (10.75.127.20) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-11-30_05:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The aim of the series is to implement carveout memory management as discussed during OpenAMP weekly call and defined in proposed document [1] This first series focus only on adding support of the different types of carveout memories (dynamic, fixed, platform driver depend...). 64bit resource table will be addressed in a next series. [1]: http://openamp.github.io/docs/mca/coprocessor-memory-definition-v6.pdf --- Changes since V1: - Minor corrections on first 7 patches (error management) - Add "memory device" support on the top of first 7 patches. Goal is to answer use case reported during OpenAMP weekly discussion: - "Be able to specify memory region for vring and buffer allocation, even if no specific request defined in firmware resource table." Patches offer the capability to create a "memory device" associated to a carveout with a dedicated DMA memory pool. Different resource handlers are modified to look-up for specific carveout by name. If match found and associated "memory device" present, device is used instead of rproc platform device for allocation. Loic Pallardy (16): remoteproc: add rproc_va_to_pa function remoteproc: add release ops in rproc_mem_entry struct remoteproc: introduce rproc_add_carveout function remoteproc: introduce rproc_find_carveout_by_da remoteproc: modify rproc_handle_carveout to support preallocated region remoteproc: modify vring allocation to support preallocated region remoteproc: st: add reserved memory support remoteproc: add name in rproc_mem_entry struct remoteproc: add memory device management support remoteproc: add memory device registering in rproc_add_carveout remoteproc: introduce rproc_find_carveout_by_name function remoteproc: look-up memory-device for vring allocation remoteproc: look-up memory-device for virtio device allocation remoteproc: look-up pre-registered carveout by name for carveout allocation remoteproc: st: associate memory device to memory regions rpmsg: virtio: allocate buffer from parent drivers/remoteproc/remoteproc_core.c | 408 +++++++++++++++++++++++++++++-- drivers/remoteproc/remoteproc_debugfs.c | 1 + drivers/remoteproc/remoteproc_internal.h | 7 + drivers/remoteproc/remoteproc_virtio.c | 2 +- drivers/remoteproc/st_remoteproc.c | 44 +++- drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- include/linux/remoteproc.h | 14 +- 7 files changed, 441 insertions(+), 37 deletions(-) -- 1.9.1