mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Loic Pallardy <loic.pallardy@st.com>
To: <bjorn.andersson@linaro.org>, <ohad@wizery.com>
Cc: <linux-remoteproc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <arnaud.pouliquen@st.com>,
	<benjamin.gaignard@linaro.org>,
	Loic Pallardy <loic.pallardy@st.com>
Subject: [PATCH v2 06/16] remoteproc: modify vring allocation to support preallocated region
Date: Thu, 30 Nov 2017 17:46:41 +0100	[thread overview]
Message-ID: <1512060411-729-7-git-send-email-loic.pallardy@st.com> (raw)
In-Reply-To: <1512060411-729-1-git-send-email-loic.pallardy@st.com>

Current version of rproc_alloc_vring function supports only dynamic vring
allocation.
This patch extends rproc_alloc_vring to verify if requested vring DA is
already part or not of a registered carveout. If true, nothing to do, else
just allocate vring as before.

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
---
 drivers/remoteproc/remoteproc_core.c | 53 +++++++++++++++++++++++-------------
 1 file changed, 34 insertions(+), 19 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 515a17a..bdc99cd 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -263,21 +263,41 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	struct device *dev = &rproc->dev;
 	struct rproc_vring *rvring = &rvdev->vring[i];
 	struct fw_rsc_vdev *rsc;
-	dma_addr_t dma;
+	dma_addr_t dma = -1;
 	void *va;
 	int ret, size, notifyid;
 
 	/* actual size of vring (in bytes) */
 	size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
 
-	/*
-	 * Allocate non-cacheable memory for the vring. In the future
-	 * this call will also configure the IOMMU for us
-	 */
-	va = dma_alloc_coherent(dev->parent, size, &dma, GFP_KERNEL);
-	if (!va) {
-		dev_err(dev->parent, "dma_alloc_coherent failed\n");
-		return -EINVAL;
+	/* get vring resource table pointer */
+	rsc = (void *)rproc->table_ptr + rvdev->rsc_offset;
+
+	if (rsc->vring[i].da != FW_RSC_ADDR_ANY) {
+		va = rproc_find_carveout_by_da(rproc, rsc->vring[i].da, size);
+
+		if (!va) {
+			/* No region not found */
+			dev_err(dev->parent, "Pre-allocated vring not found\n");
+			return -ENOMEM;
+		}
+	} else {
+		/*
+		 * Allocate non-cacheable memory for the vring. In the future
+		 * this call will also configure the IOMMU for us
+		 */
+		va = dma_alloc_coherent(dev->parent, size, &dma, GFP_KERNEL);
+		if (!va) {
+			dev_err(dev->parent, "dma_alloc_coherent failed\n");
+			return -EINVAL;
+		}
+		/*
+		 * Let the rproc know the da of this vring.
+		 * Not all platforms use dma_alloc_coherent to automatically
+		 * set up the iommu. In this case the device address (da) will
+		 * hold the physical address and not the device address.
+		 */
+		rsc->vring[i].da = dma;
 	}
 
 	/*
@@ -288,7 +308,8 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	ret = idr_alloc(&rproc->notifyids, rvring, 0, 0, GFP_KERNEL);
 	if (ret < 0) {
 		dev_err(dev, "idr_alloc failed: %d\n", ret);
-		dma_free_coherent(dev->parent, size, va, dma);
+		if (dma != -1)
+			dma_free_coherent(dev->parent, size, va, dma);
 		return ret;
 	}
 	notifyid = ret;
@@ -304,14 +325,7 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	rvring->dma = dma;
 	rvring->notifyid = notifyid;
 
-	/*
-	 * Let the rproc know the notifyid and da of this vring.
-	 * Not all platforms use dma_alloc_coherent to automatically
-	 * set up the iommu. In this case the device address (da) will
-	 * hold the physical address and not the device address.
-	 */
-	rsc = (void *)rproc->table_ptr + rvdev->rsc_offset;
-	rsc->vring[i].da = dma;
+	/* Let the rproc know the notifyid of this vring. */
 	rsc->vring[i].notifyid = notifyid;
 	return 0;
 }
@@ -348,7 +362,8 @@ void rproc_free_vring(struct rproc_vring *rvring)
 	int idx = rvring->rvdev->vring - rvring;
 	struct fw_rsc_vdev *rsc;
 
-	dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring->dma);
+	if (rvring->dma != -1)
+		dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring->dma);
 	idr_remove(&rproc->notifyids, rvring->notifyid);
 
 	/* reset resource entry info */
-- 
1.9.1

  parent reply	other threads:[~2017-11-30 16:50 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-30 16:46 [PATCH v2 00/16] remoteproc: add fixed memory region support Loic Pallardy
2017-11-30 16:46 ` [PATCH v2 01/16] remoteproc: add rproc_va_to_pa function Loic Pallardy
2017-12-14  0:30   ` Bjorn Andersson
2018-01-12  7:43     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 02/16] remoteproc: add release ops in rproc_mem_entry struct Loic Pallardy
2017-12-14  0:34   ` Bjorn Andersson
2018-01-12  7:43     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 03/16] remoteproc: introduce rproc_add_carveout function Loic Pallardy
2017-12-14  0:36   ` Bjorn Andersson
2018-01-12  7:45     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 04/16] remoteproc: introduce rproc_find_carveout_by_da Loic Pallardy
2017-12-14  0:45   ` Bjorn Andersson
2018-01-12  7:48     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 05/16] remoteproc: modify rproc_handle_carveout to support preallocated region Loic Pallardy
2017-12-14  0:59   ` Bjorn Andersson
2018-01-12  7:56     ` Loic PALLARDY
2018-10-23 17:40       ` Suman Anna
2018-10-23 19:09         ` Loic PALLARDY
2018-10-23 19:12           ` Suman Anna
2017-11-30 16:46 ` Loic Pallardy [this message]
2017-12-14  1:09   ` [PATCH v2 06/16] remoteproc: modify vring allocation " Bjorn Andersson
2018-01-12  8:13     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 07/16] remoteproc: st: add reserved memory support Loic Pallardy
2017-12-14  1:15   ` Bjorn Andersson
2018-01-12  8:19     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 08/16] remoteproc: add name in rproc_mem_entry struct Loic Pallardy
2017-12-14  1:21   ` Bjorn Andersson
2018-01-12  8:19     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 09/16] remoteproc: add memory device management support Loic Pallardy
2017-11-30 16:46 ` [PATCH v2 10/16] remoteproc: add memory device registering in rproc_add_carveout Loic Pallardy
2017-12-14  1:29   ` Bjorn Andersson
2018-01-15  9:09     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 11/16] remoteproc: introduce rproc_find_carveout_by_name function Loic Pallardy
2017-12-14  1:32   ` Bjorn Andersson
2018-01-15  9:10     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 12/16] remoteproc: look-up memory-device for vring allocation Loic Pallardy
2017-12-14  1:44   ` Bjorn Andersson
2018-01-15 20:44     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 13/16] remoteproc: look-up memory-device for virtio device allocation Loic Pallardy
2017-12-14  5:32   ` Bjorn Andersson
2018-01-15 20:57     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 14/16] remoteproc: look-up pre-registered carveout by name for carveout allocation Loic Pallardy
2017-12-14  5:34   ` Bjorn Andersson
2018-01-15 20:59     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 15/16] remoteproc: st: associate memory device to memory regions Loic Pallardy
2017-12-14  5:37   ` Bjorn Andersson
2018-01-15 21:04     ` Loic PALLARDY
2017-11-30 16:46 ` [PATCH v2 16/16] rpmsg: virtio: allocate buffer from parent Loic Pallardy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1512060411-729-7-git-send-email-loic.pallardy@st.com \
    --to=loic.pallardy@st.com \
    --cc=arnaud.pouliquen@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®