From: Keerthy <j-keerthy@ti.com>
To: <daniel.lezcano@linaro.org>, <tony@atomide.com>,
<aaro.koskinen@iki.fi>, <thierry.reding@gmail.com>
Cc: <t-kristo@ti.com>, <linux@armlinux.org.uk>,
<grygorii.strashko@ti.com>, <robh+dt@kernel.org>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-pwm@vger.kernel.org>, <sebastian.reichel@collabora.co.uk>,
<ladis@linux-mips.org>, <linux-kernel@vger.kernel.org>,
<j-keerthy@ti.com>
Subject: [PATCH v4 4/8] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource
Date: Fri, 1 Dec 2017 10:46:33 +0530 [thread overview]
Message-ID: <1512105397-2544-5-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1512105397-2544-1-git-send-email-j-keerthy@ti.com>
Move the dmtimer driver out of plat-omap to clocksource.
So that non-omap devices also could use this.
No Code changes done to the driver file.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
---
Changes in v3:
* Added Sebastian's Reviewed-by.
Changes in v2:
* No code changes in this v2 version. Only enhanced patch
statistics for renames.
arch/arm/plat-omap/Kconfig | 6 ------
arch/arm/plat-omap/Makefile | 1 -
drivers/clocksource/Kconfig | 6 ++++++
drivers/clocksource/Makefile | 1 +
{arch/arm/plat-omap => drivers/clocksource}/dmtimer.c | 0
5 files changed, 7 insertions(+), 7 deletions(-)
rename {arch/arm/plat-omap => drivers/clocksource}/dmtimer.c (100%)
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 7276afe..afc1a1d 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,12 +106,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
help
PPA routine service ID for setting L2 auxiliary control register.
-config OMAP_DM_TIMER
- bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
- help
- Select this option if you want to use OMAP Dual-Mode timers.
-
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
depends on ARCH_OMAP1 && OMAP_MUX
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 47e1867..7215ada 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,5 +9,4 @@ obj-y := sram.o dma.o counter_32k.o
# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c729a88..4da66cf 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -46,6 +46,12 @@ config DIGICOLOR_TIMER
help
Enables the support for the digicolor timer driver.
+config OMAP_DM_TIMER
+ bool "Use dual-mode timer"
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+ help
+ Select this option if you want to use Dual-Mode timers.
+
config DW_APB_TIMER
bool "DW APB timer driver" if COMPILE_TEST
help
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 72711f1..b077076 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
+obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
diff --git a/arch/arm/plat-omap/dmtimer.c b/drivers/clocksource/dmtimer.c
similarity index 100%
rename from arch/arm/plat-omap/dmtimer.c
rename to drivers/clocksource/dmtimer.c
--
1.9.1
next prev parent reply other threads:[~2017-12-01 5:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 5:16 [PATCH v4 0/8] omap: dmtimer: Move driver out of plat-omap Keerthy
2017-12-01 5:16 ` [PATCH v4 1/8] clocksource: dmtimer: Remove all the exports Keerthy
2017-12-01 5:16 ` [PATCH v4 2/8] arm: omap: timer: Wrap the inline functions under OMAP2PLUS define Keerthy
2017-12-01 5:16 ` [PATCH v4 3/8] arm: omap: Move dmtimer.h out of plat-omap Keerthy
2017-12-01 5:16 ` Keerthy [this message]
2017-12-07 10:54 ` [PATCH v4 4/8] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource Daniel Lezcano
2017-12-08 3:55 ` Keerthy
2017-12-08 14:31 ` Keerthy
2017-12-08 17:20 ` Ladislav Michl
2017-12-08 17:50 ` Daniel Lezcano
2017-12-08 19:19 ` Ladislav Michl
2017-12-01 5:16 ` [PATCH v4 5/8] dmtimer: Add timer ops to the platform data structure Keerthy
2017-12-01 5:16 ` [PATCH v4 6/8] clocksource: dmtimer: Populate the timer ops to the pdata Keerthy
2017-12-01 5:16 ` [PATCH v4 7/8] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops Keerthy
2017-12-01 5:16 ` [PATCH v4 8/8] arm: omap: pdata-quirks: Remove unused timer pdata Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512105397-2544-5-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=aaro.koskinen@iki.fi \
--cc=daniel.lezcano@linaro.org \
--cc=grygorii.strashko@ti.com \
--cc=ladis@linux-mips.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=robh+dt@kernel.org \
--cc=sebastian.reichel@collabora.co.uk \
--cc=t-kristo@ti.com \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®