From: Jagan Teki <jagannadh.teki@gmail.com>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>, Icenowy Zheng <icenowy@aosc.io>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH 1/2] arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi
Date: Fri, 1 Dec 2017 14:36:04 +0530 [thread overview]
Message-ID: <1512119165-15290-1-git-send-email-jagan@amarulasolutions.com> (raw)
Enable RTL8723BS WiFi chip on a64-olinuxino board:
- WiFi SDIO interface is connected to MMC1
- WiFi REG_ON pin connected to gpio PL2: attach to mmc-pwrseq
- WiFi HOST_WAKE pin connected to gpio PL3
To make rtl8723bs chip to work build it as module to and run
CONFIG_RTL8723BS=m
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../boot/dts/allwinner/sun50i-a64-olinuxino.dts | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 338e7861..8807664 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -57,6 +57,11 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
};
&mmc0 {
@@ -70,6 +75,24 @@
status = "okay";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_aldo2>;
+ vqmmc-supply = <®_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8723bs: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+ interrupt-names = "host-wake";
+ };
+};
+
&r_rsb {
status = "okay";
--
2.7.4
next reply other threads:[~2017-12-01 9:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 9:06 Jagan Teki [this message]
2017-12-01 9:06 ` [PATCH 2/2] arm64: allwinner: a64-sopine: Use dcdc1 regulator instead of vcc3v3 Jagan Teki
2017-12-01 16:03 ` Maxime Ripard
2017-12-01 16:02 ` [PATCH 1/2] arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512119165-15290-1-git-send-email-jagan@amarulasolutions.com \
--to=jagannadh.teki@gmail.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=michael@amarulasolutions.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®