From: NeilBrown <neilb@suse.com>
To: Oleg Drokin <oleg.drokin@intel.com>,
Andreas Dilger <andreas.dilger@intel.com>,
James Simmons <jsimmons@infradead.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: lkml <linux-kernel@vger.kernel.org>,
lustre <lustre-devel@lists.lustre.org>
Subject: [PATCH 16/16] staging: lustre: remove l_wait_event from ptlrpc_set_wait
Date: Mon, 18 Dec 2017 18:18:00 +1100 [thread overview]
Message-ID: <151358148037.5099.1272439971724416652.stgit@noble> (raw)
In-Reply-To: <151358127190.5099.12792810096274074963.stgit@noble>
This is the last remaining use of l_wait_event().
It is the only use of LWI_TIMEOUT_INTR_ALL() which
has a meaning that timeouts can be interrupted.
Only interrupts by "fatal" signals are allowed, so
introduce l_wait_event_abortable_timeout() to
support this.
Signed-off-by: NeilBrown <neilb@suse.com>
---
drivers/staging/lustre/lustre/include/lustre_lib.h | 10 ++
drivers/staging/lustre/lustre/ptlrpc/client.c | 86 ++++++++------------
.../staging/lustre/lustre/ptlrpc/ptlrpc_internal.h | 2
3 files changed, 47 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/lustre/lustre/include/lustre_lib.h b/drivers/staging/lustre/lustre/include/lustre_lib.h
index d157ed35a0bf..b23d3015b1c0 100644
--- a/drivers/staging/lustre/lustre/include/lustre_lib.h
+++ b/drivers/staging/lustre/lustre/include/lustre_lib.h
@@ -440,6 +440,16 @@ do { \
__ret; \
})
+#define l_wait_event_abortable_timeout(wq, condition, timeout) \
+({ \
+ sigset_t __blocked; \
+ int __ret = 0; \
+ __blocked = cfs_block_sigsinv(LUSTRE_FATAL_SIGS); \
+ __ret = wait_event_interruptible_timeout(wq, condition, timeout);\
+ cfs_restore_sigs(__blocked); \
+ __ret; \
+})
+
#define l_wait_event_abortable_exclusive(wq, condition) \
({ \
sigset_t __blocked; \
diff --git a/drivers/staging/lustre/lustre/ptlrpc/client.c b/drivers/staging/lustre/lustre/ptlrpc/client.c
index bb8c9ab68f5f..95131a34a98f 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/client.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/client.c
@@ -1774,7 +1774,7 @@ int ptlrpc_check_set(const struct lu_env *env, struct ptlrpc_request_set *set)
}
/*
- * ptlrpc_set_wait->l_wait_event sets lwi_allow_intr
+ * ptlrpc_set_wait allow signal to abort the timeout
* so it sets rq_intr regardless of individual rpc
* timeouts. The synchronous IO waiting path sets
* rq_intr irrespective of whether ptlrpcd
@@ -2122,10 +2122,9 @@ int ptlrpc_expire_one_request(struct ptlrpc_request *req, int async_unlink)
/**
* Time out all uncompleted requests in request set pointed by \a data
- * Callback used when waiting on sets with l_wait_event.
- * Always returns 1.
+ * Called when wait_event_timeout times out.
*/
-int ptlrpc_expired_set(struct ptlrpc_request_set *set)
+void ptlrpc_expired_set(struct ptlrpc_request_set *set)
{
struct list_head *tmp;
time64_t now = ktime_get_real_seconds();
@@ -2155,18 +2154,6 @@ int ptlrpc_expired_set(struct ptlrpc_request_set *set)
*/
ptlrpc_expire_one_request(req, 1);
}
-
- /*
- * When waiting for a whole set, we always break out of the
- * sleep so we can recalculate the timeout, or enable interrupts
- * if everyone's timed out.
- */
- return 1;
-}
-static int ptlrpc_expired_set_void(void *data)
-{
- struct ptlrpc_request_set *set = data;
- return ptlrpc_expired_set(set);
}
/**
@@ -2182,11 +2169,10 @@ EXPORT_SYMBOL(ptlrpc_mark_interrupted);
/**
* Interrupts (sets interrupted flag) all uncompleted requests in
- * a set \a data. Callback for l_wait_event for interruptible waits.
+ * a set \a data. Called when wait_event_timeout receives signal.
*/
-static void ptlrpc_interrupted_set(void *data)
+static void ptlrpc_interrupted_set(struct ptlrpc_request_set *set)
{
- struct ptlrpc_request_set *set = data;
struct list_head *tmp;
CDEBUG(D_RPCTRACE, "INTERRUPTED SET %p\n", set);
@@ -2256,7 +2242,6 @@ int ptlrpc_set_wait(struct ptlrpc_request_set *set)
{
struct list_head *tmp;
struct ptlrpc_request *req;
- struct l_wait_info lwi;
int rc, timeout;
if (set->set_producer)
@@ -2282,46 +2267,47 @@ int ptlrpc_set_wait(struct ptlrpc_request_set *set)
CDEBUG(D_RPCTRACE, "set %p going to sleep for %d seconds\n",
set, timeout);
- if (timeout == 0 && !signal_pending(current))
+ if (timeout == 0 && !signal_pending(current)) {
/*
* No requests are in-flight (ether timed out
* or delayed), so we can allow interrupts.
* We still want to block for a limited time,
* so we allow interrupts during the timeout.
*/
- lwi = LWI_TIMEOUT_INTR_ALL(HZ,
- ptlrpc_expired_set_void,
- ptlrpc_interrupted_set, set);
- else
+ rc = l_wait_event_abortable_timeout(set->set_waitq,
+ ptlrpc_check_set(NULL, set),
+ HZ);
+ if (rc == 0) {
+ rc = -ETIMEDOUT;
+ ptlrpc_expired_set(set);
+ } else if (rc < 0) {
+ rc = -EINTR;
+ ptlrpc_interrupted_set(set);
+ } else
+ rc = 0;
+ } else {
/*
* At least one request is in flight, so no
* interrupts are allowed. Wait until all
* complete, or an in-flight req times out.
*/
- lwi = LWI_TIMEOUT((timeout ? timeout : 1) * HZ,
- ptlrpc_expired_set_void, set);
-
- rc = l_wait_event(set->set_waitq, ptlrpc_check_set(NULL, set), &lwi);
-
- /*
- * LU-769 - if we ignored the signal because it was already
- * pending when we started, we need to handle it now or we risk
- * it being ignored forever
- */
- if (rc == -ETIMEDOUT && !lwi.lwi_allow_intr &&
- signal_pending(current)) {
- sigset_t blocked_sigs =
- cfs_block_sigsinv(LUSTRE_FATAL_SIGS);
-
- /*
- * In fact we only interrupt for the "fatal" signals
- * like SIGINT or SIGKILL. We still ignore less
- * important signals since ptlrpc set is not easily
- * reentrant from userspace again
- */
- if (signal_pending(current))
- ptlrpc_interrupted_set(set);
- cfs_restore_sigs(blocked_sigs);
+ rc = wait_event_timeout(set->set_waitq,
+ ptlrpc_check_set(NULL, set),
+ (timeout ? timeout : 1) * HZ);
+ if (rc == 0) {
+ ptlrpc_expired_set(set);
+ rc = -ETIMEDOUT;
+ /*
+ * LU-769 - if we ignored the signal
+ * because it was already pending when
+ * we started, we need to handle it
+ * now or we risk it being ignored
+ * forever
+ */
+ if (l_fatal_signal_pending(current))
+ ptlrpc_interrupted_set(set);
+ } else
+ rc = 0;
}
LASSERT(rc == 0 || rc == -EINTR || rc == -ETIMEDOUT);
@@ -2528,7 +2514,7 @@ static int ptlrpc_unregister_reply(struct ptlrpc_request *request, int async)
return 0;
/*
- * We have to l_wait_event() whatever the result, to give liblustre
+ * We have to wait_event_timeout() whatever the result, to give liblustre
* a chance to run reply_in_callback(), and to make sure we've
* unlinked before returning a req to the pool.
*/
diff --git a/drivers/staging/lustre/lustre/ptlrpc/ptlrpc_internal.h b/drivers/staging/lustre/lustre/ptlrpc/ptlrpc_internal.h
index 6dd52d99d454..b7a8d7537a66 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/ptlrpc_internal.h
+++ b/drivers/staging/lustre/lustre/ptlrpc/ptlrpc_internal.h
@@ -68,7 +68,7 @@ void ptlrpc_request_cache_free(struct ptlrpc_request *req);
void ptlrpc_init_xid(void);
void ptlrpc_set_add_new_req(struct ptlrpcd_ctl *pc,
struct ptlrpc_request *req);
-int ptlrpc_expired_set(struct ptlrpc_request_set *set);
+void ptlrpc_expired_set(struct ptlrpc_request_set *set);
int ptlrpc_set_next_timeout(struct ptlrpc_request_set *set);
void ptlrpc_resend_req(struct ptlrpc_request *request);
void ptlrpc_set_bulk_mbits(struct ptlrpc_request *req);
next prev parent reply other threads:[~2017-12-18 7:20 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-18 7:17 [PATCH SERIES 5: 00/16] staging: lustre: use standard wait_event macros NeilBrown
2017-12-18 7:17 ` [PATCH 03/16] staging: lustre: discard cfs_time_seconds() NeilBrown
2017-12-18 7:17 ` [PATCH 01/16] staging: lustre: discard SVC_SIGNAL and related functions NeilBrown
2017-12-18 7:17 ` [PATCH 02/16] staging: lustre: replace simple cases of l_wait_event() with wait_event() NeilBrown
2017-12-18 17:48 ` [lustre-devel] " Patrick Farrell
2017-12-18 21:37 ` NeilBrown
2017-12-18 18:03 ` Patrick Farrell
2017-12-19 10:37 ` Dilger, Andreas
2017-12-19 20:49 ` NeilBrown
2017-12-18 7:17 ` [PATCH 04/16] staging: lustre: use wait_event_timeout() where appropriate NeilBrown
2017-12-18 20:23 ` [lustre-devel] " Patrick Farrell
2017-12-18 7:18 ` [PATCH 14/16] staging: lustre: use explicit poll loop in ptlrpc_service_unlink_rqbd NeilBrown
2017-12-18 7:18 ` [PATCH 10/16] staging: lustre: remove back_to_sleep() and use loops NeilBrown
2017-12-18 7:18 ` [PATCH 12/16] staging: lustre: use wait_event_timeout in ptlrpcd() NeilBrown
2017-12-18 7:18 ` [PATCH 15/16] staging: lustre: use explicit poll loop in ptlrpc_unregister_reply NeilBrown
2017-12-18 21:09 ` [lustre-devel] " Patrick Farrell
2017-12-18 7:18 ` [PATCH 08/16] staging: lustre: open code polling loop instead of using l_wait_event() NeilBrown
2017-12-18 20:55 ` [lustre-devel] " Patrick Farrell
2017-12-18 7:18 ` [PATCH 09/16] staging: lustre: simplify waiting in ptlrpc_invalidate_import() NeilBrown
2017-12-18 7:18 ` [PATCH 07/16] staging: lustre: simplify waiting in ldlm_completion_ast() NeilBrown
2017-12-18 7:18 ` [PATCH 06/16] staging: lustre: simplify l_wait_event when intr handler but no timeout NeilBrown
2017-12-18 7:18 ` NeilBrown [this message]
2017-12-18 7:18 ` [PATCH 11/16] staging: lustre: make polling loop in ptlrpc_unregister_bulk more obvious NeilBrown
2017-12-18 21:03 ` [lustre-devel] " Patrick Farrell
2017-12-18 7:18 ` [PATCH 05/16] staging: lustre: introduce and use l_wait_event_abortable() NeilBrown
2017-12-18 7:18 ` [PATCH 13/16] staging: lustre: improve waiting in sptlrpc_req_refresh_ctx NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151358148037.5099.1272439971724416652.stgit@noble \
--to=neilb@suse.com \
--cc=andreas.dilger@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jsimmons@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lustre-devel@lists.lustre.org \
--cc=oleg.drokin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®