From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752031AbdLYC6w (ORCPT ); Sun, 24 Dec 2017 21:58:52 -0500 Received: from out3140-158.mail.aliyun.com ([42.120.140.158]:57199 "EHLO out3140-158.mail.aliyun.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751909AbdLYC6t (ORCPT ); Sun, 24 Dec 2017 21:58:49 -0500 X-Alimail-AntiSpam: AC=CONTINUE;BC=0.3044882|-1;CH=green;FP=0|0|0|0|0|-1|-1|-1;HT=e02c03272;MF=zhenwei.pi@youruncloud.com;NM=1;PH=DS;RN=6;RT=6;SR=0;TI=SMTPD_---.9t0J1Sn_1514170713; From: "zhenwei.pi" To: linux-kernel@vger.kernel.org, x86@kernel.org Cc: zhenwei.pi@youruncloud.com, tglx@linutronix.de, hpa@zytor.com, mingo@redhat.com Subject: [PATCH] x86/kconfig: remove residual cmdline param "no-hlt" Date: Mon, 25 Dec 2017 10:56:31 +0800 Message-Id: <1514170591-25120-1-git-send-email-zhenwei.pi@youruncloud.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org cmdline param "no-hlt" has been removed in commit 27be457000211a6903968dfce06d5f73f051a217. Signed-off-by: zhenwei.pi --- arch/x86/Kconfig | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d4fc98c..fa9c33c 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2426,19 +2426,18 @@ menuconfig APM 1) make sure that you have enough swap space and that it is enabled. - 2) pass the "no-hlt" option to the kernel - 3) switch on floating point emulation in the kernel and pass + 2) switch on floating point emulation in the kernel and pass the "no387" option to the kernel - 4) pass the "floppy=nodma" option to the kernel - 5) pass the "mem=4M" option to the kernel (thereby disabling + 3) pass the "floppy=nodma" option to the kernel + 4) pass the "mem=4M" option to the kernel (thereby disabling all but the first 4 MB of RAM) - 6) make sure that the CPU is not over clocked. - 7) read the sig11 FAQ at - 8) disable the cache from your BIOS settings - 9) install a fan for the video card or exchange video RAM - 10) install a better fan for the CPU - 11) exchange RAM chips - 12) exchange the motherboard. + 5) make sure that the CPU is not over clocked. + 6) read the sig11 FAQ at + 7) disable the cache from your BIOS settings + 8) install a fan for the video card or exchange video RAM + 9) install a better fan for the CPU + 10) exchange RAM chips + 11) exchange the motherboard. To compile this driver as a module, choose M here: the module will be called apm. -- 2.7.4