From: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
To: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: alex.lemberg@wdc.com, Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Subject: [PATCH v1 8/9] ufs: sysfs: flags
Date: Mon, 25 Dec 2017 10:34:37 +0200 [thread overview]
Message-ID: <1514190878-5571-9-git-send-email-stanislav.nijnikov@wdc.com> (raw)
In-Reply-To: <1514190878-5571-1-git-send-email-stanislav.nijnikov@wdc.com>
Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
---
Documentation/ABI/testing/sysfs-driver-ufs | 65 ++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufs-sysfs.c | 42 +++++++++++++++++++
drivers/scsi/ufs/ufs.h | 14 +++++--
3 files changed, 118 insertions(+), 3 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index 5ff8dfa..832da97 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -597,4 +597,69 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the granularity of the LUN. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
+ The file is read only.
+
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init
+Date: August 2017
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows the device init status. The full information
+ about the flag could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
+Date: August 2017
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether permanent write protection is enabled.
+ The full information about the flag could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
+Date: August 2017
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether write protection is enabled on all
+ logical units configured as power on write protected. The
+ full information about the flag could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
+Date: August 2017
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the device background operations are
+ enabled. The full information about the flag could be
+ found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
+Date: August 2017
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the device life span mode is enabled.
+ The full information about the flag could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
+Date: August 2017
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether physical resource removal is enable.
+ The full information about the flag could be found at
+ UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
+Date: August 2017
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the device is executing internal
+ operation related to real time clock. The full information
+ about the flag could be found at UFS specifications 2.1.
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
+Date: August 2017
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shows whether the device FW update is permanently
+ disabled. The full information about the flag could be found
+ at UFS specifications 2.1.
The file is read only.
\ No newline at end of file
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index dfb4965..fbc9926 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -427,6 +427,47 @@ static const struct attribute_group ufs_sysfs_string_descriptors_group = {
.attrs = ufs_sysfs_string_descriptors,
};
+#define ufs_sysfs_flag_show(_name, _uname) \
+static ssize_t _name##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ bool flag; \
+ struct ufs_hba *hba = dev_get_drvdata(dev); \
+ if (ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
+ QUERY_FLAG_IDN_##_uname, &flag)) \
+ return -EINVAL; \
+ return sprintf(buf, "%s\n", flag ? "true" : "false"); \
+}
+
+#define UFS_FLAG(_name, _uname) \
+ ufs_sysfs_flag_show(_name, _uname) \
+ static DEVICE_ATTR_RO(_name)
+
+UFS_FLAG(device_init, FDEVICEINIT);
+UFS_FLAG(permanent_wpe, PERMANENT_WPE);
+UFS_FLAG(power_on_wpe, PWR_ON_WPE);
+UFS_FLAG(bkops_enable, BKOPS_EN);
+UFS_FLAG(life_span_mode_enable, LIFE_SPAN_MODE_ENABLE);
+UFS_FLAG(phy_resource_removal, FPHYRESOURCEREMOVAL);
+UFS_FLAG(busy_rtc, BUSY_RTC);
+UFS_FLAG(disable_fw_update, PERMANENTLY_DISABLE_FW_UPDATE);
+
+static struct attribute *ufs_sysfs_device_flags[] = {
+ &dev_attr_device_init.attr,
+ &dev_attr_permanent_wpe.attr,
+ &dev_attr_power_on_wpe.attr,
+ &dev_attr_bkops_enable.attr,
+ &dev_attr_life_span_mode_enable.attr,
+ &dev_attr_phy_resource_removal.attr,
+ &dev_attr_busy_rtc.attr,
+ &dev_attr_disable_fw_update.attr,
+ NULL,
+};
+
+static const struct attribute_group ufs_sysfs_flags_group = {
+ .name = "flags",
+ .attrs = ufs_sysfs_device_flags,
+};
static const struct attribute_group *ufs_sysfs_groups[] = {
&ufs_sysfs_device_descriptor_group,
@@ -435,6 +476,7 @@ static const struct attribute_group *ufs_sysfs_groups[] = {
&ufs_sysfs_health_descriptor_group,
&ufs_sysfs_power_descriptor_group,
&ufs_sysfs_string_descriptors_group,
+ &ufs_sysfs_flags_group,
NULL,
};
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 7387059..df5e73e 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -130,9 +130,17 @@ enum {
/* Flag idn for Query Requests*/
enum flag_idn {
- QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
- QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
- QUERY_FLAG_IDN_BKOPS_EN = 0x04,
+ QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
+ QUERY_FLAG_IDN_PERMANENT_WPE = 0x02,
+ QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
+ QUERY_FLAG_IDN_BKOPS_EN = 0x04,
+ QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE = 0x05,
+ QUERY_FLAG_IDN_PURGE_ENABLE = 0x06,
+ QUERY_FLAG_IDN_RESERVED2 = 0x07,
+ QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL = 0x08,
+ QUERY_FLAG_IDN_BUSY_RTC = 0x09,
+ QUERY_FLAG_IDN_RESERVED3 = 0x0A,
+ QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B,
};
/* Attribute idn for Query requests */
--
2.7.4
next prev parent reply other threads:[~2017-12-25 8:35 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-25 8:34 [PATCH v1 0/9] ufs: sysfs: read-only access to device descriptors, attributes and flags Stanislav Nijnikov
2017-12-25 8:34 ` [PATCH v1 1/9] ufs: sysfs: device descriptor Stanislav Nijnikov
2017-12-26 1:57 ` kbuild test robot
2017-12-26 2:47 ` kbuild test robot
2017-12-25 8:34 ` [PATCH v1 2/9] ufs: sysfs: interconnect descriptor Stanislav Nijnikov
2017-12-25 8:34 ` [PATCH v1 3/9] ufs: sysfs: geometry descriptor Stanislav Nijnikov
2017-12-25 8:34 ` [PATCH v1 4/9] ufs: sysfs: health descriptor Stanislav Nijnikov
2017-12-25 8:34 ` [PATCH v1 5/9] ufs: sysfs: power descriptor Stanislav Nijnikov
2017-12-25 8:34 ` [PATCH v1 6/9] ufs: sysfs: string descriptors Stanislav Nijnikov
2017-12-26 4:45 ` kbuild test robot
2017-12-25 8:34 ` [PATCH v1 7/9] ufs: sysfs: unit descriptor Stanislav Nijnikov
2017-12-26 8:22 ` kbuild test robot
2017-12-25 8:34 ` Stanislav Nijnikov [this message]
2017-12-26 12:29 ` [PATCH v1 8/9] ufs: sysfs: flags kbuild test robot
2017-12-25 8:34 ` [PATCH v1 9/9] ufs: sysfs: attributes Stanislav Nijnikov
2017-12-26 16:58 ` kbuild test robot
2017-12-27 13:49 [PATCH v1 0/9] ufs: sysfs: read-only access to device descriptors, attributes and flags Stanislav Nijnikov
2017-12-27 13:49 ` [PATCH v1 8/9] ufs: sysfs: flags Stanislav Nijnikov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1514190878-5571-9-git-send-email-stanislav.nijnikov@wdc.com \
--to=stanislav.nijnikov@wdc.com \
--cc=alex.lemberg@wdc.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®