From: Jerome Brunet <jbrunet@baylibre.com>
To: Yixun Lan <yixun.lan@amlogic.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Carlo Caione <carlo@caione.org>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/6] ARM64: dts: meson-axg: uart: Add the pinctrl info description
Date: Fri, 05 Jan 2018 11:28:43 +0100 [thread overview]
Message-ID: <1515148123.5048.22.camel@baylibre.com> (raw)
In-Reply-To: <20180105095621.196472-5-yixun.lan@amlogic.com>
On Fri, 2018-01-05 at 17:56 +0800, Yixun Lan wrote:
> Describe the pinctrl info for the UART controller which
is
> found
> in the Meson-AXG SoCs.
Yixun,
Could you please review this patch again. Some "strings" used here will
obviously not work. I've picked up a few but I'm pretty sure there are other ...
Thanks
>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 96 ++++++++++++++++++++++++++++++
> 1 file changed, 96 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index f6bf01cfff4b..78bb206e2897 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -303,6 +303,70 @@
> function = "pwm_d";
> };
> };
> +
> + uart_a_pins: uart_a {
> + mux {
> + groups = "uart_tx_a",
> + "uart_rx_a";
> + function = "uart_a";
> + };
> + };
> +
> + uart_a_cts_rts_pins: uart_a_cts_rts {
> + mux {
> + groups = "uart_ctx_a",
uart_ctx_a does not exist in pinctrl
> + "uart_rts_a";
> + function = "uart_a";
> + };
> + };
> +
> + uart_b_x_pins: uart_b_x {
> + mux {
> + groups = "uart_tx_b_x",
> + "uart_rx_b_x";
> + function = "uart_b";
> + };
> + };
> +
> + uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
> + mux {
> + groups = "uart_cts_b_x",
> + "uart_rts_b_x";
> + function = "uart_b";
> + };
> + };
> +
> + uart_b_z_pins: uart_b_z {
> + mux {
> + groups = "uart_tx_b_z",
> + "uart_rx_b_z";
> + function = "uart_b";
> + };
> + };
> +
> + uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
> + mux {
> + groups = "uart_cts_b_z",
> + "uart_rts_b_z";
> + function = "uart_b";
> + };
> + };
> +
> + uart_ao_b_z_pins: uart_ao_b_z {
> + mux {
> + groups = "uart_ao_tx_b_z",
> + "uart_ao_rx_b_z";
> + function = "uart_ao_b_groupz";
"uart_ao_b_groupz" function does not exist in pinctrl
> + };
> + };
> +
> + uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
> + mux {
> + groups = "uart_ao_cts_b_z",
> + "uart_ao_rts_b_z";
> + function = "uart_ao_b_groupz";
> + };
> + };
> };
> };
>
> @@ -346,6 +410,38 @@
> #gpio-cells = <2>;
> gpio-ranges = <&pinctrl_aobus 0 0 15>;
> };
> +
> + uart_ao_a_pins: uart_ao_a {
> + mux {
> + groups = "uart_ao_tx_a",
> + "uart_ao_rx_a";
> + function = "uart_ao_a";
> + };
> + };
> +
> + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
> + mux {
> + groups = "uart_ao_cts_a",
> + "uart_ao_rts_a";
> + function = "uart_ao_a";
> + };
> + };
> +
> + uart_ao_b_pins: uart_ao_b {
> + mux {
> + groups = "uart_ao_tx_b",
> + "uart_ao_rx_b";
> + function = "uart_ao_b";
> + };
> + };
> +
> + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
> + mux {
> + groups = "uart_ao_cts_b",
> + "uart_ao_rts_b";
> + function = "uart_ao_b";
> + };
> + };
> };
>
> pwm_AO_ab: pwm@7000 {
next prev parent reply other threads:[~2018-01-05 10:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-05 9:56 [PATCH 0/6] ARM64: dts: meson-axg: UART DT updates Yixun Lan
2018-01-05 9:56 ` [PATCH 1/6] ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART Yixun Lan
2018-01-05 10:30 ` Jerome Brunet
2018-01-05 13:11 ` Yixun Lan
2018-01-05 9:56 ` [PATCH 2/6] ARM64: dts: meson-axg: uart: fix address space range Yixun Lan
2018-01-05 10:30 ` Jerome Brunet
2018-01-05 13:43 ` Yixun Lan
2018-01-05 9:56 ` [PATCH 3/6] ARM64: dts: meson-axg: uart: Add the clock info description Yixun Lan
2018-01-05 10:29 ` Jerome Brunet
2018-01-05 9:56 ` [PATCH 4/6] ARM64: dts: meson-axg: uart: Add the pinctrl " Yixun Lan
2018-01-05 10:28 ` Jerome Brunet [this message]
2018-01-05 14:22 ` Yixun Lan
2018-01-05 9:56 ` [PATCH 5/6] arm64: dts: meson-axg: complete the pinctrl info for UART_AO_A Yixun Lan
2018-01-05 10:27 ` Jerome Brunet
2018-01-05 9:56 ` [PATCH 6/6] ARM64: dts: meson-axg: enable the UART_A controller Yixun Lan
2018-01-05 10:27 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515148123.5048.22.camel@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=yixun.lan@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome