[PATCH 1/3] ARM: dts: imx6ul-evk: Add support for mag3110 sensor

[Marco Franchi <marco.franchi@nxp.com>]

The i.MX 6UL EVK has a MAG3110 Magnetometer sensor in its base board.
Add support for this sensor, which is included in the trivial i2c devices 
and according to the bindings documentation, just need a compatible field 
and an address.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index 18fdb08..cb33baa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -140,6 +140,17 @@
 	};
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	mag3110@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+	};
+};
 
 &lcdif {
 	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
-- 
2.7.4