mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Javier González" <jg@lightnvm.io>
To: mb@lightnvm.io
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Hans Holmberg" <hans.holmberg@cnexlabs.com>,
	"Javier González" <javier@cnexlabs.com>
Subject: [PATCH 4/5] lightnvm: pblk: add padding distribution sysfs attribute
Date: Wed, 31 Jan 2018 03:06:50 +0100	[thread overview]
Message-ID: <1517364411-22386-4-git-send-email-javier@cnexlabs.com> (raw)
In-Reply-To: <1517364411-22386-1-git-send-email-javier@cnexlabs.com>

From: Hans Holmberg <hans.holmberg@cnexlabs.com>

When pblk receives a sync, all data up to that point in the write buffer
must be comitted to persistent storage, and as flash memory comes with a
minimal write size there is a significant cost involved both in terms
of time for completing the sync and in terms of write amplification
padded sectors for filling up to the minimal write size.

In order to get a better understanding of the costs involved for syncs,
Add a sysfs attribute to pblk: padded_dist, showing a normalized
distribution of sectors padded. In order to facilitate measurements of
specific workloads during the lifetime of the pblk instance, the
distribution can be reset by writing 0 to the attribute.

Do this by introducing counters for each possible padding:
{0..(minimal write size - 1)} and calculate the normalized distribution
when showing the attribute.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
---
 drivers/lightnvm/pblk-init.c  | 16 ++++++++--
 drivers/lightnvm/pblk-rb.c    | 15 +++++-----
 drivers/lightnvm/pblk-sysfs.c | 68 +++++++++++++++++++++++++++++++++++++++++++
 drivers/lightnvm/pblk.h       |  6 +++-
 4 files changed, 95 insertions(+), 10 deletions(-)

diff --git a/drivers/lightnvm/pblk-init.c b/drivers/lightnvm/pblk-init.c
index 7eedc5daebc8..a5e3510c0f38 100644
--- a/drivers/lightnvm/pblk-init.c
+++ b/drivers/lightnvm/pblk-init.c
@@ -921,6 +921,7 @@ static void pblk_free(struct pblk *pblk)
 {
 	pblk_luns_free(pblk);
 	pblk_lines_free(pblk);
+	kfree(pblk->pad_dist);
 	pblk_line_meta_free(pblk);
 	pblk_core_free(pblk);
 	pblk_l2p_free(pblk);
@@ -998,11 +999,13 @@ static void *pblk_init(struct nvm_tgt_dev *dev, struct gendisk *tdisk,
 	pblk->pad_rst_wa = 0;
 	pblk->gc_rst_wa = 0;
 
+	atomic_long_set(&pblk->nr_flush, 0);
+	pblk->nr_flush_rst = 0;
+
 #ifdef CONFIG_NVM_DEBUG
 	atomic_long_set(&pblk->inflight_writes, 0);
 	atomic_long_set(&pblk->padded_writes, 0);
 	atomic_long_set(&pblk->padded_wb, 0);
-	atomic_long_set(&pblk->nr_flush, 0);
 	atomic_long_set(&pblk->req_writes, 0);
 	atomic_long_set(&pblk->sub_writes, 0);
 	atomic_long_set(&pblk->sync_writes, 0);
@@ -1034,10 +1037,17 @@ static void *pblk_init(struct nvm_tgt_dev *dev, struct gendisk *tdisk,
 		goto fail_free_luns;
 	}
 
+	pblk->pad_dist = kzalloc((pblk->min_write_pgs - 1) * sizeof(atomic64_t),
+				 GFP_KERNEL);
+	if (!pblk->pad_dist) {
+		ret = -ENOMEM;
+		goto fail_free_line_meta;
+	}
+
 	ret = pblk_core_init(pblk);
 	if (ret) {
 		pr_err("pblk: could not initialize core\n");
-		goto fail_free_line_meta;
+		goto fail_free_pad_dist;
 	}
 
 	ret = pblk_l2p_init(pblk);
@@ -1097,6 +1107,8 @@ static void *pblk_init(struct nvm_tgt_dev *dev, struct gendisk *tdisk,
 	pblk_l2p_free(pblk);
 fail_free_core:
 	pblk_core_free(pblk);
+fail_free_pad_dist:
+	kfree(pblk->pad_dist);
 fail_free_line_meta:
 	pblk_line_meta_free(pblk);
 fail_free_luns:
diff --git a/drivers/lightnvm/pblk-rb.c b/drivers/lightnvm/pblk-rb.c
index 7044b5599cc4..264372d7b537 100644
--- a/drivers/lightnvm/pblk-rb.c
+++ b/drivers/lightnvm/pblk-rb.c
@@ -437,9 +437,7 @@ static int pblk_rb_may_write_flush(struct pblk_rb *rb, unsigned int nr_entries,
 	if (bio->bi_opf & REQ_PREFLUSH) {
 		struct pblk *pblk = container_of(rb, struct pblk, rwb);
 
-#ifdef CONFIG_NVM_DEBUG
 		atomic_long_inc(&pblk->nr_flush);
-#endif
 		if (pblk_rb_flush_point_set(&pblk->rwb, bio, mem))
 			*io_ret = NVM_IO_OK;
 	}
@@ -620,14 +618,17 @@ unsigned int pblk_rb_read_to_bio(struct pblk_rb *rb, struct nvm_rq *rqd,
 			pr_err("pblk: could not pad page in write bio\n");
 			return NVM_IO_ERR;
 		}
+
+		if (pad < pblk->min_write_pgs)
+			atomic64_inc(&pblk->pad_dist[pad - 1]);
+		else
+			pr_warn("pblk: padding more than min. sectors\n");
+
+		atomic64_add(pad, &pblk->pad_wa);
 	}
 
-	atomic64_add(pad, &((struct pblk *)
-			(container_of(rb, struct pblk, rwb)))->pad_wa);
-
 #ifdef CONFIG_NVM_DEBUG
-	atomic_long_add(pad, &((struct pblk *)
-			(container_of(rb, struct pblk, rwb)))->padded_writes);
+	atomic_long_add(pad, &pblk->padded_writes);
 #endif
 
 	return NVM_IO_OK;
diff --git a/drivers/lightnvm/pblk-sysfs.c b/drivers/lightnvm/pblk-sysfs.c
index 4804bbd32d5f..f902ac00d071 100644
--- a/drivers/lightnvm/pblk-sysfs.c
+++ b/drivers/lightnvm/pblk-sysfs.c
@@ -341,6 +341,38 @@ static ssize_t pblk_sysfs_get_write_amp_trip(struct pblk *pblk, char *page)
 		atomic64_read(&pblk->pad_wa) - pblk->pad_rst_wa, page);
 }
 
+static ssize_t pblk_sysfs_get_padding_dist(struct pblk *pblk, char *page)
+{
+	int sz = 0;
+	unsigned long long total;
+	unsigned long long total_buckets = 0;
+	int buckets = pblk->min_write_pgs - 1;
+	int i;
+
+	total = atomic64_read(&pblk->nr_flush) - pblk->nr_flush_rst;
+
+	for (i = 0; i < buckets; i++)
+		total_buckets += atomic64_read(&pblk->pad_dist[i]);
+
+	if (!total) {
+		for (i = 0; i < (buckets + 1); i++)
+			sz += snprintf(page + sz, PAGE_SIZE - sz,
+				"%d:0 ", i);
+		sz += snprintf(page + sz, PAGE_SIZE - sz, "\n");
+
+		return sz;
+	}
+
+	sz += snprintf(page + sz, PAGE_SIZE - sz, "0:%lld%% ",
+		((total - total_buckets) * 100) / total);
+	for (i = 0; i < buckets; i++)
+		sz += snprintf(page + sz, PAGE_SIZE - sz, "%d:%lld%% ", i + 1,
+			(atomic64_read(&pblk->pad_dist[i]) * 100) / total);
+	sz += snprintf(page + sz, PAGE_SIZE - sz, "\n");
+
+	return sz;
+}
+
 #ifdef CONFIG_NVM_DEBUG
 static ssize_t pblk_sysfs_stats_debug(struct pblk *pblk, char *page)
 {
@@ -427,6 +459,32 @@ static ssize_t pblk_sysfs_set_write_amp_trip(struct pblk *pblk,
 }
 
 
+static ssize_t pblk_sysfs_set_padding_dist(struct pblk *pblk,
+			const char *page, size_t len)
+{
+	size_t c_len;
+	int reset_value;
+	int buckets = pblk->min_write_pgs - 1;
+	int i;
+
+	c_len = strcspn(page, "\n");
+	if (c_len >= len)
+		return -EINVAL;
+
+	if (kstrtouint(page, 0, &reset_value))
+		return -EINVAL;
+
+	if (reset_value !=  0)
+		return -EINVAL;
+
+	for (i = 0; i < buckets; i++)
+		atomic64_set(&pblk->pad_dist[i], 0);
+
+	pblk->nr_flush_rst = atomic64_read(&pblk->nr_flush);
+
+	return len;
+}
+
 static struct attribute sys_write_luns = {
 	.name = "write_luns",
 	.mode = 0444,
@@ -487,6 +545,11 @@ static struct attribute sys_write_amp_trip = {
 	.mode = 0644,
 };
 
+static struct attribute sys_padding_dist = {
+	.name = "padding_dist",
+	.mode = 0644,
+};
+
 #ifdef CONFIG_NVM_DEBUG
 static struct attribute sys_stats_debug_attr = {
 	.name = "stats",
@@ -507,6 +570,7 @@ static struct attribute *pblk_attrs[] = {
 	&sys_lines_info_attr,
 	&sys_write_amp_mileage,
 	&sys_write_amp_trip,
+	&sys_padding_dist,
 #ifdef CONFIG_NVM_DEBUG
 	&sys_stats_debug_attr,
 #endif
@@ -540,6 +604,8 @@ static ssize_t pblk_sysfs_show(struct kobject *kobj, struct attribute *attr,
 		return pblk_sysfs_get_write_amp_mileage(pblk, buf);
 	else if (strcmp(attr->name, "write_amp_trip") == 0)
 		return pblk_sysfs_get_write_amp_trip(pblk, buf);
+	else if (strcmp(attr->name, "padding_dist") == 0)
+		return pblk_sysfs_get_padding_dist(pblk, buf);
 #ifdef CONFIG_NVM_DEBUG
 	else if (strcmp(attr->name, "stats") == 0)
 		return pblk_sysfs_stats_debug(pblk, buf);
@@ -558,6 +624,8 @@ static ssize_t pblk_sysfs_store(struct kobject *kobj, struct attribute *attr,
 		return pblk_sysfs_set_sec_per_write(pblk, buf, len);
 	else if (strcmp(attr->name, "write_amp_trip") == 0)
 		return pblk_sysfs_set_write_amp_trip(pblk, buf, len);
+	else if (strcmp(attr->name, "padding_dist") == 0)
+		return pblk_sysfs_set_padding_dist(pblk, buf, len);
 	return 0;
 }
 
diff --git a/drivers/lightnvm/pblk.h b/drivers/lightnvm/pblk.h
index 4b7d8618631f..88720e2441c0 100644
--- a/drivers/lightnvm/pblk.h
+++ b/drivers/lightnvm/pblk.h
@@ -626,12 +626,16 @@ struct pblk {
 	u64 gc_rst_wa;
 	u64 pad_rst_wa;
 
+	/* Counters used for calculating padding distribution */
+	atomic64_t *pad_dist;		/* Padding distribution buckets */
+	u64 nr_flush_rst;		/* Flushes reset value for pad dist.*/
+	atomic_long_t nr_flush;		/* Number of flush/fua I/O */
+
 #ifdef CONFIG_NVM_DEBUG
 	/* Non-persistent debug counters, 4kb sector I/Os */
 	atomic_long_t inflight_writes;	/* Inflight writes (user and gc) */
 	atomic_long_t padded_writes;	/* Sectors padded due to flush/fua */
 	atomic_long_t padded_wb;	/* Sectors padded in write buffer */
-	atomic_long_t nr_flush;		/* Number of flush/fua I/O */
 	atomic_long_t req_writes;	/* Sectors stored on write buffer */
 	atomic_long_t sub_writes;	/* Sectors submitted from buffer */
 	atomic_long_t sync_writes;	/* Sectors synced to media */
-- 
2.7.4

  parent reply	other threads:[~2018-01-31  2:07 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-31  2:06 [PATCH 1/5] lightnvm: pblk: handle bad sectors in the emeta area correctly Javier González
2018-01-31  2:06 ` [PATCH 2/5] lightnvm: pblk: check data lines version on recovery Javier González
2018-01-31  2:06 ` [PATCH 3/5] lightnvm: pblk: export write amplification counters to sysfs Javier González
2018-01-31  2:06 ` Javier González [this message]
2018-01-31  8:44   ` [PATCH 4/5] lightnvm: pblk: add padding distribution sysfs attribute Matias Bjørling
2018-02-06  9:27     ` Hans Holmberg
2018-02-06 10:50       ` Matias Bjørling
2018-02-06 11:28         ` Hans Holmberg
2018-01-31  2:06 ` [PATCH 5/5] lightnvm: pblk: refactor bad block identification Javier González
2018-01-31  8:51   ` Matias Bjørling
2018-01-31  9:13     ` Javier Gonzalez
2018-01-31 18:24       ` Matias Bjørling
2018-02-04 10:37         ` Javier Gonzalez
2018-02-04 12:54           ` Matias Bjørling
2018-02-04 13:09             ` Javier Gonzalez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1517364411-22386-4-git-send-email-javier@cnexlabs.com \
    --to=jg@lightnvm.io \
    --cc=hans.holmberg@cnexlabs.com \
    --cc=javier@cnexlabs.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mb@lightnvm.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®