From: Amelie Delaunay <amelie.delaunay@st.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Amelie Delaunay <amelie.delaunay@st.com>
Subject: [PATCH 1/2] dt-bindings: phy: add support for STM32 USB PHY Controller (USBPHYC)
Date: Mon, 12 Feb 2018 13:35:28 +0100 [thread overview]
Message-ID: <1518438929-5254-2-git-send-email-amelie.delaunay@st.com> (raw)
In-Reply-To: <1518438929-5254-1-git-send-email-amelie.delaunay@st.com>
This patch adds the device tree bindings description for STM32 USBPHYC
(USB PHY Controller).
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
.../devicetree/bindings/phy/phy-stm32-usbphyc.txt | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
new file mode 100644
index 0000000..1e65e0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
@@ -0,0 +1,46 @@
+STMicroelectronics STM32 USB HS PHY controller
+
+The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
+switch. It controls PHY configuration and status, and the UTMI+ switch that
+selects either OTG or HOST controller for the second PHY port. It also sets
+PLL configuration.
+
+USBPHYC
+ |_ PLL
+ |
+ |_ PHY port#1 _________________ HOST controller
+ | |
+ |_ PHY port#2_______ |
+ | |_ |
+ |_ UTMI switch_____/ 1|________________|
+ | |________________
+ \_0| |
+ OTG controller
+
+Required properties:
+- compatible: must be "st,stm32mp1-usbphyc"
+- reg: address and length of the usb phy control register set
+- clocks: phandle + clock specifier for the PLL phy clock
+- phy-supply: from the generic phy bindings, phandle to the regulator
+ providing 3V3 power to the PHY, see phy-bindings.txt
+- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
+- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
+
+Optional properties:
+- assigned-clocks: phandle + clock specifier for the PLL phy clock
+- assigned-clock-parents: the PLL phy clock parent
+- resets: phandle + reset specifier
+- st,port2-switch-to-host: select HOST controller on UTMI switch for port#2
+
+
+Example:
+ usbphyc: usbphyc@5a006000 {
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc_clk USBPHY_K>;
+ resets = <&rcc_rst USBPHY_R>;
+ st,port2-switch-to-host;
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>
+ };
--
2.7.4
next prev parent reply other threads:[~2018-02-12 12:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-12 12:35 [PATCH 0/2] Introduce STM32 USB PHY Controller driver Amelie Delaunay
2018-02-12 12:35 ` Amelie Delaunay [this message]
2018-02-19 1:51 ` [PATCH 1/2] dt-bindings: phy: add support for STM32 USB PHY Controller (USBPHYC) Rob Herring
2018-02-20 9:40 ` Amelie DELAUNAY
2018-02-12 12:35 ` [PATCH 2/2] phy: stm32: " Amelie Delaunay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1518438929-5254-2-git-send-email-amelie.delaunay@st.com \
--to=amelie.delaunay@st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®