From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965438AbeBMRtN (ORCPT ); Tue, 13 Feb 2018 12:49:13 -0500 Received: from mail.kernel.org ([198.145.29.99]:42296 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965057AbeBMRtI (ORCPT ); Tue, 13 Feb 2018 12:49:08 -0500 DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org B0432217C5 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=kbingham@kernel.org From: Kieran Bingham To: linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-renesas-soc@vger.kernel.org Cc: Kieran Bingham , Jean-Michel Hautbois , Sergei Shtylyov , Lars-Peter Clausen , Kieran Bingham Subject: [PATCH v4 3/5] [RFT] ARM: dts: wheat: Fix ADV7513 address usage Date: Tue, 13 Feb 2018 17:48:55 +0000 Message-Id: <1518544137-2742-4-git-send-email-kbingham@kernel.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1518544137-2742-1-git-send-email-kbingham@kernel.org> References: <1518544137-2742-1-git-send-email-kbingham@kernel.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Kieran Bingham The r8a7792 Wheat board has two ADV7513 devices sharing a single I2C bus, however in low power mode the ADV7513 will reset it's slave maps to use the hardware defined default addresses. The ADV7511 driver was adapted to allow the two devices to be registered correctly - but it did not take into account the fault whereby the devices reset the addresses. This results in an address conflict between the device using the default addresses, and the other device if it is in low-power-mode. Repair this issue by moving both devices away from the default address definitions. Signed-off-by: Kieran Bingham Reviewed-by: Laurent Pinchart --- v2: - Addition to series v3: - Split map register addresses into individual declarations. v4: - Normalise I2C usage arch/arm/boot/dts/r8a7792-wheat.dts | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index b9471b67b728..42fff8837eab 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -240,9 +240,16 @@ status = "okay"; clock-frequency = <400000>; + /* + * The adv75xx resets its addresses to defaults during low power power + * mode. Because we have two ADV7513 devices on the same bus, we must + * change both of them away from the defaults so that they do not + * conflict. + */ hdmi@3d { compatible = "adi,adv7513"; - reg = <0x3d>; + reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>; + reg-names = "main", "cec", "edid", "packet"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; @@ -272,7 +279,8 @@ hdmi@39 { compatible = "adi,adv7513"; - reg = <0x39>; + reg = <0x39>, <0x29>, <0x49>, <0x59>; + reg-names = "main", "cec", "edid", "packet"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; -- 2.7.4