[Outreachy kernel] [PATCH NAND] mtd: nand: Replace printk() with appropriate dev_*macro()

[Shreeya Patel <shreeya.patel23498@gmail.com>]

Replace printks having a log level with the appropriate
dev_*macro.
Also, use pdev->dev as it is guaranteed in each case to be
properly initialized when passed into dev_*macro().

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
---
 drivers/mtd/nand/ams-delta.c | 6 ++++--
 drivers/mtd/nand/cafe_nand.c | 5 +++--
 drivers/mtd/nand/sh_flctl.c  | 2 +-
 3 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index dcec9cf..2419ca8 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -185,7 +185,8 @@ static int ams_delta_init(struct platform_device *pdev)
 	/* Allocate memory for MTD device structure and private data */
 	this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
 	if (!this) {
-		printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n");
+		dev_warn(&pdev->dev,
+			 "Unable to allocate E3 NAND MTD device structure.\n");
 		err = -ENOMEM;
 		goto out;
 	}
@@ -219,7 +220,8 @@ static int ams_delta_init(struct platform_device *pdev)
 		this->dev_ready = ams_delta_nand_ready;
 	} else {
 		this->dev_ready = NULL;
-		printk(KERN_NOTICE "Couldn't request gpio for Delta NAND ready.\n");
+		dev_notice(&pdev->dev,
+			   "Couldn't request gpio for Delta NAND ready.\n");
 	}
 	/* 25 us command delay time */
 	this->chip_delay = 30;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index bc558c4..51f58ea 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -773,8 +773,9 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 		cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
 		cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
 	} else {
-		printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
-		       mtd->writesize);
+		dev_warn(&cafe->pdev->dev,
+			 "Unexpected NAND flash writesize %d. Aborting\n",
+			 mtd->writesize);
 		goto out_free_dma;
 	}
 	cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index e7f3c98..c534c49 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -877,7 +877,7 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 			else if (!flctl->seqin_column)
 				execmd_write_page_sector(mtd);
 			else
-				printk(KERN_ERR "Invalid address !?\n");
+				dev_err(&flctl->pdev->dev, "Invalid address !?\n");
 			break;
 		}
 		set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
-- 
2.7.4

-- 
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
To post to this group, send email to outreachy-kernel@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1519046339-9678-1-git-send-email-shreeya.patel23498%40gmail.com.
For more options, visit https://groups.google.com/d/optout.