[PATCH] usb: phy-generic: Use gpiod_set_value_cansleep

[Mike Looijmans <mike.looijmans@topic.nl>]

The nop_reset and shutdown methods are called in a context that can sleep,
so use gpiod_set_value_cansleep instead of gpiod_set_value.

If you've connected the reset line to a GPIO expander, you'd get a kernel
"slowpath" warning with gpiod_set_value.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
 drivers/usb/phy/phy-generic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 74ba882..a53b89b 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -63,9 +63,9 @@ static void nop_reset(struct usb_phy_generic *nop)
 	if (!nop->gpiod_reset)
 		return;
 
-	gpiod_set_value(nop->gpiod_reset, 1);
+	gpiod_set_value_cansleep(nop->gpiod_reset, 1);
 	usleep_range(10000, 20000);
-	gpiod_set_value(nop->gpiod_reset, 0);
+	gpiod_set_value_cansleep(nop->gpiod_reset, 0);
 }
 
 /* interface to regulator framework */
@@ -159,7 +159,7 @@ void usb_gen_phy_shutdown(struct usb_phy *phy)
 {
 	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
 
-	gpiod_set_value(nop->gpiod_reset, 1);
+	gpiod_set_value_cansleep(nop->gpiod_reset, 1);
 
 	if (!IS_ERR(nop->clk))
 		clk_disable_unprepare(nop->clk);
-- 
1.9.1