From: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
To: linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Sai Praneeth <sai.praneeth.prakhya@intel.com>,
"Lee, Chun-Yi" <jlee@suse.com>, Borislav Petkov <bp@alien8.de>,
Tony Luck <tony.luck@intel.com>,
Will Deacon <will.deacon@arm.com>,
Dave Hansen <dave.hansen@intel.com>,
Mark Rutland <mark.rutland@arm.com>,
Bhupesh Sharma <bhsharma@redhat.com>,
Ricardo Neri <ricardo.neri@intel.com>,
Ravi Shankar <ravi.v.shankar@intel.com>,
Matt Fleming <matt@codeblueprint.co.uk>,
Peter Zijlstra <peter.zijlstra@intel.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Dan Williams <dan.j.williams@intel.com>
Subject: [PATCH V1 1/3] x86/efi: Call efi_delete_dummy_variable() during efi subsystem initialization
Date: Sat, 24 Feb 2018 14:10:47 -0800 [thread overview]
Message-ID: <1519510249-31447-2-git-send-email-sai.praneeth.prakhya@intel.com> (raw)
In-Reply-To: <1519510249-31447-1-git-send-email-sai.praneeth.prakhya@intel.com>
From: Sai Praneeth <sai.praneeth.prakhya@intel.com>
Invoking efi_runtime_services() through efi_workqueue means all accesses
to efi_runtime_services() should be done after efi_rts_wq has been
created. efi_delete_dummy_variable() calls set_variable(), hence
efi_delete_dummy_variable() should be called after efi_rts_wq has been
created.
efi_delete_dummy_variable() is called from efi_enter_virtual_mode()
which is early in the boot phase (efi_rts_wq isn't created yet), so call
efi_delete_dummy_variable() later in the boot phase i.e. while
initializing efi subsystem. In the next patch, this is the place where
we create efi_rts_wq and all the efi_runtime_services() will be called
using efi_rts_wq.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Cc: Lee, Chun-Yi <jlee@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peter.zijlstra@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dan Williams <dan.j.williams@intel.com>
---
arch/x86/include/asm/efi.h | 1 -
arch/x86/platform/efi/efi.c | 6 ------
drivers/firmware/efi/efi.c | 7 +++++++
include/linux/efi.h | 3 +++
4 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 85f6ccb80b91..34b03440a80f 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -130,7 +130,6 @@ extern void __init efi_runtime_update_mappings(void);
extern void __init efi_dump_pagetable(void);
extern void __init efi_apply_memmap_quirks(void);
extern int __init efi_reuse_config(u64 tables, int nr_tables);
-extern void efi_delete_dummy_variable(void);
struct efi_setup_data {
u64 fw_vendor;
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 9061babfbc83..a3169d14583f 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -893,9 +893,6 @@ static void __init kexec_enter_virtual_mode(void)
if (efi_enabled(EFI_OLD_MEMMAP) && (__supported_pte_mask & _PAGE_NX))
runtime_code_page_mkexec();
-
- /* clean DUMMY object */
- efi_delete_dummy_variable();
#endif
}
@@ -1015,9 +1012,6 @@ static void __init __efi_enter_virtual_mode(void)
* necessary relocation fixups for the new virtual addresses.
*/
efi_runtime_update_mappings();
-
- /* clean DUMMY object */
- efi_delete_dummy_variable();
}
void __init efi_enter_virtual_mode(void)
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index cd42f66a7c85..ac5db5f8dbbf 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -33,6 +33,7 @@
#include <linux/memblock.h>
#include <asm/early_ioremap.h>
+#include <asm/efi.h>
struct efi __read_mostly efi = {
.mps = EFI_INVALID_TABLE_ADDR,
@@ -328,6 +329,12 @@ static int __init efisubsys_init(void)
if (!efi_enabled(EFI_BOOT))
return 0;
+ /*
+ * Clean DUMMY object calls EFI Runtime Service, set_variable(), so
+ * it should be invoked only after efi_rts_workqueue is ready.
+ */
+ efi_delete_dummy_variable();
+
/* We register the efi directory at /sys/firmware/efi */
efi_kobj = kobject_create_and_add("efi", firmware_kobj);
if (!efi_kobj) {
diff --git a/include/linux/efi.h b/include/linux/efi.h
index f5083aa72eae..c4efb3ef0dfa 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -992,6 +992,7 @@ extern efi_status_t efi_query_variable_store(u32 attributes,
unsigned long size,
bool nonblocking);
extern void efi_find_mirror(void);
+extern void efi_delete_dummy_variable(void);
#else
static inline void efi_late_init(void) {}
static inline void efi_free_boot_services(void) {}
@@ -1002,6 +1003,8 @@ static inline efi_status_t efi_query_variable_store(u32 attributes,
{
return EFI_SUCCESS;
}
+
+static inline void efi_delete_dummy_variable(void) {}
#endif
extern void __iomem *efi_lookup_mapped_addr(u64 phys_addr);
--
2.1.4
next prev parent reply other threads:[~2018-02-24 22:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-24 22:10 [PATCH V1 0/3] Use efi_rts_workqueue to invoke EFI Runtime Services Sai Praneeth Prakhya
2018-02-24 22:10 ` Sai Praneeth Prakhya [this message]
2018-02-28 0:06 ` [PATCH V1 1/3] x86/efi: Call efi_delete_dummy_variable() during efi subsystem initialization kbuild test robot
2018-02-24 22:10 ` [PATCH V1 2/3] efi: Introduce efi_rts_workqueue and necessary infrastructure to invoke all efi_runtime_services() Sai Praneeth Prakhya
2018-02-25 10:36 ` Miguel Ojeda
2018-02-26 7:37 ` Prakhya, Sai Praneeth
2018-02-24 22:10 ` [PATCH V1 3/3] efi: Use efi_rts_workqueue to invoke EFI Runtime Services Sai Praneeth Prakhya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519510249-31447-2-git-send-email-sai.praneeth.prakhya@intel.com \
--to=sai.praneeth.prakhya@intel.com \
--cc=ard.biesheuvel@linaro.org \
--cc=bhsharma@redhat.com \
--cc=bp@alien8.de \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=jlee@suse.com \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matt@codeblueprint.co.uk \
--cc=peter.zijlstra@intel.com \
--cc=ravi.v.shankar@intel.com \
--cc=ricardo.neri@intel.com \
--cc=tony.luck@intel.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®