From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S967693AbeCAK4F (ORCPT ); Thu, 1 Mar 2018 05:56:05 -0500 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:19130 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S967068AbeCAKyX (ORCPT ); Thu, 1 Mar 2018 05:54:23 -0500 From: To: , , , , , , , CC: , Patrice Chotard Subject: [PATCH v2 4/6] ARM: dts: stm32: Enable sdio1 for stm32f769-disco Date: Thu, 1 Mar 2018 11:53:41 +0100 Message-ID: <1519901623-23216-5-git-send-email-patrice.chotard@st.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1519901623-23216-1-git-send-email-patrice.chotard@st.com> References: <1519901623-23216-1-git-send-email-patrice.chotard@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.75.127.46] X-ClientProxiedBy: SFHDAG7NODE1.st.com (10.75.127.19) To SFHDAG6NODE3.st.com (10.75.127.18) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2018-03-01_06:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Patrice Chotard Adds SDIO related DT nodes for stm32f769-disco board. broken-cd property is needed as it misses a pullup on board (resistor R76 is missing). Signed-off-by: Patrice Chotard --- arch/arm/boot/dts/stm32f769-disco.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 9dba286c6d2f..2d922b5d4766 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -44,6 +44,7 @@ #include "stm32f746.dtsi" #include "stm32f769-pinctrl.dtsi" #include +#include / { model = "STMicroelectronics STM32F769-DISCO board"; @@ -62,6 +63,12 @@ serial0 = &usart1; }; + mmc_vcard: mmc_vcard { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cec { @@ -74,6 +81,18 @@ clock-frequency = <25000000>; }; +&sdio2 { + status = "okay"; + vmmc-supply = <&mmc_vcard>; + cd-gpios = <&gpioi 15 GPIO_ACTIVE_HIGH>; + cd-inverted; + broken-cd; + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdio_pins_b>; + pinctrl-1 = <&sdio_pins_od_b>; + bus-width = <4>; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; -- 1.9.1