From: NeilBrown <neilb@suse.com>
To: Oleg Drokin <oleg.drokin@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
James Simmons <jsimmons@infradead.org>,
Andreas Dilger <andreas.dilger@intel.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Lustre Development List <lustre-devel@lists.lustre.org>
Subject: [PATCH 11/17] staging: lustre: ptlrpc: use workqueue for pinger
Date: Fri, 02 Mar 2018 10:31:25 +1100 [thread overview]
Message-ID: <151994708541.7628.5813099904100247526.stgit@noble> (raw)
In-Reply-To: <151994679573.7628.1024109499321778846.stgit@noble>
lustre has a "Pinger" kthread which periodically pings peers
to ensure all hosts are functioning.
This can more easily be done using a work queue.
As maintaining contact with other peers is import for
keeping the filesystem running, and as the filesystem might
be involved in freeing memory, it is safest to have a
separate WQ_MEM_RECLAIM workqueue.
The SVC_EVENT functionality to wake up the thread can be
replaced with mod_delayed_work().
Also use round_jiffies_up_relative() rather than setting a
minimum of 1 second delay. The PING_INTERVAL is measured in
seconds so this meets the need is allow the workqueue to
keep wakeups synchronized.
Signed-off-by: NeilBrown <neilb@suse.com>
---
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 81 +++++++------------------
1 file changed, 24 insertions(+), 57 deletions(-)
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index b5f3cfee8e75..0775b7a048bb 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -217,21 +217,18 @@ static void ptlrpc_pinger_process_import(struct obd_import *imp,
}
}
-static int ptlrpc_pinger_main(void *arg)
-{
- struct ptlrpc_thread *thread = arg;
-
- /* Record that the thread is running */
- thread_set_flags(thread, SVC_RUNNING);
- wake_up(&thread->t_ctl_waitq);
+static struct workqueue_struct *pinger_wq;
+static void ptlrpc_pinger_main(struct work_struct *ws);
+static DECLARE_DELAYED_WORK(ping_work, ptlrpc_pinger_main);
- /* And now, loop forever, pinging as needed. */
- while (1) {
- unsigned long this_ping = cfs_time_current();
- long time_to_next_wake;
- struct timeout_item *item;
- struct obd_import *imp;
+static void ptlrpc_pinger_main(struct work_struct *ws)
+{
+ unsigned long this_ping = cfs_time_current();
+ long time_to_next_wake;
+ struct timeout_item *item;
+ struct obd_import *imp;
+ do {
mutex_lock(&pinger_mutex);
list_for_each_entry(item, &timeout_list, ti_chain) {
item->ti_cb(item, item->ti_cb_data);
@@ -260,50 +257,24 @@ static int ptlrpc_pinger_main(void *arg)
time_to_next_wake,
cfs_time_add(this_ping,
PING_INTERVAL * HZ));
- if (time_to_next_wake > 0) {
- wait_event_idle_timeout(thread->t_ctl_waitq,
- thread_is_stopping(thread) ||
- thread_is_event(thread),
- max_t(long, time_to_next_wake, HZ));
- if (thread_test_and_clear_flags(thread, SVC_STOPPING))
- break;
- /* woken after adding import to reset timer */
- thread_test_and_clear_flags(thread, SVC_EVENT);
- }
- }
+ } while (time_to_next_wake <= 0);
- thread_set_flags(thread, SVC_STOPPED);
- wake_up(&thread->t_ctl_waitq);
-
- CDEBUG(D_NET, "pinger thread exiting, process %d\n", current_pid());
- return 0;
+ queue_delayed_work(pinger_wq, &ping_work,
+ round_jiffies_up_relative(time_to_next_wake));
}
-static struct ptlrpc_thread pinger_thread;
-
int ptlrpc_start_pinger(void)
{
- struct task_struct *task;
- int rc;
-
- if (!thread_is_init(&pinger_thread) &&
- !thread_is_stopped(&pinger_thread))
+ if (pinger_wq)
return -EALREADY;
- init_waitqueue_head(&pinger_thread.t_ctl_waitq);
-
- strcpy(pinger_thread.t_name, "ll_ping");
-
- task = kthread_run(ptlrpc_pinger_main, &pinger_thread,
- pinger_thread.t_name);
- if (IS_ERR(task)) {
- rc = PTR_ERR(task);
- CERROR("cannot start pinger thread: rc = %d\n", rc);
- return rc;
+ pinger_wq = alloc_workqueue("ptlrpc_pinger", WQ_MEM_RECLAIM, 1);
+ if (!pinger_wq) {
+ CERROR("cannot start pinger workqueue\n");
+ return -ENOMEM;
}
- wait_event_idle(pinger_thread.t_ctl_waitq,
- thread_is_running(&pinger_thread));
+ queue_delayed_work(pinger_wq, &ping_work, 0);
return 0;
}
@@ -313,16 +284,13 @@ int ptlrpc_stop_pinger(void)
{
int rc = 0;
- if (thread_is_init(&pinger_thread) ||
- thread_is_stopped(&pinger_thread))
+ if (!pinger_wq)
return -EALREADY;
ptlrpc_pinger_remove_timeouts();
- thread_set_flags(&pinger_thread, SVC_STOPPING);
- wake_up(&pinger_thread.t_ctl_waitq);
-
- wait_event_idle(pinger_thread.t_ctl_waitq,
- thread_is_stopped(&pinger_thread));
+ cancel_delayed_work_sync(&ping_work);
+ destroy_workqueue(pinger_wq);
+ pinger_wq = NULL;
return rc;
}
@@ -505,6 +473,5 @@ static int ptlrpc_pinger_remove_timeouts(void)
void ptlrpc_pinger_wake_up(void)
{
- thread_add_flags(&pinger_thread, SVC_EVENT);
- wake_up(&pinger_thread.t_ctl_waitq);
+ mod_delayed_work(pinger_wq, &ping_work, 0);
}
next prev parent reply other threads:[~2018-03-01 23:31 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-01 23:31 [PATCH 00/17] staging: remove requirement that lustre be built as module NeilBrown
2018-03-01 23:31 ` [PATCH 13/17] staging: lustre: remove 'ptlrpc_thread usage' for sai_agl_thread NeilBrown
2018-03-09 0:12 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 12/17] staging: lustre: remove unused flag from ptlrpc_thread NeilBrown
2018-03-08 23:54 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 01/17] staging: lustre: obd_mount: use correct niduuid suffix NeilBrown
2018-03-07 20:49 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 06/17] staging: lustre: get entropy from nid when nid set NeilBrown
2018-03-08 0:19 ` Dilger, Andreas
2018-03-01 23:31 ` NeilBrown [this message]
2018-03-08 23:53 ` [PATCH 11/17] staging: lustre: ptlrpc: use workqueue for pinger Dilger, Andreas
2018-03-11 21:37 ` NeilBrown
2018-03-01 23:31 ` [PATCH 05/17] staging: lustre: lnet: keep ln_nportals consistent NeilBrown
2018-03-07 21:24 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 14/17] staging: lustre: change sai_thread to sai_task NeilBrown
2018-03-09 0:20 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 10/17] staging: lustre: ptlrpc: use delayed_work in sec_gc NeilBrown
2018-03-08 19:23 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 03/17] staging: lustre: statahead: remove incorrect test on agl_list_empty() NeilBrown
2018-03-07 21:08 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 08/17] staging: lustre: obdclass: use workqueue for zombie management NeilBrown
2018-03-08 0:27 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 02/17] staging: lustre: fix bug in osc_enter_cache_try NeilBrown
2018-03-07 20:51 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 04/17] staging: lustre: obdclass: don't require lct_owner to be non-NULL NeilBrown
2018-03-07 21:10 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 09/17] staging: lustre: ldlm: use delayed_work for pools_recalc NeilBrown
2018-03-08 19:22 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 07/17] staging: lustre: ptlrpc: change GFP_NOFS to GFP_KERNEL NeilBrown
2018-03-08 0:20 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 16/17] staging: lustre: allow monolithic builds NeilBrown
2018-03-09 0:32 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 17/17] Revert "staging: Disable lustre file system for MIPS, SH, and XTENSA" NeilBrown
2018-03-09 0:37 ` Dilger, Andreas
2018-03-01 23:31 ` [PATCH 15/17] staging: lustre: ptlrpc: move thread creation out of module initialization NeilBrown
2018-03-09 0:31 ` Dilger, Andreas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151994708541.7628.5813099904100247526.stgit@noble \
--to=neilb@suse.com \
--cc=andreas.dilger@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jsimmons@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lustre-devel@lists.lustre.org \
--cc=oleg.drokin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®