Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

[Wolfgang Grandegger <wg@grandegger.com>]

Hello Akshay,

Am 15.03.2017 um 05:44 schrieb Akshay Bhat:
> Hi Wolfgang,
>
> On Tue, Mar 14, 2017 at 2:08 PM, Wolfgang Grandegger <wg@grandegger.com> wrote:
> ...snip....
>>> /////disconnect cable
>>>   can0  20000088   [8]  00 00 00 19 00 00 28 00   ERRORFRAME
>>>         protocol-violation{{}{acknowledge-slot}}
>>>         bus-error
>>>         error-counter-tx-rx{{40}{0}}
>>>   can0  20000088   [8]  00 00 00 19 00 00 58 00   ERRORFRAME
>>>         protocol-violation{{}{acknowledge-slot}}
>>>         bus-error
>>>         error-counter-tx-rx{{88}{0}}
>>>   can0  20000088   [8]  00 00 00 19 00 00 80 00   ERRORFRAME
>>>         protocol-violation{{}{acknowledge-slot}}
>>>         bus-error
>>>         error-counter-tx-rx{{128}{0}}
>>
>>
>> TX error warning is missing.
>>
>
> This support was missing in the driver, added in V4 patch.
>
>>>   can0  2000008C   [8]  00 20 00 19 00 00 80 00   ERRORFRAME
>>>         controller-problem{tx-error-passive}
>>>         protocol-violation{{}{acknowledge-slot}}
>>>         bus-error
>>>         error-counter-tx-rx{{128}{0}}
>>
>>
>> Here "tx-error-passiv" is packed with a bus error. What I'm looking for are
>> state change messages similar to:
>>
>>    can0  20000204  [8] 00 08 00 00 00 00 60 00   ERRORFRAME
>>         controller-problem{tx-error-warning}
>>         state-change{tx-error-warning}
>>         error-counter-tx-rx{{96}{0}}
>>    can0  20000204  [8] 00 30 00 00 00 00 80 00   ERRORFRAME
>>         controller-problem{tx-error-passive}
>>         state-change{tx-error-passive}
>>         error-counter-tx-rx{{128}{0}
>>
>> They should always come, even with "berr-reporting off".
>>
>
> HI-3110 has only 1 bus error interrupt. There is no dedicated state
> change interrupts like other controllers.

To double check: Could you please read INTF, ERR and STATF at the 
beginning of the ISR and print it out (using dev_dbg and fiends). Then 
run a test with no cable connected and bus error reporting off.

Wolfgang.