From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753485AbeCTNOJ (ORCPT ); Tue, 20 Mar 2018 09:14:09 -0400 Received: from szxga04-in.huawei.com ([45.249.212.190]:6657 "EHLO huawei.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753246AbeCTNOF (ORCPT ); Tue, 20 Mar 2018 09:14:05 -0400 From: Wei Yongjun To: Kishon Vijay Abraham I , Maxime Coquelin , Alexandre Torgue , Amelie Delaunay CC: Wei Yongjun , , , Subject: [PATCH -next] phy: stm32: fix using 0 as NULL pointer warnings Date: Tue, 20 Mar 2018 13:19:42 +0000 Message-ID: <1521551982-154471-1-git-send-email-weiyongjun1@huawei.com> X-Mailer: git-send-email 1.8.3.1 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-Originating-IP: [10.175.113.25] X-CFilter-Loop: Reflected Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Fixes the following sparse warnings: drivers/phy/st/phy-stm32-usbphyc.c:331:42: warning: Using plain integer as NULL pointer drivers/phy/st/phy-stm32-usbphyc.c:344:52: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun --- drivers/phy/st/phy-stm32-usbphyc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index bc4e78a..48d4086 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -328,7 +328,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) if (IS_ERR(usbphyc->base)) return PTR_ERR(usbphyc->base); - usbphyc->clk = devm_clk_get(dev, 0); + usbphyc->clk = devm_clk_get(dev, NULL); if (IS_ERR(usbphyc->clk)) { ret = PTR_ERR(usbphyc->clk); dev_err(dev, "clk get failed: %d\n", ret); @@ -341,7 +341,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) return ret; } - usbphyc->rst = devm_reset_control_get(dev, 0); + usbphyc->rst = devm_reset_control_get(dev, NULL); if (!IS_ERR(usbphyc->rst)) { reset_control_assert(usbphyc->rst); udelay(2);