From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-kbuild@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
x86@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, sparclinux@vger.kernel.org,
Sam Ravnborg <sam@ravnborg.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>
Subject: [PATCH v2,10/10] kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
Date: Tue, 27 Mar 2018 00:53:54 +0900 [thread overview]
Message-ID: <1522079634-5947-1-git-send-email-yamada.masahiro@socionext.com> (raw)
GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.
Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped
A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.
.SECONDARY
Prerequisites of this special target are treated as intermediate
files but are never automatically deleted.
.PRECIOUS
When make is interrupted during execution, it may delete the target
file it is updating if the file was modified since make started.
If you mark the file as precious, make will never delete the file
if interrupted.
Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.
The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.
Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.
.PRECIOUS: $(obj)/%.lex.c
works, but
.SECONDARY: $(obj)/%.lex.c
has no effect. However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.
The targets specified as .SECONDARY must be explicit. $(targets)
contains all targets that need to include .*.cmd files. So, the
intermediates you want to keep are mostly in there. Therefore, mark
$(targets) as .SECONDARY. It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.
I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
---
arch/arc/boot/dts/Makefile | 2 --
arch/arm/crypto/Makefile | 2 +-
arch/arm64/crypto/Makefile | 2 +-
arch/metag/boot/dts/Makefile | 2 --
arch/sparc/vdso/Makefile | 4 +---
arch/x86/entry/vdso/Makefile | 4 +---
drivers/of/unittest-data/Makefile | 4 ----
scripts/Makefile.build | 10 +++++++---
scripts/Makefile.lib | 3 ---
9 files changed, 11 insertions(+), 22 deletions(-)
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
index 22a4c5d..a83c4f5 100644
--- a/arch/arc/boot/dts/Makefile
+++ b/arch/arc/boot/dts/Makefile
@@ -9,8 +9,6 @@ endif
obj-y += $(builtindtb-y).dtb.o
dtb-y := $(builtindtb-y).dtb
-.SECONDARY: $(obj)/$(builtindtb-y).dtb.S
-
# for CONFIG_OF_ALL_DTBS test
dtstree := $(srctree)/$(src)
dtb- := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index 30ef8e2..b69ea35 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -63,4 +63,4 @@ $(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl
$(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl
$(call cmd,perl)
-.PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S
+targets += sha256-core.S sha512-core.S
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
index cee9b8d9..036eb23 100644
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -76,4 +76,4 @@ $(src)/sha256-core.S_shipped: $(src)/sha512-armv8.pl
$(src)/sha512-core.S_shipped: $(src)/sha512-armv8.pl
$(call cmd,perlasm)
-.PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S
+targets += sha256-core.S sha512-core.S
diff --git a/arch/metag/boot/dts/Makefile b/arch/metag/boot/dts/Makefile
index f0a180f..16505aa 100644
--- a/arch/metag/boot/dts/Makefile
+++ b/arch/metag/boot/dts/Makefile
@@ -12,5 +12,3 @@ endif
dtb-$(CONFIG_METAG_BUILTIN_DTB) += $(builtindtb-y).dtb
obj-$(CONFIG_METAG_BUILTIN_DTB) += $(builtindtb-y).dtb.o
-
-.SECONDARY: $(obj)/$(builtindtb-y).dtb.S
diff --git a/arch/sparc/vdso/Makefile b/arch/sparc/vdso/Makefile
index a6615d8..dd0b5a9 100644
--- a/arch/sparc/vdso/Makefile
+++ b/arch/sparc/vdso/Makefile
@@ -29,9 +29,7 @@ vdso_img_cfiles := $(vdso_img-y:%=vdso-image-%.c)
vdso_img_sodbg := $(vdso_img-y:%=vdso%.so.dbg)
obj-y += $(vdso_img_objs)
targets += $(vdso_img_cfiles)
-targets += $(vdso_img_sodbg)
-.SECONDARY: $(vdso_img-y:%=$(obj)/vdso-image-%.c) \
- $(vdso_img-y:%=$(obj)/vdso%.so)
+targets += $(vdso_img_sodbg) $(vdso_img-y:%=vdso%.so)
export CPPFLAGS_vdso.lds += -P -C
diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 1943aeb..d998a48 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -42,9 +42,7 @@ vdso_img_cfiles := $(vdso_img-y:%=vdso-image-%.c)
vdso_img_sodbg := $(vdso_img-y:%=vdso%.so.dbg)
obj-y += $(vdso_img_objs)
targets += $(vdso_img_cfiles)
-targets += $(vdso_img_sodbg)
-.SECONDARY: $(vdso_img-y:%=$(obj)/vdso-image-%.c) \
- $(vdso_img-y:%=$(obj)/vdso%.so)
+targets += $(vdso_img_sodbg) $(vdso_img-y:%=vdso%.so)
export CPPFLAGS_vdso.lds += -P -C
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 87a65ca..013d85e 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -30,7 +30,3 @@ DTC_FLAGS_testcases += -@
# suppress warnings about intentional errors
DTC_FLAGS_testcases += -Wno-interrupts_property
-
-.PRECIOUS: \
- $(obj)/%.dtb.S \
- $(obj)/%.dtb
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index ee004f5..67fda60 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -434,8 +434,6 @@ quiet_cmd_asn1_compiler = ASN.1 $@
cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
$(subst .h,.c,$@) $(subst .c,.h,$@)
-.PRECIOUS: $(objtree)/$(obj)/%.asn1.c $(objtree)/$(obj)/%.asn1.h
-
$(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
$(call cmd,asn1_compiler)
@@ -573,10 +571,12 @@ targets := $(filter-out $(PHONY), $(targets))
intermediate_targets = $(foreach sfx, $(2), \
$(patsubst %$(strip $(1)),%$(sfx), \
$(filter %$(strip $(1)), $(targets))))
+# %.asn1.o <- %.asn1.[ch] <- %.asn1
# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
# %.lex.o <- %.lex.c <- %.l
# %.tab.o <- %.tab.[ch] <- %.y
-targets += $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
+targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
+ $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
$(call intermediate_targets, .lex.o, .lex.c) \
$(call intermediate_targets, .tab.o, .tab.c .tab.h)
@@ -616,6 +616,10 @@ $(shell mkdir -p $(obj-dirs))
endif
endif
+# Some files contained in $(targets) are intermediate artifacts.
+# We never want them to be removed automatically.
+.SECONDARY: $(targets)
+
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 2882e19..173d198 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -191,7 +191,6 @@ endef
quiet_cmd_flex = LEX $@
cmd_flex = $(LEX) -o$@ -L $<
-.PRECIOUS: $(obj)/%.lex.c
$(obj)/%.lex.c: $(src)/%.l FORCE
$(call if_changed,flex)
@@ -200,14 +199,12 @@ $(obj)/%.lex.c: $(src)/%.l FORCE
quiet_cmd_bison = YACC $@
cmd_bison = $(YACC) -o$@ -t -l $<
-.PRECIOUS: $(obj)/%.tab.c
$(obj)/%.tab.c: $(src)/%.y FORCE
$(call if_changed,bison)
quiet_cmd_bison_h = YACC $@
cmd_bison_h = bison -o/dev/null --defines=$@ -t -l $<
-.PRECIOUS: $(obj)/%.tab.h
$(obj)/%.tab.h: $(src)/%.y FORCE
$(call if_changed,bison_h)
--
2.7.4
next reply other threads:[~2018-03-26 15:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-26 15:53 Masahiro Yamada [this message]
2018-03-27 6:09 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1522079634-5947-1-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=arnd@arndb.de \
--cc=geert@linux-m68k.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=sparclinux@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®