From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752234AbeC2HvZ (ORCPT ); Thu, 29 Mar 2018 03:51:25 -0400 Received: from relmlor2.renesas.com ([210.160.252.172]:55970 "EHLO relmlie1.idc.renesas.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751086AbeC2HvX (ORCPT ); Thu, 29 Mar 2018 03:51:23 -0400 X-IronPort-AV: E=Sophos;i="5.48,375,1517842800"; d="scan'208";a="276602143" From: Michel Pollet To: linux-renesas-soc@vger.kernel.org, Simon Horman Cc: phil.edworthy@renesas.com, Michel Pollet , Michel Pollet , Magnus Damm , Rob Herring , Mark Rutland , Lee Jones , Russell King , Sebastian Reichel , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org Subject: [PATCH v3 0/8] arm: Base support for Renesas RZN1D-DB Board Date: Thu, 29 Mar 2018 08:46:56 +0100 Message-Id: <1522309629-10152-1-git-send-email-michel.pollet@bp.renesas.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This series adds the plain basic support for booting a bare kernel on the RZ/N1D-DB Board. It's been trimmed to the strict minimum as a 'base', further patches that will add the rest of the support, pinctrl, clock architecture and quite a few others. Thanks for the comments on the previous version! v3: + Fixes for suggestions by Geert Uytterhoeven + Removed SoC Specific renesas,r9a06g032-xxx, as it's not needed for now. + Kept renesas,rzn1 as a family/generic for this family. + Fixed a couple of the commit messages. + Added Geert's Reviewed-By where appropriate. v2: + Fixes for suggestions by Simon Horman + Fixes for suggestions by Rob Herring + Fixes for suggestions by Geert Uytterhoeven + Removed the mach file + Added a MFD base for the sysctrl block + Added a regmap based sub driver for the reboot handler + Renamed the files to match shmobile conventions + Adapted the compatible= strings to reflect 'family' vs 'part' distinction. + Removed the sysctrl.h file entirelly. + Fixed every warnings from the DTC compiler on W=12 mode. + Split the device-tree patches from the code. Michel Pollet (8): DT: mfd: renesas,rzn1-sysctrl: document RZ/N1 sysctrl node DT: reset: renesas,rzn1-reboot: document RZ/N1 reboot driver DT: arm: renesas,rzn1: add the RZ/N1 SoC and RZN1D-DB board reset: Renesas RZ/N1 reboot driver arm: shmobile: Add the RZ/N1 arch to the shmobile Kconfig DT: arm: Add Renesas RZ/N1 SoC base device tree file DT: arm: Add Renesas RZN1D-DB Board base file DT: arm: Add the RZN1D-DB Board to Renesas Makefile target Documentation/devicetree/bindings/arm/shmobile.txt | 7 +- .../bindings/mfd/renesas,rzn1-sysctrl.txt | 19 ++++ .../bindings/power/renesas,rzn1-reboot.txt | 20 ++++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 26 +++++ arch/arm/boot/dts/r9a06g0xx.dtsi | 96 +++++++++++++++++++ arch/arm/mach-shmobile/Kconfig | 5 + drivers/power/reset/Kconfig | 7 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/rzn1-reboot.c | 105 +++++++++++++++++++++ 10 files changed, 286 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/mfd/renesas,rzn1-sysctrl.txt create mode 100644 Documentation/devicetree/bindings/power/renesas,rzn1-reboot.txt create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts create mode 100644 arch/arm/boot/dts/r9a06g0xx.dtsi create mode 100644 drivers/power/reset/rzn1-reboot.c -- 2.7.4