mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Amelie Delaunay <amelie.delaunay@st.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Amelie Delaunay <amelie.delaunay@st.com>
Subject: [PATCH 2/3] ARM: dts: stm32: add SPI1 support on stm32mp157c-ev1
Date: Thu, 17 May 2018 16:21:43 +0200	[thread overview]
Message-ID: <1526566904-24514-3-git-send-email-amelie.delaunay@st.com> (raw)
In-Reply-To: <1526566904-24514-1-git-send-email-amelie.delaunay@st.com>

This patch adds SPI1 support on stm32mp157c-ev1 board.
SPI1 is available on GPIO expansion connector but kept disabled
so these pins can be used as GPIOs by default.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 16 +++++++++++++++-
 arch/arm/boot/dts/stm32mp157c-ev1.dts     |  6 ++++++
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 88e9133..b35f151 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -277,7 +277,6 @@
 			compatible = "st,stm32mp157-z-pinctrl";
 			ranges = <0 0x54004000 0x400>;
 			pins-are-numbered;
-			status = "disabled";
 
 			gpioz: gpio@54004000 {
 				gpio-controller;
@@ -301,6 +300,21 @@
 					slew-rate = <0>;
 				};
 			};
+
+			spi1_pins_a: spi1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+						 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+					bias-disable;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 9382d80..7584e1f 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -67,6 +67,12 @@
 	};
 };
 
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "disabled";
+};
+
 &timers2 {
 	status = "disabled";
 	pwm {
-- 
2.7.4

  parent reply	other threads:[~2018-05-17 14:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-17 14:21 [PATCH 0/3] Add STM32 SPI support on stm32mp157c Amelie Delaunay
2018-05-17 14:21 ` [PATCH 1/3] ARM: dts: stm32: add " Amelie Delaunay
2018-05-17 14:21 ` Amelie Delaunay [this message]
2018-05-17 14:21 ` [PATCH 3/3] ARM: multi_v7_defconfig: enable STM32 SPI Amelie Delaunay
2018-06-26  8:44   ` Alexandre Torgue
2018-06-26 11:47     ` Amelie DELAUNAY
2018-06-26 12:13       ` Alexandre Torgue
2018-06-26 13:01 ` [PATCH 0/3] Add STM32 SPI support on stm32mp157c Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526566904-24514-3-git-send-email-amelie.delaunay@st.com \
    --to=amelie.delaunay@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®