From: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
To: linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Sai Praneeth <sai.praneeth.prakhya@intel.com>,
Lee Chun-Yi <jlee@suse.com>, Borislav Petkov <bp@alien8.de>,
Tony Luck <tony.luck@intel.com>,
Will Deacon <will.deacon@arm.com>,
Dave Hansen <dave.hansen@intel.com>,
Mark Rutland <mark.rutland@arm.com>,
Bhupesh Sharma <bhsharma@redhat.com>,
Naresh Bhat <naresh.bhat@linaro.org>,
Ricardo Neri <ricardo.neri@intel.com>,
Peter Zijlstra <peterz@infradead.org>,
Ravi Shankar <ravi.v.shankar@intel.com>,
Matt Fleming <matt@codeblueprint.co.uk>,
Dan Williams <dan.j.williams@intel.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Subject: [PATCH V4 1/3] x86/efi: Call efi_delete_dummy_variable() during efi subsystem initialization
Date: Fri, 25 May 2018 15:05:01 -0700 [thread overview]
Message-ID: <1527285903-31799-2-git-send-email-sai.praneeth.prakhya@intel.com> (raw)
In-Reply-To: <1527285903-31799-1-git-send-email-sai.praneeth.prakhya@intel.com>
From: Sai Praneeth <sai.praneeth.prakhya@intel.com>
Invoking efi_runtime_services() through efi_rts_wq (efi runtime
services workqueue) means all accesses to efi_runtime_services() should
be done after efi_rts_wq has been created. efi_delete_dummy_variable()
calls set_variable(), hence efi_delete_dummy_variable() should be called
after efi_rts_wq has been created.
Presently, efi_delete_dummy_variable() is called from
efi_enter_virtual_mode() which is early in the boot phase (efi_rts_wq
isn't created yet), so call efi_delete_dummy_variable() later in the
boot phase. Another and the most important reason for calling
efi_delete_dummy_variable() late in the boot process is, if called
before rest_init(), kernel prints stack trace with a warning "bad:
scheduling from the idle thread!". Hence, call from efisubsys_init()
which is called during rest_init().
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Cc: Lee Chun-Yi <jlee@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Naresh Bhat <naresh.bhat@linaro.org>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
---
arch/x86/include/asm/efi.h | 1 -
arch/x86/platform/efi/efi.c | 6 ------
drivers/firmware/efi/efi.c | 6 ++++++
include/linux/efi.h | 3 +++
4 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index cec5fae23eb3..0e61b771b93d 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -138,7 +138,6 @@ extern void __init efi_runtime_update_mappings(void);
extern void __init efi_dump_pagetable(void);
extern void __init efi_apply_memmap_quirks(void);
extern int __init efi_reuse_config(u64 tables, int nr_tables);
-extern void efi_delete_dummy_variable(void);
extern void efi_switch_mm(struct mm_struct *mm);
struct efi_setup_data {
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 9061babfbc83..a3169d14583f 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -893,9 +893,6 @@ static void __init kexec_enter_virtual_mode(void)
if (efi_enabled(EFI_OLD_MEMMAP) && (__supported_pte_mask & _PAGE_NX))
runtime_code_page_mkexec();
-
- /* clean DUMMY object */
- efi_delete_dummy_variable();
#endif
}
@@ -1015,9 +1012,6 @@ static void __init __efi_enter_virtual_mode(void)
* necessary relocation fixups for the new virtual addresses.
*/
efi_runtime_update_mappings();
-
- /* clean DUMMY object */
- efi_delete_dummy_variable();
}
void __init efi_enter_virtual_mode(void)
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 232f4915223b..1176af664013 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -337,6 +337,12 @@ static int __init efisubsys_init(void)
if (!efi_enabled(EFI_BOOT))
return 0;
+ /*
+ * Clean DUMMY object calls EFI Runtime Service, set_variable(), so
+ * it should be invoked only after efi_rts_wq is ready.
+ */
+ efi_delete_dummy_variable();
+
/* We register the efi directory at /sys/firmware/efi */
efi_kobj = kobject_create_and_add("efi", firmware_kobj);
if (!efi_kobj) {
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 3016d8c456bc..1b79939d0b1e 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -994,6 +994,7 @@ extern efi_status_t efi_query_variable_store(u32 attributes,
unsigned long size,
bool nonblocking);
extern void efi_find_mirror(void);
+extern void efi_delete_dummy_variable(void);
#else
static inline void efi_late_init(void) {}
static inline void efi_free_boot_services(void) {}
@@ -1004,6 +1005,8 @@ static inline efi_status_t efi_query_variable_store(u32 attributes,
{
return EFI_SUCCESS;
}
+
+static inline void efi_delete_dummy_variable(void) {}
#endif
extern void __iomem *efi_lookup_mapped_addr(u64 phys_addr);
--
2.7.4
next prev parent reply other threads:[~2018-05-25 22:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 22:05 [PATCH V4 0/3] Use efi_rts_wq to invoke EFI Runtime Services Sai Praneeth Prakhya
2018-05-25 22:05 ` Sai Praneeth Prakhya [this message]
2018-05-25 22:05 ` [PATCH V4 2/3] efi: Create efi_rts_wq and efi_queue_work() to invoke all efi_runtime_services() Sai Praneeth Prakhya
2018-05-25 22:05 ` [PATCH V4 3/3] efi: Use efi_rts_wq to invoke EFI Runtime Services Sai Praneeth Prakhya
2018-05-25 22:19 ` [PATCH V4 0/3] " Ard Biesheuvel
2018-05-25 23:08 ` Prakhya, Sai Praneeth
2018-05-26 6:32 ` Ard Biesheuvel
2018-05-27 5:32 ` Prakhya, Sai Praneeth
2018-05-27 8:19 ` Ard Biesheuvel
2018-05-27 8:37 ` Prakhya, Sai Praneeth
2018-05-27 12:28 ` Ard Biesheuvel
2018-05-27 15:47 ` Prakhya, Sai Praneeth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527285903-31799-2-git-send-email-sai.praneeth.prakhya@intel.com \
--to=sai.praneeth.prakhya@intel.com \
--cc=ard.biesheuvel@linaro.org \
--cc=bhsharma@redhat.com \
--cc=bp@alien8.de \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=jlee@suse.com \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matt@codeblueprint.co.uk \
--cc=miguel.ojeda.sandonis@gmail.com \
--cc=naresh.bhat@linaro.org \
--cc=peterz@infradead.org \
--cc=ravi.v.shankar@intel.com \
--cc=ricardo.neri@intel.com \
--cc=tony.luck@intel.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®