From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1031080AbeEZDKy (ORCPT ); Fri, 25 May 2018 23:10:54 -0400 Received: from mail-pl0-f68.google.com ([209.85.160.68]:38928 "EHLO mail-pl0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030929AbeEZDKx (ORCPT ); Fri, 25 May 2018 23:10:53 -0400 X-Google-Smtp-Source: AB8JxZrEIX1lMB8bSg1ALijagaS4ZavQSfyFPBmi9j87lIL+YdJGd0c+DSqxP2avlYpfnehUbx02Tg== From: John Stultz To: lkml Cc: John Stultz , Ryan Grachek , Wei Xu , Arnd Bergmann , Ulf Hansson , YongQin Liu , Leo Yan Subject: [PATCH] arm64: dts: hikey: Fix eMMC corruption regression Date: Fri, 25 May 2018 20:10:47 -0700 Message-Id: <1527304247-12868-1-git-send-email-john.stultz@linaro.org> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch is a partial revert of commit abd7d0972a19 ("arm64: dts: hikey: Enable HS200 mode on eMMC") which has been causing eMMC corruption on my HiKey board. Symptoms usually looked like: mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) ... mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc0: new HS200 MMC card at address 0001 ... dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3 mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) print_req_error: I/O error, dev mmcblk0, sector 8810504 Aborting journal on device mmcblk0p10-8. mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) EXT4-fs error (device mmcblk0p10): ext4_journal_check_start:61: Detected aborted journal EXT4-fs (mmcblk0p10): Remounting filesystem read-only And quite often this would result in a disk that wouldn't properly boot even with older kernels. It seems the max-frequency property added by the above patch is causing the problem, so remove it. Cc: Ryan Grachek Cc: Wei Xu Cc: Arnd Bergmann Cc: Ulf Hansson Cc: YongQin Liu Cc: Leo Yan Signed-off-by: John Stultz --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 724a0d3..edb4ee0 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -299,7 +299,6 @@ /* GPIO blocks 16 thru 19 do not appear to be routed to pins */ dwmmc_0: dwmmc0@f723d000 { - max-frequency = <150000000>; cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; -- 2.7.4