mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Akshu Agrawal <akshu.agrawal@amd.com>
To: unlisted-recipients:; (no To-header on input)
Cc: djkurtz@chromium.org, akshu.agrawal@amd.com,
	Alexander.Deucher@amd.com, Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	"Mukunda, Vijendar" <Vijendar.Mukunda@amd.com>,
	Alex Deucher <alexander.deucher@amd.com>,
	Guenter Roeck <linux@roeck-us.net>,
	alsa-devel@alsa-project.org (moderated list:SOUND - SOC LAYER /
	DYNAMIC AUDIO POWER MANAGEM...),
	linux-kernel@vger.kernel.org (open list)
Subject: [v2] ASoC: AMD: make channel 1 dma as circular
Date: Mon, 28 May 2018 11:48:22 +0800	[thread overview]
Message-ID: <1527479306-12658-1-git-send-email-akshu.agrawal@amd.com> (raw)

channel 1: SYSMEM<->ACP
channel 2: ACP<->I2S
Instead of waiting on period interrupt of ch 2 and then starting
dma on ch1, we make ch1 dma as circular.
This removes dependency of period granularity on hw pointer.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
---
v2: Fixed kbuild error

 sound/soc/amd/acp-pcm-dma.c | 74 ++++++---------------------------------------
 1 file changed, 10 insertions(+), 64 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index ac32dea..7720384 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -337,8 +337,7 @@ static void config_acp_dma(void __iomem *acp_mmio,
 }
 
 /* Start a given DMA channel transfer */
-static void acp_dma_start(void __iomem *acp_mmio,
-			  u16 ch_num, bool is_circular)
+static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num)
 {
 	u32 dma_ctrl;
 
@@ -369,11 +368,8 @@ static void acp_dma_start(void __iomem *acp_mmio,
 		break;
 	}
 
-	/* enable  for ACP SRAM to/from I2S DMA channel */
-	if (is_circular == true)
-		dma_ctrl |= ACP_DMA_CNTL_0__Circular_DMA_En_MASK;
-	else
-		dma_ctrl &= ~ACP_DMA_CNTL_0__Circular_DMA_En_MASK;
+	/* circular for both DMA channel */
+	dma_ctrl |= ACP_DMA_CNTL_0__Circular_DMA_En_MASK;
 
 	acp_reg_write(dma_ctrl, acp_mmio, mmACP_DMA_CNTL_0 + ch_num);
 }
@@ -617,7 +613,6 @@ static int acp_deinit(void __iomem *acp_mmio)
 /* ACP DMA irq handler routine for playback, capture usecases */
 static irqreturn_t dma_irq_handler(int irq, void *arg)
 {
-	u16 dscr_idx;
 	u32 intr_flag, ext_intr_status;
 	struct audio_drv_data *irq_data;
 	void __iomem *acp_mmio;
@@ -634,33 +629,13 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 
 	if ((intr_flag & BIT(ACP_TO_I2S_DMA_CH_NUM)) != 0) {
 		valid_irq = true;
-		if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_13) ==
-				PLAYBACK_START_DMA_DESCR_CH13)
-			dscr_idx = PLAYBACK_END_DMA_DESCR_CH12;
-		else
-			dscr_idx = PLAYBACK_START_DMA_DESCR_CH12;
-		config_acp_dma_channel(acp_mmio, SYSRAM_TO_ACP_CH_NUM, dscr_idx,
-				       1, 0);
-		acp_dma_start(acp_mmio, SYSRAM_TO_ACP_CH_NUM, false);
-
 		snd_pcm_period_elapsed(irq_data->play_i2ssp_stream);
-
 		acp_reg_write((intr_flag & BIT(ACP_TO_I2S_DMA_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
 	if ((intr_flag & BIT(ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
-		if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_9) ==
-			PLAYBACK_START_DMA_DESCR_CH9)
-			dscr_idx = PLAYBACK_END_DMA_DESCR_CH8;
-		else
-			dscr_idx = PLAYBACK_START_DMA_DESCR_CH8;
-		config_acp_dma_channel(acp_mmio,
-				       SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM,
-				       dscr_idx, 1, 0);
-		acp_dma_start(acp_mmio, SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM,
-			      false);
 		snd_pcm_period_elapsed(irq_data->play_i2sbt_stream);
 		acp_reg_write((intr_flag &
 			      BIT(ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM)) << 16,
@@ -669,38 +644,20 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 
 	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
 		valid_irq = true;
-		if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_15) ==
-				CAPTURE_START_DMA_DESCR_CH15)
-			dscr_idx = CAPTURE_END_DMA_DESCR_CH14;
-		else
-			dscr_idx = CAPTURE_START_DMA_DESCR_CH14;
-		config_acp_dma_channel(acp_mmio, ACP_TO_SYSRAM_CH_NUM, dscr_idx,
-				       1, 0);
-		acp_dma_start(acp_mmio, ACP_TO_SYSRAM_CH_NUM, false);
-
+		snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream);
 		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
 	if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) {
 		valid_irq = true;
-		snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream);
 		acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
 	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
-		if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_11) ==
-			CAPTURE_START_DMA_DESCR_CH11)
-			dscr_idx = CAPTURE_END_DMA_DESCR_CH10;
-		else
-			dscr_idx = CAPTURE_START_DMA_DESCR_CH10;
-		config_acp_dma_channel(acp_mmio,
-				       ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM,
-				       dscr_idx, 1, 0);
-		acp_dma_start(acp_mmio, ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM,
-			      false);
+		snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream);
 		acp_reg_write((intr_flag &
 			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
@@ -708,7 +665,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 
 	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
-		snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream);
 		acp_reg_write((intr_flag &
 			      BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
@@ -1015,14 +971,10 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream)
 static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 {
 	int ret;
-	u32 loops = 4000;
 	u64 bytescount = 0;
 
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct snd_soc_pcm_runtime *prtd = substream->private_data;
 	struct audio_substream_data *rtd = runtime->private_data;
-	struct snd_soc_component *component = snd_soc_rtdcom_lookup(prtd,
-								    DRV_NAME);
 
 	if (!rtd)
 		return -EINVAL;
@@ -1034,18 +986,12 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 		if (rtd->bytescount == 0)
 			rtd->bytescount = bytescount;
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			acp_dma_start(rtd->acp_mmio, rtd->ch1, false);
-			while (acp_reg_read(rtd->acp_mmio, mmACP_DMA_CH_STS) &
-				BIT(rtd->ch1)) {
-				if (!loops--) {
-					dev_err(component->dev,
-						"acp dma start timeout\n");
-					return -ETIMEDOUT;
-				}
-				cpu_relax();
-			}
+			acp_dma_start(rtd->acp_mmio, rtd->ch1);
+			acp_dma_start(rtd->acp_mmio, rtd->ch2);
+		} else {
+			acp_dma_start(rtd->acp_mmio, rtd->ch2);
+			acp_dma_start(rtd->acp_mmio, rtd->ch1);
 		}
-		acp_dma_start(rtd->acp_mmio, rtd->ch2, true);
 		ret = 0;
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
-- 
1.9.1

             reply	other threads:[~2018-05-28  3:49 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-28  3:48 Akshu Agrawal [this message]
2018-05-29 14:59 ` Applied "ASoC: AMD: make channel 1 dma as circular" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527479306-12658-1-git-send-email-akshu.agrawal@amd.com \
    --to=akshu.agrawal@amd.com \
    --cc=Alexander.Deucher@amd.com \
    --cc=Vijendar.Mukunda@amd.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=djkurtz@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®