From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>, <linuxarm@huawei.com>,
<linux-kernel@vger.kernel.org>,
Xiaofei Tan <tanxiaofei@huawei.com>,
"John Garry" <john.garry@huawei.com>
Subject: [PATCH 5/9] scsi: hisi_sas: Add a flag to filter PHY events during reset
Date: Thu, 31 May 2018 20:50:46 +0800 [thread overview]
Message-ID: <1527771050-200916-6-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1527771050-200916-1-git-send-email-john.garry@huawei.com>
From: Xiaofei Tan <tanxiaofei@huawei.com>
During reset, we don't want PHY events reported to libsas for PHYs which
were previously attached prior to reset.
So check hisi_hba->flags for HISI_SAS_RESET_BIT to filter PHY events
during reset.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 3 ++-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 3 ++-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 3 ++-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 ++-
4 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 090d3e0..006e776 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1927,7 +1927,8 @@ void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
} else {
struct hisi_sas_port *port = phy->port;
- if (phy->in_reset) {
+ if (test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags) ||
+ phy->in_reset) {
dev_info(dev, "ignore flutter phy%d down\n", phy_no);
return;
}
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 89ab18c..3277442 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1469,7 +1469,8 @@ static irqreturn_t int_bcast_v1_hw(int irq, void *p)
goto end;
}
- sha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ if (!test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
+ sha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
end:
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 213c530..159576e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2840,7 +2840,8 @@ static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
bcast_status = hisi_sas_phy_read32(hisi_hba, phy_no, RX_PRIMS_STATUS);
- if (bcast_status & RX_BCAST_CHG_MSK)
+ if ((bcast_status & RX_BCAST_CHG_MSK) &&
+ !test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
CHL_INT0_SL_RX_BCST_ACK_MSK);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index c40fdb8..e43881d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1263,7 +1263,8 @@ static irqreturn_t phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
bcast_status = hisi_sas_phy_read32(hisi_hba, phy_no, RX_PRIMS_STATUS);
- if (bcast_status & RX_BCAST_CHG_MSK)
+ if ((bcast_status & RX_BCAST_CHG_MSK) &&
+ !test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
CHL_INT0_SL_RX_BCST_ACK_MSK);
--
1.9.1
next prev parent reply other threads:[~2018-05-31 12:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-31 12:50 [PATCH 0/9] hisi_sas: some misc changes John Garry
2018-05-31 12:50 ` [PATCH 1/9] scsi: hisi_sas: Use dmam_alloc_coherent() John Garry
2018-05-31 12:50 ` [PATCH 2/9] scsi: hisi_sas: Only process broadcast change in phy_bcast_v3_hw() John Garry
2018-05-31 12:50 ` [PATCH 3/9] scsi: hisi_sas: Fix the conflict between dev gone and host reset John Garry
2018-05-31 12:50 ` [PATCH 4/9] scsi: hisi_sas: Adjust task reject period during " John Garry
2018-05-31 12:50 ` John Garry [this message]
2018-05-31 12:50 ` [PATCH 6/9] scsi: hisi_sas: Release all remaining resources in clear nexus ha John Garry
2018-05-31 12:50 ` [PATCH 7/9] scsi: hisi_sas: Pre-allocate slot DMA buffers John Garry
2018-05-31 12:50 ` [PATCH 8/9] scsi: hisi_sas: Add missing PHY spinlock init John Garry
2018-05-31 12:50 ` [PATCH 9/9] scsi: hisi_sas: Update a couple of register settings for v3 hw John Garry
2018-06-08 1:42 ` [PATCH 0/9] hisi_sas: some misc changes Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527771050-200916-6-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
--cc=tanxiaofei@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®