From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751824AbeFEIw3 (ORCPT ); Tue, 5 Jun 2018 04:52:29 -0400 Received: from mail-wm0-f67.google.com ([74.125.82.67]:55319 "EHLO mail-wm0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751661AbeFEIw1 (ORCPT ); Tue, 5 Jun 2018 04:52:27 -0400 X-Google-Smtp-Source: ADUXVKK7NLkEceoyt0CG4NLimeFA6NdpeCyLf2xK7PpfZt0zfzBSIZM27DcmKEUSuWAjXtawXDrSXg== From: Neil Armstrong To: khilman@baylibre.com Cc: Neil Armstrong , linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0 Date: Tue, 5 Jun 2018 10:52:23 +0200 Message-Id: <1528188743-12798-1-git-send-email-narmstrong@baylibre.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Like LibreTech-CC, the USB0 needs the 5V regulator to be enabled to power the devices on the P212 Reference Design based boards. Fixes: b9f07cb4f41f ("ARM64: dts: meson-gxl-s905x-p212: enable the USB controller") Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 0cfd701..a1b3101 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -189,3 +189,10 @@ &usb0 { status = "okay"; }; + +&usb2_phy0 { + /* + * HDMI_5V is also used as supply for the USB VBUS. + */ + phy-supply = <&hdmi_5v>; +}; -- 2.7.4