From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751828AbeFEKGe (ORCPT ); Tue, 5 Jun 2018 06:06:34 -0400 Received: from lelnx194.ext.ti.com ([198.47.27.80]:47769 "EHLO lelnx194.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751792AbeFEKGd (ORCPT ); Tue, 5 Jun 2018 06:06:33 -0400 From: Keerthy To: CC: , , , , , Subject: [PATCH] ARM: davinci: da850: Fix interrups property for gpio Date: Tue, 5 Jun 2018 15:35:52 +0530 Message-ID: <1528193152-10657-1-git-send-email-j-keerthy@ti.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The intc #interrupt-cells is equal to 1. Currently gpio node has 2 cells per IRQ which is wrong. Remove the additional cell for each of the interrupts. Signed-off-by: Keerthy Fixes: 2e38b946dc54 ("ARM: davinci: da850: add GPIO DT node") --- arch/arm/boot/dts/da850.dtsi | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index f6f1597..0f4f817 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -549,11 +549,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x226000 0x1000>; - interrupts = <42 IRQ_TYPE_EDGE_BOTH - 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH - 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH - 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH - 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>; + interrupts = <42 43 44 45 46 47 48 49 50>; ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; status = "disabled"; -- 1.9.1