Re: HPT374 RAID bus controller SATA, only UDMA 33

["Lukas Postupa" <postupa@gmx.de>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 1020 bytes --]

On Thu, 15 Dec 2005 12:31:55 +0000, Alan Cox wrote:


> > my SAMSUNG 250GB drive connected to HPT374 RAID bus > > controller
(SATA) is only working at UDMA 33.
> 
> 
> Force ata66 support on. See Documentation/ide.txt
> 

I tried to force ata66 but this doesn't work.
Drive still remains at UDMA 33.

But setting CONFIG_IDEDMA_PCI_AUTO to [ n ] (kernel 2.6.14.4) skips UDMA 33
detection and leads to this output:

hdk: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 /*
before:  ,UDMA(33) */

Then after booting:

$hdparm -d 1 /dev/hdk

/dev/hdk:
 setting using_dma to 1 (on)
 using_dma    =  1 (on)

$hdparm -t /dev/hdk

/dev/hdk:
 Timing buffered disk reads:  162 MB in  3.02 seconds =  53.71 MB/sec

now this looks much better :)

By the way: Is there a trick setting DMA without CONFIG_IDEDMA_PCI_AUTO = [
y ] at boot time independent from init scripts?

regards,

Lukas

-- 
DSL-Aktion wegen großer Nachfrage bis 28.2.2006 verlängert:
GMX DSL-Flatrate 1 Jahr kostenlos* http://www.gmx.net/de/go/dsl