From: Todor Tomov <todor.tomov@linaro.org>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
hans.verkuil@cisco.com,
laurent.pinchart+renesas@ideasonboard.com,
linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Todor Tomov <todor.tomov@linaro.org>
Subject: [PATCH 00/32] Qualcomm Camera Subsystem driver - 8x96 support
Date: Fri, 22 Jun 2018 18:33:09 +0300 [thread overview]
Message-ID: <1529681621-9682-1-git-send-email-todor.tomov@linaro.org> (raw)
This patchset adds support for the Qualcomm Camera Subsystem found
on Qualcomm MSM8996 and APQ8096 SoC to the existing driver which
used to support MSM8916 and APQ8016.
The camera subsystem hardware on 8x96 is similar to 8x16 but
supports more cameras and features. More details are added in the
driver document by the last patch.
The first 3 patches are dependencies which have already been on
the mainling list but I'm adding them here for completeness.
The following 11 patches add general updates and fixes to the driver.
Then the rest add the support for the new hardware.
The driver is tested on Dragonboard 410c (APQ8016) and Dragonboard 820c
(APQ8096) with OV5645 camera sensors. media-ctl [1], yavta [2] and
GStreamer were used for testing.
[1] https://git.linuxtv.org//v4l-utils.git
[2] http://git.ideasonboard.org/yavta.git
Sakari Ailus (1):
doc-rst: Add packed Bayer raw14 pixel formats
Todor Tomov (31):
media: v4l: Add new 2X8 10-bit grayscale media bus code
media: v4l: Add new 10-bit packed grayscale format
media: Rename CAMSS driver path
media: camss: Use SPDX license headers
media: camss: Fix OF node usage
media: camss: csiphy: Ensure clock mux config is done before the rest
media: camss: Unify the clock names
media: camss: csiphy: Update settle count calculation
media: camss: csid: Configure data type and decode format properly
media: camss: vfe: Fix to_vfe() macro member name
media: camss: vfe: Get line pointer as container of video_out
media: camss: vfe: Do not disable CAMIF when clearing its status
media: dt-bindings: media: qcom,camss: Fix whitespaces
media: dt-bindings: media: qcom,camss: Add 8996 bindings
media: camss: Add 8x96 resources
media: camss: Add basic runtime PM support
media: camss: csiphy: Split to hardware dependent and independent
parts
media: camss: csiphy: Unify lane handling
media: camss: csiphy: Add support for 8x96
media: camss: csid: Add support for 8x96
media: camss: ispif: Add support for 8x96
media: camss: vfe: Split to hardware dependent and independent parts
media: camss: vfe: Add support for 8x96
media: camss: Format configuration per hardware version
media: camss: vfe: Different format support on source pad
media: camss: vfe: Add support for UYVY output from VFE on 8x96
media: camss: csid: Different format support on source pad
media: camss: csid: MIPI10 to Plain16 format conversion
media: camss: Add support for RAW MIPI14 on 8x96
media: camss: Add support for 10-bit grayscale formats
media: doc: media/v4l-drivers: Update Qualcomm CAMSS driver document
for 8x96
.../devicetree/bindings/media/qcom,camss.txt | 128 +-
Documentation/media/uapi/v4l/pixfmt-rgb.rst | 1 +
Documentation/media/uapi/v4l/pixfmt-srggb14p.rst | 127 +
Documentation/media/uapi/v4l/pixfmt-y10p.rst | 33 +
Documentation/media/uapi/v4l/subdev-formats.rst | 72 +
Documentation/media/uapi/v4l/yuv-formats.rst | 1 +
Documentation/media/v4l-drivers/qcom_camss.rst | 93 +-
.../media/v4l-drivers/qcom_camss_8x96_graph.dot | 104 +
MAINTAINERS | 2 +-
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/Makefile | 2 +-
drivers/media/platform/qcom/camss-8x16/Makefile | 11 -
.../media/platform/qcom/camss-8x16/camss-csid.c | 1094 -------
.../media/platform/qcom/camss-8x16/camss-csid.h | 82 -
.../media/platform/qcom/camss-8x16/camss-csiphy.c | 893 ------
.../media/platform/qcom/camss-8x16/camss-csiphy.h | 77 -
.../media/platform/qcom/camss-8x16/camss-ispif.c | 1178 --------
.../media/platform/qcom/camss-8x16/camss-ispif.h | 85 -
drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 3093 --------------------
drivers/media/platform/qcom/camss-8x16/camss-vfe.h | 123 -
.../media/platform/qcom/camss-8x16/camss-video.c | 859 ------
.../media/platform/qcom/camss-8x16/camss-video.h | 70 -
drivers/media/platform/qcom/camss-8x16/camss.c | 751 -----
drivers/media/platform/qcom/camss-8x16/camss.h | 106 -
drivers/media/platform/qcom/camss/Makefile | 15 +
drivers/media/platform/qcom/camss/camss-csid.c | 1376 +++++++++
drivers/media/platform/qcom/camss/camss-csid.h | 77 +
.../platform/qcom/camss/camss-csiphy-2ph-1-0.c | 177 ++
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 256 ++
drivers/media/platform/qcom/camss/camss-csiphy.c | 761 +++++
drivers/media/platform/qcom/camss/camss-csiphy.h | 89 +
drivers/media/platform/qcom/camss/camss-ispif.c | 1367 +++++++++
drivers/media/platform/qcom/camss/camss-ispif.h | 78 +
drivers/media/platform/qcom/camss/camss-vfe-4-1.c | 1018 +++++++
drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 1140 ++++++++
drivers/media/platform/qcom/camss/camss-vfe.c | 2341 +++++++++++++++
drivers/media/platform/qcom/camss/camss-vfe.h | 183 ++
drivers/media/platform/qcom/camss/camss-video.c | 958 ++++++
drivers/media/platform/qcom/camss/camss-video.h | 62 +
drivers/media/platform/qcom/camss/camss.c | 1027 +++++++
drivers/media/platform/qcom/camss/camss.h | 115 +
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
include/uapi/linux/media-bus-format.h | 3 +-
include/uapi/linux/videodev2.h | 6 +
44 files changed, 11530 insertions(+), 8507 deletions(-)
create mode 100644 Documentation/media/uapi/v4l/pixfmt-srggb14p.rst
create mode 100644 Documentation/media/uapi/v4l/pixfmt-y10p.rst
create mode 100644 Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot
delete mode 100644 drivers/media/platform/qcom/camss-8x16/Makefile
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csid.c
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csid.h
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csiphy.c
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csiphy.h
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-ispif.c
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-ispif.h
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-vfe.c
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-vfe.h
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-video.c
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-video.h
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss.c
delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss.h
create mode 100644 drivers/media/platform/qcom/camss/Makefile
create mode 100644 drivers/media/platform/qcom/camss/camss-csid.c
create mode 100644 drivers/media/platform/qcom/camss/camss-csid.h
create mode 100644 drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c
create mode 100644 drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
create mode 100644 drivers/media/platform/qcom/camss/camss-csiphy.c
create mode 100644 drivers/media/platform/qcom/camss/camss-csiphy.h
create mode 100644 drivers/media/platform/qcom/camss/camss-ispif.c
create mode 100644 drivers/media/platform/qcom/camss/camss-ispif.h
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-4-1.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-4-7.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe.h
create mode 100644 drivers/media/platform/qcom/camss/camss-video.c
create mode 100644 drivers/media/platform/qcom/camss/camss-video.h
create mode 100644 drivers/media/platform/qcom/camss/camss.c
create mode 100644 drivers/media/platform/qcom/camss/camss.h
--
2.7.4
next reply other threads:[~2018-06-22 15:43 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-22 15:33 Todor Tomov [this message]
2018-06-22 15:33 ` [PATCH 01/32] doc-rst: Add packed Bayer raw14 pixel formats Todor Tomov
2018-06-22 15:33 ` [PATCH 02/32] media: v4l: Add new 2X8 10-bit grayscale media bus code Todor Tomov
2018-06-22 15:33 ` [PATCH 03/32] media: v4l: Add new 10-bit packed grayscale format Todor Tomov
2018-06-22 15:33 ` [PATCH 04/32] media: Rename CAMSS driver path Todor Tomov
2018-06-26 13:53 ` Sakari Ailus
2018-06-22 15:33 ` [PATCH 05/32] media: camss: Use SPDX license headers Todor Tomov
2018-06-22 15:33 ` [PATCH 06/32] media: camss: Fix OF node usage Todor Tomov
2018-06-22 15:33 ` [PATCH 07/32] media: camss: csiphy: Ensure clock mux config is done before the rest Todor Tomov
2018-06-22 15:33 ` [PATCH 08/32] media: camss: Unify the clock names Todor Tomov
2018-07-02 7:46 ` Hans Verkuil
2018-06-22 15:33 ` [PATCH 09/32] media: camss: csiphy: Update settle count calculation Todor Tomov
2018-06-22 15:33 ` [PATCH 10/32] media: camss: csid: Configure data type and decode format properly Todor Tomov
2018-06-22 15:33 ` [PATCH 11/32] media: camss: vfe: Fix to_vfe() macro member name Todor Tomov
2018-06-22 15:33 ` [PATCH 12/32] media: camss: vfe: Get line pointer as container of video_out Todor Tomov
2018-06-22 15:33 ` [PATCH 13/32] media: camss: vfe: Do not disable CAMIF when clearing its status Todor Tomov
2018-06-22 15:33 ` [PATCH 14/32] media: dt-bindings: media: qcom,camss: Fix whitespaces Todor Tomov
2018-07-03 19:36 ` Rob Herring
2018-06-22 15:33 ` [PATCH 15/32] media: dt-bindings: media: qcom,camss: Add 8996 bindings Todor Tomov
2018-07-03 19:51 ` Rob Herring
2018-06-22 15:33 ` [PATCH 16/32] media: camss: Add 8x96 resources Todor Tomov
2018-06-22 15:33 ` [PATCH 17/32] media: camss: Add basic runtime PM support Todor Tomov
2018-06-22 15:33 ` [PATCH 18/32] media: camss: csiphy: Split to hardware dependent and independent parts Todor Tomov
2018-06-22 15:33 ` [PATCH 19/32] media: camss: csiphy: Unify lane handling Todor Tomov
2018-06-22 15:33 ` [PATCH 20/32] media: camss: csiphy: Add support for 8x96 Todor Tomov
2018-06-22 15:33 ` [PATCH 21/32] media: camss: csid: " Todor Tomov
2018-06-22 15:33 ` [PATCH 22/32] media: camss: ispif: " Todor Tomov
2018-06-22 15:33 ` [PATCH 23/32] media: camss: vfe: Split to hardware dependent and independent parts Todor Tomov
2018-06-22 15:33 ` [PATCH 24/32] media: camss: vfe: Add support for 8x96 Todor Tomov
2018-06-22 15:33 ` [PATCH 25/32] media: camss: Format configuration per hardware version Todor Tomov
2018-06-22 15:33 ` [PATCH 26/32] media: camss: vfe: Different format support on source pad Todor Tomov
2018-06-22 15:33 ` [PATCH 27/32] media: camss: vfe: Add support for UYVY output from VFE on 8x96 Todor Tomov
2018-06-22 15:33 ` [PATCH 28/32] media: camss: csid: Different format support on source pad Todor Tomov
2018-06-22 15:33 ` [PATCH 29/32] media: camss: csid: MIPI10 to Plain16 format conversion Todor Tomov
2018-06-22 15:33 ` [PATCH 30/32] media: camss: Add support for RAW MIPI14 on 8x96 Todor Tomov
2018-06-22 15:33 ` [PATCH 31/32] media: camss: Add support for 10-bit grayscale formats Todor Tomov
2018-06-22 15:33 ` [PATCH 32/32] media: doc: media/v4l-drivers: Update Qualcomm CAMSS driver document for 8x96 Todor Tomov
2018-07-02 8:01 ` [PATCH 00/32] Qualcomm Camera Subsystem driver - 8x96 support Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529681621-9682-1-git-send-email-todor.tomov@linaro.org \
--to=todor.tomov@linaro.org \
--cc=hans.verkuil@cisco.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®