From: Yannick Fertre <yannick.fertre@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
Benjamin Gaignard <benjamin.gaignard@linaro.org>,
Vincent Abriou <vincent.abriou@st.com>,
David Airlie <airlied@linux.ie>,
<dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH] drm/stm: ltdc: filter mode pixel clock vs pad constraint
Date: Fri, 29 Jun 2018 13:22:22 +0200 [thread overview]
Message-ID: <1530271342-5532-1-git-send-email-yannick.fertre@st.com> (raw)
Filter the requested mode pixel clock frequency according
to the pad maximum supported frequency.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
---
drivers/gpu/drm/stm/ltdc.c | 16 ++++++++++++----
drivers/gpu/drm/stm/ltdc.h | 1 +
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 00e3262..96d20c2 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -491,6 +491,14 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
int target_max = target + CLK_TOLERANCE_HZ;
int result;
+ result = clk_round_rate(ldev->pixel_clk, target);
+
+ DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result);
+
+ /* Filter modes according to the max frequency supported by the pads */
+ if (result > ldev->caps.pad_max_freq_hz)
+ return MODE_CLOCK_HIGH;
+
/*
* Accept all "preferred" modes:
* - this is important for panels because panel clock tolerances are
@@ -502,10 +510,6 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
if (mode->type & DRM_MODE_TYPE_PREFERRED)
return MODE_OK;
- result = clk_round_rate(ldev->pixel_clk, target);
-
- DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result);
-
/*
* Filter modes according to the clock value, particularly useful for
* hdmi modes that require precise pixel clocks.
@@ -1039,11 +1043,15 @@ static int ltdc_get_caps(struct drm_device *ddev)
* does not work on 2nd layer.
*/
ldev->caps.non_alpha_only_l1 = true;
+ ldev->caps.pad_max_freq_hz = 90000000;
+ if (ldev->caps.hw_version == HWVER_10200)
+ ldev->caps.pad_max_freq_hz = 65000000;
break;
case HWVER_20101:
ldev->caps.reg_ofs = REG_OFS_4;
ldev->caps.pix_fmt_hw = ltdc_pix_fmt_a1;
ldev->caps.non_alpha_only_l1 = false;
+ ldev->caps.pad_max_freq_hz = 150000000;
break;
default:
return -ENODEV;
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index c14e4db..0294d38 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -20,6 +20,7 @@ struct ltdc_caps {
u32 bus_width; /* bus width (32 or 64 bits) */
const u32 *pix_fmt_hw; /* supported pixel formats */
bool non_alpha_only_l1; /* non-native no-alpha formats on layer 1 */
+ int pad_max_freq_hz; /* max frequency supported by pad */
};
#define LTDC_MAX_LAYER 4
--
1.9.1
next reply other threads:[~2018-06-29 11:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-29 11:22 Yannick Fertre [this message]
2018-07-03 11:01 ` Philippe CORNU
2018-07-06 8:22 ` Benjamin Gaignard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530271342-5532-1-git-send-email-yannick.fertre@st.com \
--to=yannick.fertre@st.com \
--cc=airlied@linux.ie \
--cc=benjamin.gaignard@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=philippe.cornu@st.com \
--cc=vincent.abriou@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®