From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Mukesh Ojha <mojha@codeaurora.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@kernel.org>,
Miroslav Lichvar <mlichvar@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
Prarit Bhargava <prarit@redhat.com>,
Stephen Boyd <sboyd@kernel.org>,
John Stultz <john.stultz@linaro.org>
Subject: [PATCH 4/5] time: Fix extra sleeptime injection when suspend fails
Date: Thu, 19 Jul 2018 17:38:46 -0700 [thread overview]
Message-ID: <1532047127-26699-5-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1532047127-26699-1-git-send-email-john.stultz@linaro.org>
From: Mukesh Ojha <mojha@codeaurora.org>
Currently, there exists a corner case assuming when there is
only one clocksource e.g RTC, and system failed to go to
suspend mode. While resume rtc_resume() injects the sleeptime
as timekeeping_rtc_skipresume() returned 'false' (default value
of sleeptime_injected) due to which we can see mismatch in
timestamps.
This issue can also come in a system where more than one
clocksource are present and very first suspend fails.
Success case:
------------
{sleeptime_injected=false}
rtc_suspend() => timekeeping_suspend() => timekeeping_resume() =>
(sleeptime injected)
rtc_resume()
Failure case:
------------
{failure in sleep path} {sleeptime_injected=false}
rtc_suspend() => rtc_resume()
{sleeptime injected again which was not required as the suspend failed}
Fix this by handling the boolean logic properly.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
kernel/time/timekeeping.c | 32 +++++++++++++++++++++++++-------
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 7033ac1..19414b1 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1519,8 +1519,20 @@ void __weak read_boot_clock64(struct timespec64 *ts)
ts->tv_nsec = 0;
}
-/* Flag for if timekeeping_resume() has injected sleeptime */
-static bool sleeptime_injected;
+/*
+ * Flag reflecting whether timekeeping_resume() has injected sleeptime.
+ *
+ * The flag starts of false and is only set when a suspend reaches
+ * timekeeping_suspend(), timekeeping_resume() sets it to false when the
+ * timekeeper clocksource is not stopping across suspend and has been
+ * used to update sleep time. If the timekeeper clocksource has stopped
+ * then the flag stays true and is used by the RTC resume code to decide
+ * whether sleeptime must be injected and if so the flag gets false then.
+ *
+ * If a suspend fails before reaching timekeeping_resume() then the flag
+ * stays false and prevents erroneous sleeptime injection.
+ */
+static bool suspend_timing_needed;
/* Flag for if there is a persistent clock on this platform */
static bool persistent_clock_exists;
@@ -1619,7 +1631,7 @@ static void __timekeeping_inject_sleeptime(struct timekeeper *tk,
*/
bool timekeeping_rtc_skipresume(void)
{
- return sleeptime_injected;
+ return !suspend_timing_needed;
}
/**
@@ -1655,6 +1667,8 @@ void timekeeping_inject_sleeptime64(const struct timespec64 *delta)
raw_spin_lock_irqsave(&timekeeper_lock, flags);
write_seqcount_begin(&tk_core.seq);
+ suspend_timing_needed = false;
+
timekeeping_forward_now(tk);
__timekeeping_inject_sleeptime(tk, delta);
@@ -1679,8 +1693,8 @@ void timekeeping_resume(void)
unsigned long flags;
struct timespec64 ts_new, ts_delta;
u64 cycle_now;
+ bool inject_sleeptime = false;
- sleeptime_injected = false;
read_persistent_clock64(&ts_new);
clockevents_resume();
@@ -1710,14 +1724,16 @@ void timekeeping_resume(void)
tk->tkr_mono.mask);
nsec = mul_u64_u32_shr(cyc_delta, clock->mult, clock->shift);
ts_delta = ns_to_timespec64(nsec);
- sleeptime_injected = true;
+ inject_sleeptime = true;
} else if (timespec64_compare(&ts_new, &timekeeping_suspend_time) > 0) {
ts_delta = timespec64_sub(ts_new, timekeeping_suspend_time);
- sleeptime_injected = true;
+ inject_sleeptime = true;
}
- if (sleeptime_injected)
+ if (inject_sleeptime) {
+ suspend_timing_needed = false;
__timekeeping_inject_sleeptime(tk, &ts_delta);
+ }
/* Re-base the last cycle value */
tk->tkr_mono.cycle_last = cycle_now;
@@ -1752,6 +1768,8 @@ int timekeeping_suspend(void)
if (timekeeping_suspend_time.tv_sec || timekeeping_suspend_time.tv_nsec)
persistent_clock_exists = true;
+ suspend_timing_needed = true;
+
raw_spin_lock_irqsave(&timekeeper_lock, flags);
write_seqcount_begin(&tk_core.seq);
timekeeping_forward_now(tk);
--
2.7.4
next prev parent reply other threads:[~2018-07-20 0:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 0:38 [GIT PULL][PATCH 0/5] A few more timekeeping items for 4.19 John Stultz
2018-07-20 0:38 ` [PATCH 1/5] ntp: Remove redundant arguments John Stultz
2018-07-20 0:38 ` [PATCH 2/5] ntp: Use kstrtos64 for s64 variable John Stultz
2018-07-20 0:38 ` [PATCH 3/5] timekeeping/ntp: Constify some function arguments John Stultz
2018-07-20 0:38 ` John Stultz [this message]
2018-07-20 0:38 ` [PATCH 5/5] time: Introduce one suspend clocksource to compensate the suspend time John Stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1532047127-26699-5-git-send-email-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=mlichvar@redhat.com \
--cc=mojha@codeaurora.org \
--cc=prarit@redhat.com \
--cc=richardcochran@gmail.com \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®