mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Leonard Crestez <leonard.crestez@nxp.com>,
	Andrey Smirnov <andrew.smirnov@gmail.com>,
	Richard Zhu <hongxing.zhu@nxp.com>,
	Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Dong Aisheng <aisheng.dong@nxp.com>,
	linux-imx@nxp.com, kernel@pengutronix.de,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] PCI: imx: Initial imx7d pm support
Date: Tue, 24 Jul 2018 18:55:41 +0200	[thread overview]
Message-ID: <1532451341.32306.9.camel@pengutronix.de> (raw)
In-Reply-To: <acafccc294f15a281cf1d253c15a3eec2d1c8cc5.1532448745.git.leonard.crestez@nxp.com>

Am Dienstag, den 24.07.2018, 19:14 +0300 schrieb Leonard Crestez:
> On imx7d the pcie-phy power domain is turned off in suspend and this can
> make the system hang after resume when attempting any read from PCI.
> 
> Fix this by adding minimal suspend/resume code from the nxp internal
> tree. This will prepare for powering down on suspend and reset the block
> on resume.
> 
> Code is only for imx7d but a very similar sequence can be used for
> other socs.
> 
> > The original author is mostly Richard Zhu <hongxing.zhu@nxp.com>, this
> patch adjusts the code to the upstream imx7d implemention using reset
> controls and power domains.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 97 +++++++++++++++++++++++++--
>  1 file changed, 92 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 4a9a673b4777..65b6d1015723 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -540,10 +540,28 @@ static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
>  
> >  	dev_err(dev, "Speed change timeout\n");
> >  	return -EINVAL;
>  }
>  
> +static void imx6_pcie_ltssm_enable(struct device *dev)
> +{
> > +	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> +
> > +	switch (imx6_pcie->variant) {
> > +	case IMX6Q:
> > +	case IMX6SX:
> > +	case IMX6QP:
> > +		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > +				   IMX6Q_GPR12_PCIE_CTL_2,
> > +				   IMX6Q_GPR12_PCIE_CTL_2);
> > +		break;
> > +	case IMX7D:
> > +		reset_control_deassert(imx6_pcie->apps_reset);
> > +		break;
> > +	}
> +}
> +
>  static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
>  {
> >  	struct dw_pcie *pci = imx6_pcie->pci;
> >  	struct device *dev = pci->dev;
> >  	u32 tmp;
> @@ -558,15 +576,11 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
> >  	tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
> >  	tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
> >  	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
>  
> >  	/* Start LTSSM. */
> > -	if (imx6_pcie->variant == IMX7D)
> > -		reset_control_deassert(imx6_pcie->apps_reset);
> > -	else
> > -		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > -				   IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
> > +	imx6_pcie_ltssm_enable(dev);
>  
> >  	ret = imx6_pcie_wait_for_link(imx6_pcie);
> >  	if (ret)
> >  		goto err_reset_phy;
>  
> @@ -680,10 +694,82 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
>  
>  static const struct dw_pcie_ops dw_pcie_ops = {
> >  	.link_up = imx6_pcie_link_up,
>  };
>  
> +#ifdef CONFIG_PM_SLEEP
> +static void imx6_pcie_ltssm_disable(struct device *dev)
> +{
> > +	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> +
> > +	switch (imx6_pcie->variant) {
> > +	case IMX6SX:
> > +	case IMX6QP:
> > +		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > +				   IMX6Q_GPR12_PCIE_CTL_2, 0);
> > +		break;
> > +	case IMX7D:
> > +		reset_control_assert(imx6_pcie->apps_reset);
> > +		break;
> > +	default:
> > +		dev_err(dev, "ltssm_disable not supported\n");
> > +	}
> +}
> +
> +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> +{
> > +	clk_disable_unprepare(imx6_pcie->pcie);
> > +	clk_disable_unprepare(imx6_pcie->pcie_phy);
> > +	clk_disable_unprepare(imx6_pcie->pcie_bus);
> +
> > +	if (imx6_pcie->variant == IMX7D) {
> > +		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> > +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> > +	}
> +}
> +
> +static int imx6_pcie_suspend_noirq(struct device *dev)
> +{
> > +	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> +
> > +	if (imx6_pcie->variant != IMX7D)
> > +		return 0;
> +
> > +	imx6_pcie_clk_disable(imx6_pcie);
> > +	imx6_pcie_ltssm_disable(dev);
> +
> > +	return 0;
> +}
> +
> +static int imx6_pcie_resume_noirq(struct device *dev)
> +{
> > +	int ret;
> > +	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> > +	struct pcie_port *pp = &imx6_pcie->pci->pp;
> +
> > +	if (imx6_pcie->variant != IMX7D)
> > +		return 0;
> +
> > +	imx6_pcie_assert_core_reset(imx6_pcie);
> > +	imx6_pcie_init_phy(imx6_pcie);
> > +	imx6_pcie_deassert_core_reset(imx6_pcie);
> > +	dw_pcie_setup_rc(pp);
> +
> > +	ret = imx6_pcie_establish_link(imx6_pcie);
> > +	if (ret < 0)
> > +		dev_info(dev, "pcie link is down after resume.\n");
> +
> > +	return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops imx6_pcie_pm_ops = {
> > +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
> > +				      imx6_pcie_resume_noirq)
> +};
> +
>  static int imx6_pcie_probe(struct platform_device *pdev)
>  {
> >  	struct device *dev = &pdev->dev;
> >  	struct dw_pcie *pci;
> >  	struct imx6_pcie *imx6_pcie;
> @@ -846,10 +932,11 @@ static const struct of_device_id imx6_pcie_of_match[] = {
>  static struct platform_driver imx6_pcie_driver = {
> >  	.driver = {
> > >  		.name	= "imx6q-pcie",
> >  		.of_match_table = imx6_pcie_of_match,
> >  		.suppress_bind_attrs = true,
> > +		.pm = &imx6_pcie_pm_ops,
> >  	},
> >  	.probe    = imx6_pcie_probe,
> >  	.shutdown = imx6_pcie_shutdown,
>  };
>  

  reply	other threads:[~2018-07-24 16:55 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-24 16:14 [PATCH v3 0/2] " Leonard Crestez
2018-07-24 16:14 ` [PATCH v3 1/2] Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" Leonard Crestez
2018-07-24 16:52   ` Lucas Stach
2018-08-21 15:31   ` Shawn Guo
2018-07-24 16:14 ` [PATCH v3 2/2] PCI: imx: Initial imx7d pm support Leonard Crestez
2018-07-24 16:55   ` Lucas Stach [this message]
2018-08-08 10:53 ` [PATCH v3 0/2] " Leonard Crestez
2018-08-08 11:14   ` Lorenzo Pieralisi
2018-08-08 11:37     ` Leonard Crestez
2018-08-08 14:19       ` Lorenzo Pieralisi
2018-08-08 14:58         ` Leonard Crestez
2018-08-08 15:27           ` Lorenzo Pieralisi
2018-08-10 11:11             ` Leonard Crestez
2018-08-10 15:13               ` Lorenzo Pieralisi
2018-08-21 15:26                 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1532451341.32306.9.camel@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=Anson.Huang@nxp.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=aisheng.dong@nxp.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=fabio.estevam@nxp.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=jingoohan1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome