mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Akshu Agrawal <akshu.agrawal@amd.com>
To: unlisted-recipients:; (no To-header on input)
Cc: djkurtz@chromium.org, akshu.agrawal@amd.com,
	Alexander.Deucher@amd.com, Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	"Mukunda, Vijendar" <Vijendar.Mukunda@amd.com>,
	Alex Deucher <alexander.deucher@amd.com>,
	Guenter Roeck <linux@roeck-us.net>,
	alsa-devel@alsa-project.org (moderated list:SOUND - SOC LAYER /
	DYNAMIC AUDIO POWER MANAGEM...),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2 3/3] ASoC: AMD: Set delay value for the capture case
Date: Mon,  6 Aug 2018 12:57:16 +0530	[thread overview]
Message-ID: <1533540439-18735-3-git-send-email-akshu.agrawal@amd.com> (raw)
In-Reply-To: <1533540439-18735-1-git-send-email-akshu.agrawal@amd.com>

ACP->SYSMEM DMA happens at every I2S->SYSMEM period
completion. Thus, there is delay of x frames till
I2S->SYSMEM reaches a period length. This delay is
communicated to user space.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
---
v2: moved reading of bytes transfered from I2S->ACP to get
more accurate delay information.
 sound/soc/amd/acp-pcm-dma.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 32f27c5..e359938 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -922,6 +922,10 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
 			rtd->destination = FROM_BLUETOOTH;
 			rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH10;
 			rtd->dma_dscr_idx_2 = CAPTURE_START_DMA_DESCR_CH11;
+			rtd->byte_cnt_high_reg_offset =
+					mmACP_I2S_BT_RECEIVE_BYTE_CNT_HIGH;
+			rtd->byte_cnt_low_reg_offset =
+					mmACP_I2S_BT_RECEIVE_BYTE_CNT_LOW;
 			rtd->dma_curr_dscr = mmACP_DMA_CUR_DSCR_11;
 			adata->capture_i2sbt_stream = substream;
 			break;
@@ -942,6 +946,10 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
 			rtd->destination = FROM_ACP_I2S_1;
 			rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH14;
 			rtd->dma_dscr_idx_2 = CAPTURE_START_DMA_DESCR_CH15;
+			rtd->byte_cnt_high_reg_offset =
+					mmACP_I2S_RECEIVED_BYTE_CNT_HIGH;
+			rtd->byte_cnt_low_reg_offset =
+					mmACP_I2S_RECEIVED_BYTE_CNT_LOW;
 			rtd->dma_curr_dscr = mmACP_DMA_CUR_DSCR_15;
 			adata->capture_i2ssp_stream = substream;
 		}
@@ -997,7 +1005,7 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream)
 	u32 pos = 0;
 	u64 bytescount = 0;
 	u16 dscr;
-	u32 period_bytes;
+	u32 period_bytes, delay;
 
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct audio_substream_data *rtd = runtime->private_data;
@@ -1012,6 +1020,11 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream)
 			pos = period_bytes;
 		else
 			pos = 0;
+		bytescount = acp_get_byte_count(rtd);
+		if (bytescount > rtd->bytescount)
+			bytescount -= rtd->bytescount;
+		delay = do_div(bytescount, period_bytes);
+		runtime->delay = bytes_to_frames(runtime, delay);
 	} else {
 		buffersize = frames_to_bytes(runtime, runtime->buffer_size);
 		bytescount = acp_get_byte_count(rtd);
-- 
1.9.1


  parent reply	other threads:[~2018-08-06  7:29 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-06  7:27 [PATCH 1/3] ASoC: AMD: Make ACP->SYSMEM DMA non circular Akshu Agrawal
2018-08-06  7:27 ` [PATCH v2 2/3] ASoC: AMD: Modified DMA pointer for capture Akshu Agrawal
2018-08-06 16:06   ` Applied "ASoC: AMD: Modified DMA pointer for capture" to the asoc tree Mark Brown
2018-08-06  7:27 ` Akshu Agrawal [this message]
2018-08-06 16:06   ` Applied "ASoC: AMD: Set delay value for the capture case" " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1533540439-18735-3-git-send-email-akshu.agrawal@amd.com \
    --to=akshu.agrawal@amd.com \
    --cc=Alexander.Deucher@amd.com \
    --cc=Vijendar.Mukunda@amd.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=djkurtz@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®