From: "Chang S. Bae" <chang.seok.bae@intel.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Andy Lutomirski <luto@kernel.org>,
"H . Peter Anvin" <hpa@zytor.com>, Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Markus T Metzger <markus.t.metzger@intel.com>,
Ravi Shankar <ravi.v.shankar@intel.com>,
"Chang S . Bae" <chang.seok.bae@intel.com>,
LKML <linux-kernel@vger.kernel.org>
Subject: [RESEND PATCH V5 8/8] x86/vdso: Move out the CPU initialization
Date: Thu, 23 Aug 2018 09:44:38 -0700 [thread overview]
Message-ID: <1535042678-31366-9-git-send-email-chang.seok.bae@intel.com> (raw)
In-Reply-To: <1535042678-31366-1-git-send-email-chang.seok.bae@intel.com>
The CPU and node number will be written, as early enough,
to the segment limit of per CPU data and TSC_AUX MSR entry.
The information has been retrieved by vgetcpu in user space
and will be also loaded from the paranoid entry, when
FSGSBASE enabled.
The new setup function is named after the getcpu(2) system
call, and will be called during each CPU initialization
(before setting up IST). It makes a facility useful to both
the kernel and userspace unconditionally available much
sooner.
The change brings a substantial code removal. The redundant
setting of the segment in entry/vdso/vma.c and hotplug
notifier are removed.
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
---
arch/x86/entry/vdso/vma.c | 33 +--------------------------------
arch/x86/kernel/cpu/common.c | 24 ++++++++++++++++++++++++
2 files changed, 25 insertions(+), 32 deletions(-)
diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
index 378732a..3f9d43f 100644
--- a/arch/x86/entry/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
@@ -332,35 +332,6 @@ static __init int vdso_setup(char *s)
return 0;
}
__setup("vdso=", vdso_setup);
-#endif
-
-#ifdef CONFIG_X86_64
-static void vgetcpu_cpu_init(void *arg)
-{
- int cpu = smp_processor_id();
- struct desc_struct d = { };
- unsigned long cpudata = vdso_encode_cpu_node(cpu, cpu_to_node(cpu));
-
- if (static_cpu_has(X86_FEATURE_RDTSCP))
- write_rdtscp_aux(cpudata);
-
- /* Store cpu and node number in limit */
- d.limit0 = cpudata;
- d.limit1 = cpudata >> 16;
-
- d.type = 5; /* RO data, expand down, accessed */
- d.dpl = 3; /* Visible to user code */
- d.s = 1; /* Not a system segment */
- d.p = 1; /* Present */
- d.d = 1; /* 32-bit */
-
- write_gdt_entry(get_cpu_gdt_rw(cpu), GDT_ENTRY_CPU_NUMBER, &d, DESCTYPE_S);
-}
-
-static int vgetcpu_online(unsigned int cpu)
-{
- return smp_call_function_single(cpu, vgetcpu_cpu_init, NULL, 1);
-}
static int __init init_vdso(void)
{
@@ -370,9 +341,7 @@ static int __init init_vdso(void)
init_vdso_image(&vdso_image_x32);
#endif
- /* notifier priority > KVM */
- return cpuhp_setup_state(CPUHP_AP_X86_VDSO_VMA_ONLINE,
- "x86/vdso/vma:online", vgetcpu_online, NULL);
+ return 0;
}
subsys_initcall(init_vdso);
#endif /* CONFIG_X86_64 */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index eb4cb3e..e418e31 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1651,6 +1651,29 @@ static void wait_for_master_cpu(int cpu)
#endif
}
+#ifdef CONFIG_X86_64
+static void setup_getcpu(int cpu)
+{
+ unsigned long cpudata = vdso_encode_cpu_node(cpu, early_cpu_to_node(cpu));
+ struct desc_struct d = { };
+
+ if (static_cpu_has(X86_FEATURE_RDTSCP))
+ write_rdtscp_aux(cpudata);
+
+ /* Store cpu and node number in limit. */
+ d.limit0 = cpudata;
+ d.limit1 = cpudata >> 16;
+
+ d.type = 5; /* RO data, expand down, accessed */
+ d.dpl = 3; /* Visible to user code */
+ d.s = 1; /* Not a system segment */
+ d.p = 1; /* Present */
+ d.d = 1; /* 32-bit */
+
+ write_gdt_entry(get_cpu_gdt_rw(cpu), GDT_ENTRY_CPU_NUMBER, &d, DESCTYPE_S);
+}
+#endif
+
/*
* cpu_init() initializes state that is per-CPU. Some data is already
* initialized (naturally) in the bootstrap process, such as the GDT
@@ -1688,6 +1711,7 @@ void cpu_init(void)
early_cpu_to_node(cpu) != NUMA_NO_NODE)
set_numa_node(early_cpu_to_node(cpu));
#endif
+ setup_getcpu(cpu);
me = current;
--
2.7.4
next prev parent reply other threads:[~2018-08-23 16:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-23 16:44 [RESEND PATCH V5 0/8] x86: infrastructure to enable FSGSBASE Chang S. Bae
2018-08-23 16:44 ` [RESEND PATCH V5 1/8] x86/arch_prctl/64: Make ptrace read FS/GS base accurately Chang S. Bae
2018-08-23 16:44 ` [RESEND PATCH V5 2/8] x86/fsgsbase/64: Introduce FS/GS base helper functions Chang S. Bae
2018-08-23 16:44 ` [RESEND PATCH V5 3/8] x86/fsgsbase/64: Make ptrace use FS/GS base helpers Chang S. Bae
2018-08-23 16:44 ` [RESEND PATCH V5 4/8] x86/fsgsbase/64: Use FS/GS base helpers in core dump Chang S. Bae
2018-08-23 16:44 ` [RESEND PATCH V5 5/8] x86/fsgsbase/64: Factor out load FS/GS segments from __switch_to Chang S. Bae
2018-08-23 16:44 ` [RESEND PATCH V5 6/8] x86/segments/64: Rename PER_CPU segment to CPU_NUMBER Chang S. Bae
2018-08-23 16:44 ` [RESEND PATCH V5 7/8] x86/vdso: Introduce helper functions for CPU and node number Chang S. Bae
2018-08-23 16:44 ` Chang S. Bae [this message]
2018-09-14 9:27 ` [RESEND PATCH V5 0/8] x86: infrastructure to enable FSGSBASE Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1535042678-31366-9-git-send-email-chang.seok.bae@intel.com \
--to=chang.seok.bae@intel.com \
--cc=ak@linux.intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=markus.t.metzger@intel.com \
--cc=mingo@kernel.org \
--cc=ravi.v.shankar@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®