[PATCH 1/2] vgaarb: Add support for 64-bit frame buffer address

[Aaron Ma <aaron.ma@canonical.com>]

EFI GOP uses 64-bit frame buffer address when some BIOS
disabled CSM support. vgaarb only stores lfb_base,
this will lead boot framebuffer to wrong device.

Add ext_lfb_base support to use 64-bit fb address.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
---
 drivers/gpu/vga/vgaarb.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index c61b04555779..8d90e66994b0 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -1408,6 +1408,18 @@ static void __init vga_arb_select_default_device(void)
 	struct vga_device *vgadev;
 
 #if defined(CONFIG_X86) || defined(CONFIG_IA64)
+	u64 base = screen_info.lfb_base;
+	u64 size = screen_info.lfb_size;
+	u64 limit;
+	resource_size_t start, end;
+	unsigned long flags;
+	int i;
+
+	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		base |= (u64)screen_info.ext_lfb_base << 32;
+
+	limit = base + size;
+
 	list_for_each_entry(vgadev, &vga_list, list) {
 		struct device *dev = &vgadev->pdev->dev;
 		/*
@@ -1418,11 +1430,6 @@ static void __init vga_arb_select_default_device(void)
 		 * Select the device owning the boot framebuffer if there is
 		 * one.
 		 */
-		resource_size_t start, end, limit;
-		unsigned long flags;
-		int i;
-
-		limit = screen_info.lfb_base + screen_info.lfb_size;
 
 		/* Does firmware framebuffer belong to us? */
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
@@ -1437,7 +1444,7 @@ static void __init vga_arb_select_default_device(void)
 			if (!start || !end)
 				continue;
 
-			if (screen_info.lfb_base < start || limit >= end)
+			if (base < start || limit >= end)
 				continue;
 
 			if (!vga_default_device())
-- 
2.17.1