mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Greg Kroah-Hartman <greg@kroah.com>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] SCSI fixes for 4.19-rc3
Date: Wed, 19 Sep 2018 07:14:45 -0400	[thread overview]
Message-ID: <1537355685.4640.5.camel@HansenPartnership.com> (raw)

A couple of small but important fixes, one affecting big endian and the
other fixing a BUG_ON in scatterlist processing.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Dan Carpenter (1):
      scsi: qla2xxx: Fix an endian bug in fcpcmd_is_corrupted()

Laura Abbott (1):
      scsi: iscsi: target: Don't use stack buffer for scatterlist

And the diffstat:

 drivers/scsi/qla2xxx/qla_target.h   |  4 ++--
 drivers/target/iscsi/iscsi_target.c | 22 ++++++++++++++--------
 2 files changed, 16 insertions(+), 10 deletions(-)

With full diff below.

James

---

diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index fecf96f0225c..199d3ba1916d 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -374,8 +374,8 @@ struct atio_from_isp {
 static inline int fcpcmd_is_corrupted(struct atio *atio)
 {
 	if (atio->entry_type == ATIO_TYPE7 &&
-	    (le16_to_cpu(atio->attr_n_length & FCP_CMD_LENGTH_MASK) <
-	    FCP_CMD_LENGTH_MIN))
+	    ((le16_to_cpu(atio->attr_n_length) & FCP_CMD_LENGTH_MASK) <
+	     FCP_CMD_LENGTH_MIN))
 		return 1;
 	else
 		return 0;
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 9cdfccbdd06f..cc756a123fd8 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1416,7 +1416,8 @@ static void iscsit_do_crypto_hash_buf(struct ahash_request *hash,
 
 	sg_init_table(sg, ARRAY_SIZE(sg));
 	sg_set_buf(sg, buf, payload_length);
-	sg_set_buf(sg + 1, pad_bytes, padding);
+	if (padding)
+		sg_set_buf(sg + 1, pad_bytes, padding);
 
 	ahash_request_set_crypt(hash, sg, data_crc, payload_length + padding);
 
@@ -3910,10 +3911,14 @@ static bool iscsi_target_check_conn_state(struct iscsi_conn *conn)
 static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 {
 	int ret;
-	u8 buffer[ISCSI_HDR_LEN], opcode;
+	u8 *buffer, opcode;
 	u32 checksum = 0, digest = 0;
 	struct kvec iov;
 
+	buffer = kcalloc(ISCSI_HDR_LEN, sizeof(*buffer), GFP_KERNEL);
+	if (!buffer)
+		return;
+
 	while (!kthread_should_stop()) {
 		/*
 		 * Ensure that both TX and RX per connection kthreads
@@ -3921,7 +3926,6 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 		 */
 		iscsit_thread_check_cpumask(conn, current, 0);
 
-		memset(buffer, 0, ISCSI_HDR_LEN);
 		memset(&iov, 0, sizeof(struct kvec));
 
 		iov.iov_base	= buffer;
@@ -3930,7 +3934,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 		ret = rx_data(conn, &iov, 1, ISCSI_HDR_LEN);
 		if (ret != ISCSI_HDR_LEN) {
 			iscsit_rx_thread_wait_for_tcp(conn);
-			return;
+			break;
 		}
 
 		if (conn->conn_ops->HeaderDigest) {
@@ -3940,7 +3944,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 			ret = rx_data(conn, &iov, 1, ISCSI_CRC_LEN);
 			if (ret != ISCSI_CRC_LEN) {
 				iscsit_rx_thread_wait_for_tcp(conn);
-				return;
+				break;
 			}
 
 			iscsit_do_crypto_hash_buf(conn->conn_rx_hash, buffer,
@@ -3964,7 +3968,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 		}
 
 		if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT)
-			return;
+			break;
 
 		opcode = buffer[0] & ISCSI_OPCODE_MASK;
 
@@ -3975,13 +3979,15 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 			" while in Discovery Session, rejecting.\n", opcode);
 			iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
 					  buffer);
-			return;
+			break;
 		}
 
 		ret = iscsi_target_rx_opcode(conn, buffer);
 		if (ret < 0)
-			return;
+			break;
 	}
+
+	kfree(buffer);
 }
 
 int iscsi_target_rx_thread(void *arg)

             reply	other threads:[~2018-09-19 11:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-19 11:14 James Bottomley [this message]
2018-09-19 20:59 ` Greg Kroah-Hartman
  -- strict thread matches above, loose matches on Subject: below --
2018-09-12 11:29 James Bottomley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1537355685.4640.5.camel@HansenPartnership.com \
    --to=james.bottomley@hansenpartnership.com \
    --cc=akpm@linux-foundation.org \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome