From: <Claudiu.Beznea@microchip.com>
To: <sre@kernel.org>, <Nicolas.Ferre@microchip.com>,
<alexandre.belloni@bootlin.com>
Cc: <linux-pm@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <Claudiu.Beznea@microchip.com>
Subject: [PATCH 2/4] power: reset: at91-poweroff: move shdwc related data to one structure
Date: Mon, 5 Nov 2018 11:14:26 +0000 [thread overview]
Message-ID: <1541416443-4321-3-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1541416443-4321-1-git-send-email-claudiu.beznea@microchip.com>
Move SHDWC realted data to only one structure to have them grouped.
Inspired from commit 9be74f0d39c1 ("power: reset: at91-poweroff: make
mpddrc_base part of struct shdwc").
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/power/reset/at91-poweroff.c | 60 +++++++++++++++++++++++--------------
1 file changed, 37 insertions(+), 23 deletions(-)
diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c
index 82533f4c72fc..48661e04a3de 100644
--- a/drivers/power/reset/at91-poweroff.c
+++ b/drivers/power/reset/at91-poweroff.c
@@ -51,14 +51,19 @@ static const char *shdwc_wakeup_modes[] = {
[AT91_SHDW_WKMODE0_ANYLEVEL] = "any",
};
-static void __iomem *at91_shdwc_base;
-static struct clk *sclk;
-static void __iomem *mpddrc_base;
+struct shdwc {
+ struct clk *sclk;
+ void __iomem *shdwc_base;
+ void __iomem *mpddrc_base;
+};
+
+static struct shdwc *at91_shdwc;
static void __init at91_wakeup_status(struct platform_device *pdev)
{
+ struct shdwc *shdwc = platform_get_drvdata(pdev);
const char *reason;
- u32 reg = readl(at91_shdwc_base + AT91_SHDW_SR);
+ u32 reg = readl(shdwc->shdwc_base + AT91_SHDW_SR);
/* Simple power-on, just bail out */
if (!reg)
@@ -92,9 +97,9 @@ static void at91_poweroff(void)
" b .\n\t"
:
- : "r" (mpddrc_base),
+ : "r" (at91_shdwc->mpddrc_base),
"r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
- "r" (at91_shdwc_base),
+ "r" (at91_shdwc->shdwc_base),
"r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
: "r6");
}
@@ -118,6 +123,7 @@ static int at91_poweroff_get_wakeup_mode(struct device_node *np)
static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev)
{
+ struct shdwc *shdwc = platform_get_drvdata(pdev);
struct device_node *np = pdev->dev.of_node;
int wakeup_mode;
u32 mode = 0, tmp;
@@ -144,7 +150,7 @@ static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev)
if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
mode |= AT91_SHDW_RTTWKEN;
- writel(wakeup_mode | mode, at91_shdwc_base + AT91_SHDW_MR);
+ writel(wakeup_mode | mode, shdwc->shdwc_base + AT91_SHDW_MR);
}
static int __init at91_poweroff_probe(struct platform_device *pdev)
@@ -154,16 +160,22 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
u32 ddr_type;
int ret;
+ at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL);
+ if (!at91_shdwc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, at91_shdwc);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(at91_shdwc_base))
- return PTR_ERR(at91_shdwc_base);
+ at91_shdwc->shdwc_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(at91_shdwc->shdwc_base))
+ return PTR_ERR(at91_shdwc->shdwc_base);
- sclk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(sclk))
- return PTR_ERR(sclk);
+ at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(at91_shdwc->sclk))
+ return PTR_ERR(at91_shdwc->sclk);
- ret = clk_prepare_enable(sclk);
+ ret = clk_prepare_enable(at91_shdwc->sclk);
if (ret) {
dev_err(&pdev->dev, "Could not enable slow clock\n");
return ret;
@@ -176,20 +188,20 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
if (np) {
- mpddrc_base = of_iomap(np, 0);
+ at91_shdwc->mpddrc_base = of_iomap(np, 0);
of_node_put(np);
- if (!mpddrc_base) {
+ if (!at91_shdwc->mpddrc_base) {
ret = -ENOMEM;
goto clk_disable;
}
- ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) &
+ ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
AT91_DDRSDRC_MD;
if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
- iounmap(mpddrc_base);
- mpddrc_base = NULL;
+ iounmap(at91_shdwc->mpddrc_base);
+ at91_shdwc->mpddrc_base = NULL;
}
}
@@ -198,19 +210,21 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
return 0;
clk_disable:
- clk_disable_unprepare(sclk);
+ clk_disable_unprepare(at91_shdwc->sclk);
return ret;
}
static int __exit at91_poweroff_remove(struct platform_device *pdev)
{
+ struct shdwc *shdwc = platform_get_drvdata(pdev);
+
if (pm_power_off == at91_poweroff)
pm_power_off = NULL;
- if (mpddrc_base)
- iounmap(mpddrc_base);
+ if (shdwc->mpddrc_base)
+ iounmap(shdwc->mpddrc_base);
- clk_disable_unprepare(sclk);
+ clk_disable_unprepare(shdwc->sclk);
return 0;
}
--
2.7.4
next prev parent reply other threads:[~2018-11-05 11:14 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 11:14 [PATCH 0/4] power: reset: at91-poweroff: cleanups Claudiu.Beznea
2018-11-05 11:14 ` [PATCH 1/4] power: reset: at91-poweroff: use one poweroff function for at91-poweroff Claudiu.Beznea
2018-12-05 22:37 ` Sebastian Reichel
2018-11-05 11:14 ` Claudiu.Beznea [this message]
2018-11-06 21:09 ` [PATCH 2/4] power: reset: at91-poweroff: move shdwc related data to one structure Alexandre Belloni
2018-11-07 14:54 ` Claudiu.Beznea
2018-11-07 17:23 ` Alexandre Belloni
2018-12-05 22:40 ` Sebastian Reichel
2018-12-06 9:48 ` Claudiu.Beznea
2018-11-05 11:14 ` [PATCH 3/4] power: reset: at91-poweroff: check shdwc data structure at the beginning of probe Claudiu.Beznea
2018-12-05 22:38 ` Sebastian Reichel
2018-11-05 11:14 ` [PATCH 4/4] power: reset: at91-poweroff: remove at91_ramc_of_match Claudiu.Beznea
2018-12-05 22:37 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541416443-4321-3-git-send-email-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®