[PATCH 2/3] arm64: dts: ti: k3-am6: add USB support

[Roger Quadros <rogerq@ti.com>]

Adds support for USB0 and USB1 instances on the AM6 SoC.
USB0 is limited to high-speed for now.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 80 ++++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 8b55108..680cbc7 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -199,4 +199,84 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 	};
+
+	dwc3_0: dwc3@4000000 {
+		compatible = "ti,am654-dwc3";
+		reg = <0x0 0x4000000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x4000000 0x20000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		dma-coherent;
+		status = "disabled";
+		power-domains = <&k3_pds 151>;
+		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
+		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
+
+		usb0: usb@10000 {
+			compatible = "snps,dwc3";
+			reg = <0x10000 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "peripheral",
+					  "host",
+					  "otg";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			snps,dis_u3_susphy_quirk;
+		};
+	};
+
+	usb0_phy: phy@4100000 {
+		compatible = "ti,am654-usb2", "ti,omap-usb2";
+		reg = <0x0 0x4100000 0x0 0x54>;
+		syscon-phy-power = <&scm_conf 0x4000>;
+		clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+		clock-names = "wkupclk", "refclk";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	dwc3_1: dwc3@4020000 {
+		compatible = "ti,am654-dwc3";
+		reg = <0x0 0x4020000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x4020000 0x20000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		dma-coherent;
+		status = "disabled";
+		power-domains = <&k3_pds 152>;
+		assigned-clocks = <&k3_clks 152 2>;
+		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+
+		usb1: usb@10000 {
+			compatible = "snps,dwc3";
+			reg = <0x10000 0x10000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "peripheral",
+					  "host",
+					  "otg";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	usb1_phy: phy@4110000 {
+		compatible = "ti,am654-usb2", "ti,omap-usb2";
+		reg = <0x0 0x4110000 0x0 0x54>;
+		syscon-phy-power = <&scm_conf 0x4020>;
+		clocks = <&k3_clks 152 0>, <&k3_clks 152 1>;
+		clock-names = "wkupclk", "refclk";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
 };
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki