mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Huazhong Tan <tanhuazhong@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
	<linuxarm@huawei.com>, Huazhong Tan <tanhuazhong@huawei.com>,
	Yunsheng Lin <linyunsheng@huawei.com>,
	Peng Li <lipeng321@huawei.com>
Subject: [PATCH net-next 01/12] net: hns3: modify enet reinitialization interface
Date: Fri, 18 Jan 2019 16:13:03 +0800	[thread overview]
Message-ID: <1547799194-38212-2-git-send-email-tanhuazhong@huawei.com> (raw)
In-Reply-To: <1547799194-38212-1-git-send-email-tanhuazhong@huawei.com>

hns3_reset_notify_init_enet and hns3_reset_notify_uninit_enet are the
reinitialization interface that will be called when the device reset,
the number of TC changed, or the queue length changed. So these two
function should call hns3_get_ring_config() and hns3_put_ring_config()
to allocate and free memory for the ring with the correct number.

Also this patch fixes a double free problem when
hns3_reset_notify_uninit_enet calling hns3_nic_dealloc_vector_data

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 1bf7a5f..e0621ef 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -3185,6 +3185,9 @@ static int hns3_nic_uninit_vector_data(struct hns3_nic_priv *priv)
 	for (i = 0; i < priv->vector_num; i++) {
 		tqp_vector = &priv->tqp_vector[i];
 
+		if (!tqp_vector->rx_group.ring && !tqp_vector->tx_group.ring)
+			continue;
+
 		ret = hns3_get_vector_ring_chain(tqp_vector,
 						 &vector_ring_chain);
 		if (ret)
@@ -3238,6 +3241,7 @@ static int hns3_ring_get_cfg(struct hnae3_queue *q, struct hns3_nic_priv *priv,
 {
 	struct hns3_nic_ring_data *ring_data = priv->ring_data;
 	int queue_num = priv->ae_handle->kinfo.num_tqps;
+	int desc_num = priv->ae_handle->kinfo.num_desc;
 	struct pci_dev *pdev = priv->ae_handle->pdev;
 	struct hns3_enet_ring *ring;
 
@@ -3263,7 +3267,7 @@ static int hns3_ring_get_cfg(struct hnae3_queue *q, struct hns3_nic_priv *priv,
 	ring->dev = priv->dev;
 	ring->desc_dma_addr = 0;
 	ring->buf_size = q->buf_size;
-	ring->desc_num = q->desc_num;
+	ring->desc_num = desc_num;
 	ring->next_to_use = 0;
 	ring->next_to_clean = 0;
 
@@ -4045,10 +4049,14 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
 	/* Carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
 
-	ret = hns3_nic_alloc_vector_data(priv);
+	ret = hns3_get_ring_config(priv);
 	if (ret)
 		return ret;
 
+	ret = hns3_nic_alloc_vector_data(priv);
+	if (ret)
+		goto err_put_ring;
+
 	hns3_restore_coal(priv);
 
 	ret = hns3_nic_init_vector_data(priv);
@@ -4068,6 +4076,9 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
 	priv->ring_data = NULL;
 err_dealloc_vector:
 	hns3_nic_dealloc_vector_data(priv);
+err_put_ring:
+	hns3_put_ring_config(priv);
+	priv->ring_data = NULL;
 
 	return ret;
 }
@@ -4101,6 +4112,9 @@ static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
 	if (ret)
 		netdev_err(netdev, "uninit ring error\n");
 
+	hns3_put_ring_config(priv);
+	priv->ring_data = NULL;
+
 	clear_bit(HNS3_NIC_STATE_INITED, &priv->state);
 
 	return ret;
-- 
2.7.4


  reply	other threads:[~2019-01-18  8:13 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-18  8:13 [PATCH net-next 00/12] net: hns3: code optimizations & bugfixes for HNS3 driver Huazhong Tan
2019-01-18  8:13 ` Huazhong Tan [this message]
2019-01-18  8:13 ` [PATCH net-next 02/12] net: hns3: remove unused member in struct hns3_enet_ring Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 03/12] net: hns3: remove unnecessary hns3_adjust_tqps_num Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 04/12] net: hns3: reuse reinitialization interface in the hns3_set_channels Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 05/12] net: hns3: add interface hclge_tm_bp_setup Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 06/12] net: hns3: modify parameter checks in the hns3_set_channels Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 07/12] net: hns3: remove redundant codes in hclge_knic_setup Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 08/12] net: hns3: fix user configuration loss for ethtool -L Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 09/12] net: hns3: adjust the use of alloc_tqps and num_tqps Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 10/12] net: hns3: fix wrong combined count returned by ethtool -l Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 11/12] net: hns3: do reinitialization while ETS configuration changed Huazhong Tan
2019-01-18  8:13 ` [PATCH net-next 12/12] net: hns3: add HNAE3_RESTORE_CLIENT interface in enet module Huazhong Tan
2019-01-18 23:10 ` [PATCH net-next 00/12] net: hns3: code optimizations & bugfixes for HNS3 driver David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1547799194-38212-2-git-send-email-tanhuazhong@huawei.com \
    --to=tanhuazhong@huawei.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=linyunsheng@huawei.com \
    --cc=lipeng321@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=salil.mehta@huawei.com \
    --cc=yisen.zhuang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®