From: Julien Thierry <julien.thierry@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, daniel.thompson@linaro.org,
joel@joelfernandes.org, marc.zyngier@arm.com,
christoffer.dall@arm.com, james.morse@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
mark.rutland@arm.com, Julien Thierry <julien.thierry@arm.com>,
kvmarm@lists.cs.columbia.edu
Subject: [PATCH v9 10/26] arm64: kvm: Unmask PMR before entering guest
Date: Mon, 21 Jan 2019 15:33:29 +0000 [thread overview]
Message-ID: <1548084825-8803-11-git-send-email-julien.thierry@arm.com> (raw)
In-Reply-To: <1548084825-8803-1-git-send-email-julien.thierry@arm.com>
Interrupts masked by ICC_PMR_EL1 will not be signaled to the CPU. This
means that hypervisor will not receive masked interrupts while running a
guest.
Avoid this by making sure ICC_PMR_EL1 is unmasked when we enter a guest.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
arch/arm64/include/asm/kvm_host.h | 12 ++++++++++++
arch/arm64/kvm/hyp/switch.c | 16 ++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 7732d0b..a1f9f55 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -24,6 +24,7 @@
#include <linux/types.h>
#include <linux/kvm_types.h>
+#include <asm/arch_gicv3.h>
#include <asm/cpufeature.h>
#include <asm/daifflags.h>
#include <asm/fpsimd.h>
@@ -474,6 +475,17 @@ static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
static inline void kvm_arm_vhe_guest_enter(void)
{
local_daif_mask();
+
+ /*
+ * Having IRQs masked via PMR when entering the guest means the GIC
+ * will not signal the CPU of interrupts of lower priority, and the
+ * only way to get out will be via guest exceptions.
+ * Naturally, we want to avoid this.
+ */
+ if (system_uses_irq_prio_masking()) {
+ gic_write_pmr(GIC_PRIO_IRQON);
+ dsb(sy);
+ }
}
static inline void kvm_arm_vhe_guest_exit(void)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index b0b1478..6a4c2d6 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -22,6 +22,7 @@
#include <kvm/arm_psci.h>
+#include <asm/arch_gicv3.h>
#include <asm/cpufeature.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_emulate.h>
@@ -521,6 +522,17 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
struct kvm_cpu_context *guest_ctxt;
u64 exit_code;
+ /*
+ * Having IRQs masked via PMR when entering the guest means the GIC
+ * will not signal the CPU of interrupts of lower priority, and the
+ * only way to get out will be via guest exceptions.
+ * Naturally, we want to avoid this.
+ */
+ if (system_uses_irq_prio_masking()) {
+ gic_write_pmr(GIC_PRIO_IRQON);
+ dsb(sy);
+ }
+
vcpu = kern_hyp_va(vcpu);
host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
@@ -573,6 +585,10 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
*/
__debug_switch_to_host(vcpu);
+ /* Returning to host will clear PSR.I, remask PMR if needed */
+ if (system_uses_irq_prio_masking())
+ gic_write_pmr(GIC_PRIO_IRQOFF);
+
return exit_code;
}
--
1.9.1
next prev parent reply other threads:[~2019-01-21 15:34 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-21 15:33 [PATCH v9 00/26] arm64: provide pseudo NMI with GICv3 Julien Thierry
2019-01-21 15:33 ` [PATCH v9 01/26] arm64: Fix HCR.TGE status for NMI contexts Julien Thierry
2019-01-28 11:48 ` James Morse
2019-01-28 15:42 ` Julien Thierry
2019-01-31 8:19 ` Christoffer Dall
2019-01-31 8:56 ` Julien Thierry
2019-01-31 9:27 ` Christoffer Dall
2019-01-31 9:40 ` Julien Thierry
2019-01-31 9:48 ` Christoffer Dall
2019-01-31 9:53 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 02/26] arm64: Remove unused daif related functions/macros Julien Thierry
2019-01-28 9:21 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 03/26] arm64: cpufeature: Set SYSREG_GIC_CPUIF as a boot system feature Julien Thierry
2019-01-28 9:22 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 04/26] arm64: cpufeature: Add cpufeature for IRQ priority masking Julien Thierry
2019-01-28 9:24 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 05/26] arm/arm64: gic-v3: Add PMR and RPR accessors Julien Thierry
2019-01-28 9:25 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 06/26] irqchip/gic-v3: Switch to PMR masking before calling IRQ handler Julien Thierry
2019-01-28 9:30 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 07/26] arm64: ptrace: Provide definitions for PMR values Julien Thierry
2019-01-28 9:37 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 08/26] arm64: Make PMR part of task context Julien Thierry
2019-01-28 9:42 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 09/26] arm64: Unmask PMR before going idle Julien Thierry
2019-01-22 15:23 ` Catalin Marinas
2019-01-22 20:18 ` Ard Biesheuvel
2019-01-23 8:56 ` Julien Thierry
2019-01-23 9:38 ` Ard Biesheuvel
2019-01-28 9:44 ` Marc Zyngier
2019-01-21 15:33 ` Julien Thierry [this message]
2019-01-28 9:58 ` [PATCH v9 10/26] arm64: kvm: Unmask PMR before entering guest Marc Zyngier
2019-01-30 12:07 ` Christoffer Dall
2019-01-30 14:58 ` Julien Thierry
2019-01-21 15:33 ` [PATCH v9 11/26] efi: Let architectures decide the flags that should be saved/restored Julien Thierry
2019-01-21 15:42 ` Ard Biesheuvel
2019-01-23 9:04 ` Julien Thierry
2019-01-28 10:00 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 12/26] arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking Julien Thierry
2019-01-21 15:45 ` Ard Biesheuvel
2019-01-21 18:05 ` Julien Thierry
2019-01-22 15:21 ` Catalin Marinas
2019-01-23 10:44 ` Julien Thierry
2019-01-30 11:52 ` Julien Thierry
2019-01-21 15:33 ` [PATCH v9 13/26] arm64: daifflags: Include PMR in daifflags restore operations Julien Thierry
2019-01-28 10:37 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 14/26] arm64: alternative: Allow alternative status checking per cpufeature Julien Thierry
2019-01-28 11:00 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 15/26] arm64: alternative: Apply alternatives early in boot process Julien Thierry
2019-01-28 11:17 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 16/26] irqchip/gic-v3: Factor group0 detection into functions Julien Thierry
2019-01-28 11:19 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 17/26] arm64: Switch to PMR masking when starting CPUs Julien Thierry
2019-01-28 11:21 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 18/26] arm64: gic-v3: Implement arch support for priority masking Julien Thierry
2019-01-28 11:23 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 19/26] irqchip/gic-v3: Detect if GIC can support pseudo-NMIs Julien Thierry
2019-01-28 11:39 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 20/26] irqchip/gic-v3: Handle pseudo-NMIs Julien Thierry
2019-01-28 11:59 ` Marc Zyngier
2019-01-29 11:33 ` Julien Thierry
2019-01-29 12:31 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 21/26] irqchip/gic: Add functions to access irq priorities Julien Thierry
2019-01-28 12:04 ` Marc Zyngier
2019-01-29 11:36 ` Julien Thierry
2019-01-21 15:33 ` [PATCH v9 22/26] irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI Julien Thierry
2019-01-26 10:19 ` liwei (GF)
2019-01-26 10:41 ` Marc Zyngier
2019-01-28 8:57 ` Julien Thierry
2019-01-28 13:59 ` liwei (GF)
2019-01-28 14:49 ` Julien Thierry
2019-01-28 12:08 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 23/26] arm64: Handle serror in NMI context Julien Thierry
2019-01-28 12:26 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 24/26] arm64: Skip preemption when exiting an NMI Julien Thierry
2019-01-28 12:34 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 25/26] arm64: Skip irqflags tracing for NMI in IRQs disabled context Julien Thierry
2019-01-28 12:40 ` Marc Zyngier
2019-01-21 15:33 ` [PATCH v9 26/26] arm64: Enable the support of pseudo-NMIs Julien Thierry
2019-01-28 12:47 ` Marc Zyngier
2019-01-30 13:46 ` Julien Thierry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548084825-8803-11-git-send-email-julien.thierry@arm.com \
--to=julien.thierry@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=daniel.thompson@linaro.org \
--cc=james.morse@arm.com \
--cc=joel@joelfernandes.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®