From: Stefan Popa <stefan.popa@analog.com>
To: <jic23@kernel.org>, <robh+dt@kernel.org>
Cc: Stefan Popa <stefan.popa@analog.com>,
<Michael.Hennerich@analog.com>, <knaack.h@gmx.de>,
<lars@metafoo.de>, <pmeerw@pmeerw.net>,
<gregkh@linuxfoundation.org>, <linux-kernel@vger.kernel.org>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v2 4/5] iio: imu: adis16480: Add support for ADIS1649x family of devices
Date: Thu, 21 Feb 2019 15:15:05 +0200 [thread overview]
Message-ID: <1550754906-24640-5-git-send-email-stefan.popa@analog.com> (raw)
In-Reply-To: <1550754906-24640-1-git-send-email-stefan.popa@analog.com>
The ADIS16495 and ADIS16497 are inertial systems that include a triaxis
gyroscope and a triaxis accelerometer. The serial peripheral interface
(SPI) provide a simple interface for data collection and configuration
control. The devices are similar to ADIS16475, ADIS16480, ADIS16485 and
ADIS16488, the main differences are related to range and scale factors.
The temperature data scale is 0.00565 C/LSB for ADIS16475 and ADIS1648x
devices, while for ADIS1649x 0.0125 C/LSB.
Another difference is that ADIS1649x devices support different gyroscope
measurement ranges which are dependent on the dash number (-1, -2, -3),
see Table 24 in the ADIS16495 datasheet. However, the ADIS16497
gyroscopes have the same scale as ADIS16495.
Furthermore, ADIS16495 devices support the acceleration maximum range of
8g, while ADIS16497 devices go up to 40g.
Datasheets:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16495.pdf
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16497.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
---
drivers/iio/imu/adis16480.c | 72 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index 5a2864a..313936c 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -710,6 +710,12 @@ enum adis16480_variant {
ADIS16480,
ADIS16485,
ADIS16488,
+ ADIS16495_1,
+ ADIS16495_2,
+ ADIS16495_3,
+ ADIS16497_1,
+ ADIS16497_2,
+ ADIS16497_3,
};
static const struct adis16480_chip_info adis16480_chip_info[] = {
@@ -754,6 +760,60 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.accel_max_scale = 18,
.temp_scale = 5650, /* 5.65 milli degree Celsius */
},
+ [ADIS16495_1] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(20000),
+ .gyro_max_scale = 125,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 8,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ },
+ [ADIS16495_2] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(18000),
+ .gyro_max_scale = 450,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 8,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ },
+ [ADIS16495_3] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(20000),
+ .gyro_max_scale = 2000,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 8,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ },
+ [ADIS16497_1] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(20000),
+ .gyro_max_scale = 125,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 40,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ },
+ [ADIS16497_2] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(18000),
+ .gyro_max_scale = 450,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 40,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ },
+ [ADIS16497_3] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(20000),
+ .gyro_max_scale = 2000,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 40,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ },
};
static const struct iio_info adis16480_info = {
@@ -999,6 +1059,12 @@ static const struct spi_device_id adis16480_ids[] = {
{ "adis16480", ADIS16480 },
{ "adis16485", ADIS16485 },
{ "adis16488", ADIS16488 },
+ { "adis16495-1", ADIS16495_1 },
+ { "adis16495-2", ADIS16495_2 },
+ { "adis16495-3", ADIS16495_3 },
+ { "adis16497-1", ADIS16497_1 },
+ { "adis16497-2", ADIS16497_2 },
+ { "adis16497-3", ADIS16497_3 },
{ }
};
MODULE_DEVICE_TABLE(spi, adis16480_ids);
@@ -1008,6 +1074,12 @@ static const struct of_device_id adis16480_of_match[] = {
{ .compatible = "adi,adis16480" },
{ .compatible = "adi,adis16485" },
{ .compatible = "adi,adis16488" },
+ { .compatible = "adi,adis16495-1" },
+ { .compatible = "adi,adis16495-2" },
+ { .compatible = "adi,adis16495-3" },
+ { .compatible = "adi,adis16497-1" },
+ { .compatible = "adi,adis16497-2" },
+ { .compatible = "adi,adis16497-3" },
{ },
};
MODULE_DEVICE_TABLE(of, adis16480_of_match);
--
2.7.4
next prev parent reply other threads:[~2019-02-21 13:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-21 13:15 [PATCH v2 0/5] " Stefan Popa
2019-02-21 13:15 ` [PATCH v2 1/5] iio: imu: adis16480: Add support for configurable drdy indicator Stefan Popa
2019-02-21 13:15 ` [PATCH v2 2/5] iio: imu: adis16480: Add OF device ID table Stefan Popa
2019-02-21 13:15 ` [PATCH v2 3/5] iio: imu: adis16480: Treat temperature scale in a generic way Stefan Popa
2019-02-21 13:15 ` Stefan Popa [this message]
2019-02-21 13:15 ` [PATCH v2 5/5] iio: imu: adis16480: Add docs for ADIS16480 IMU Stefan Popa
2019-02-22 22:56 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550754906-24640-5-git-send-email-stefan.popa@analog.com \
--to=stefan.popa@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®