From: <Claudiu.Beznea@microchip.com>
To: <lee.jones@linaro.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <Nicolas.Ferre@microchip.com>,
<alexandre.belloni@bootlin.com>,
<Ludovic.Desroches@microchip.com>, <bbrezillon@kernel.org>,
<airlied@linux.ie>, <daniel@ffwll.ch>, <thierry.reding@gmail.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
<linux-pwm@vger.kernel.org>, <Sandeep.Sheriker@microchip.com>,
<Claudiu.Beznea@microchip.com>
Subject: [PATCH v2 6/7] drm: atmel-hlcdc: enable sys_clk during initalization.
Date: Tue, 5 Mar 2019 10:08:06 +0000 [thread overview]
Message-ID: <1551780434-4580-7-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1551780434-4580-1-git-send-email-claudiu.beznea@microchip.com>
From: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
For SAM9X60 SoC, sys_clk is through lcd_gclk clock source and this
needs to be enabled before enabling lcd_clk.
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[claudiu.beznea@microchip.com: add fixed_clksrc checks]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 0be13eceedba..8bf51f853721 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -625,10 +625,18 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
dc->hlcdc = dev_get_drvdata(dev->dev->parent);
dev->dev_private = dc;
+ if (dc->desc->fixed_clksrc) {
+ ret = clk_prepare_enable(dc->hlcdc->sys_clk);
+ if (ret) {
+ dev_err(dev->dev, "failed to enable sys_clk\n");
+ goto err_destroy_wq;
+ }
+ }
+
ret = clk_prepare_enable(dc->hlcdc->periph_clk);
if (ret) {
dev_err(dev->dev, "failed to enable periph_clk\n");
- goto err_destroy_wq;
+ goto err_sys_clk_disable;
}
pm_runtime_enable(dev->dev);
@@ -664,6 +672,9 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
err_periph_clk_disable:
pm_runtime_disable(dev->dev);
clk_disable_unprepare(dc->hlcdc->periph_clk);
+err_sys_clk_disable:
+ if (dc->desc->fixed_clksrc)
+ clk_disable_unprepare(dc->hlcdc->sys_clk);
err_destroy_wq:
destroy_workqueue(dc->wq);
@@ -688,6 +699,8 @@ static void atmel_hlcdc_dc_unload(struct drm_device *dev)
pm_runtime_disable(dev->dev);
clk_disable_unprepare(dc->hlcdc->periph_clk);
+ if (dc->desc->fixed_clksrc)
+ clk_disable_unprepare(dc->hlcdc->sys_clk);
destroy_workqueue(dc->wq);
}
@@ -805,6 +818,8 @@ static int atmel_hlcdc_dc_drm_suspend(struct device *dev)
regmap_read(regmap, ATMEL_HLCDC_IMR, &dc->suspend.imr);
regmap_write(regmap, ATMEL_HLCDC_IDR, dc->suspend.imr);
clk_disable_unprepare(dc->hlcdc->periph_clk);
+ if (dc->desc->fixed_clksrc)
+ clk_disable_unprepare(dc->hlcdc->sys_clk);
return 0;
}
@@ -814,6 +829,8 @@ static int atmel_hlcdc_dc_drm_resume(struct device *dev)
struct drm_device *drm_dev = dev_get_drvdata(dev);
struct atmel_hlcdc_dc *dc = drm_dev->dev_private;
+ if (dc->desc->fixed_clksrc)
+ clk_prepare_enable(dc->hlcdc->sys_clk);
clk_prepare_enable(dc->hlcdc->periph_clk);
regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, dc->suspend.imr);
--
2.7.4
next prev parent reply other threads:[~2019-03-05 10:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-05 10:07 [PATCH v2 0/7] add LCD support for SAM9X60 Claudiu.Beznea
2019-03-05 10:07 ` [PATCH v2 1/7] drm: atmel-hlcdc: add config option for clock selection Claudiu.Beznea
2019-03-05 10:07 ` [PATCH v2 2/7] drm: atmel-hlcdc: avoid initializing cfg with zero Claudiu.Beznea
2019-03-05 10:07 ` [PATCH v2 3/7] dt-bindings: mfd: add bindings for SAM9X60 HLCD controller Claudiu.Beznea
2019-03-12 18:44 ` Rob Herring
2019-04-02 4:17 ` Lee Jones
2019-03-05 10:07 ` [PATCH v2 4/7] mfd: atmel-hlcdc: add compatible " Claudiu.Beznea
2019-04-02 4:17 ` Lee Jones
2019-03-05 10:07 ` [PATCH v2 5/7] pwm: atmel-hlcdc: add compatible for SAM9X60 HLCDC's PWM Claudiu.Beznea
2019-04-24 8:12 ` Claudiu.Beznea
2019-04-25 8:31 ` Lee Jones
2019-03-05 10:08 ` Claudiu.Beznea [this message]
2019-03-05 10:08 ` [PATCH v2 7/7] drm: atmel-hlcdc: add sam9x60 LCD controller Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551780434-4580-7-git-send-email-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=Sandeep.Sheriker@microchip.com \
--cc=airlied@linux.ie \
--cc=alexandre.belloni@bootlin.com \
--cc=bbrezillon@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®