From: "Yannick Fertré" <yannick.fertre@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>,
Vincent Abriou <vincent.abriou@st.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Rob Herring <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v1 4/5] ARM: dts: stm32: move fixe regulators reg11 & reg18
Date: Wed, 3 Apr 2019 10:16:28 +0200 [thread overview]
Message-ID: <1554279389-27377-5-git-send-email-yannick.fertre@st.com> (raw)
In-Reply-To: <1554279389-27377-1-git-send-email-yannick.fertre@st.com>
Move regulators reg11 & reg18 from device-tree files stm32mp157c-ed1.dts
& stm32mp157c-dk2.dts to file stm32mp157c.dtsi.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
arch/arm/boot/dts/stm32mp157c-dk2.dts | 8 --------
arch/arm/boot/dts/stm32mp157c-ed1.dts | 16 ----------------
arch/arm/boot/dts/stm32mp157c.dtsi | 16 ++++++++++++++++
3 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 363aeb9..9a81d2d 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -11,14 +11,6 @@
/ {
model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
-
- reg18: reg18 {
- compatible = "regulator-fixed";
- regulator-name = "reg18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
};
&dsi {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 9fd7943..3748e66 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -26,22 +26,6 @@
serial0 = &uart4;
};
- reg11: reg11 {
- compatible = "regulator-fixed";
- regulator-name = "reg11";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- reg18: reg18 {
- compatible = "regulator-fixed";
- regulator-name = "reg18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
vdd_sd: regulator-vdd_sd {
compatible = "regulator-fixed";
regulator-name = "vdd_sd";
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 4611b57..0dec4e5 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -11,6 +11,22 @@
#address-cells = <1>;
#size-cells = <1>;
+ reg11: reg11 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ reg18: reg18 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
next prev parent reply other threads:[~2019-04-03 8:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-03 8:16 [PATCH v1 0/5] Add supply property for DSI controller Yannick Fertré
2019-04-03 8:16 ` [PATCH v1 1/5] dt-bindings: display: stm32: add supply property to " Yannick Fertré
2019-04-05 16:33 ` Philippe CORNU
2019-04-06 6:06 ` Rob Herring
2019-04-03 8:16 ` [PATCH v1 2/5] drm/stm: dw_mipi_dsi-stm: add support of an optional regulator Yannick Fertré
2019-04-05 16:34 ` Philippe CORNU
2019-04-03 8:16 ` [PATCH v1 3/5] ARM: dts: stm32: add phy-dsi-supply property on stm32mp157c Yannick Fertré
2019-04-03 8:16 ` Yannick Fertré [this message]
2019-04-03 8:16 ` [PATCH v1 5/5] ARM: dts: stm32: remove phy-dsi-supply property on stm32mp157c-dk2 board Yannick Fertré
2019-04-10 13:48 ` [PATCH v1 0/5] Add supply property for DSI controller Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1554279389-27377-5-git-send-email-yannick.fertre@st.com \
--to=yannick.fertre@st.com \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@st.com \
--cc=benjamin.gaignard@st.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=philippe.cornu@st.com \
--cc=robh+dt@kernel.org \
--cc=vincent.abriou@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®