From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linuxarm@huawei.com>, <linux-kernel@vger.kernel.org>,
<linux-scsi@vger.kernel.org>, John Garry <john.garry@huawei.com>
Subject: [PATCH 3/9] scsi: hisi_sas: Fix for setting the PHY linkrate when disconnected
Date: Thu, 11 Apr 2019 20:46:38 +0800 [thread overview]
Message-ID: <1554986804-233706-4-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1554986804-233706-1-git-send-email-john.garry@huawei.com>
In commit efdcad62e7b8 ("scsi: hisi_sas: Set PHY linkrate when
disconnected"), we use the sas_phy_data.enable flag to track whether
the PHY was enabled or not, so that we know if we should set the
PHY negotiated linkrate at SAS_LINK_RATE_UNKNOWN or SAS_PHY_DISABLED.
However, it is not proper to use sas_phy_data.enable, since it is
only set when libsas attempts to set the PHY disabled/enabled; hence,
it may not even have an initial value.
As a solution to this problem, introduce hisi_sas_phy.enable to track
whether the PHY is enabled or not, so that we can set the negotiated
linkrate properly when the PHY comes down.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 3 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 43 ++++++++++++++++++++------
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 11 ++-----
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 6 ++--
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 6 ++--
5 files changed, 46 insertions(+), 23 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 9bfa9f12d81e..fc87994b5d73 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -170,6 +170,7 @@ struct hisi_sas_phy {
u32 code_violation_err_count;
enum sas_linkrate minimum_linkrate;
enum sas_linkrate maximum_linkrate;
+ int enable;
};
struct hisi_sas_port {
@@ -551,6 +552,8 @@ extern int hisi_sas_slave_configure(struct scsi_device *sdev);
extern int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time);
extern void hisi_sas_scan_start(struct Scsi_Host *shost);
extern int hisi_sas_host_reset(struct Scsi_Host *shost, int reset_type);
+extern void hisi_sas_phy_enable(struct hisi_hba *hisi_hba, int phy_no,
+ int enable);
extern void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy);
extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
struct sas_task *task,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index e7401e2bea27..d4da537f9a45 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -10,7 +10,6 @@
*/
#include "hisi_sas.h"
-#include "../libsas/sas_internal.h"
#define DRV_NAME "hisi_sas"
#define DEV_IS_GONE(dev) \
@@ -171,7 +170,7 @@ void hisi_sas_stop_phys(struct hisi_hba *hisi_hba)
int phy_no;
for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++)
- hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 0);
}
EXPORT_SYMBOL_GPL(hisi_sas_stop_phys);
@@ -976,6 +975,30 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
timer_setup(&phy->timer, hisi_sas_wait_phyup_timedout, 0);
}
+/* Wrapper to ensure we track hisi_sas_phy.enable properly */
+void hisi_sas_phy_enable(struct hisi_hba *hisi_hba, int phy_no, int enable)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *aphy = &phy->sas_phy;
+ struct sas_phy *sphy = aphy->phy;
+ unsigned long flags;
+
+ spin_lock_irqsave(&phy->lock, flags);
+
+ if (enable) {
+ /* We may have been enabled already; if so, don't touch */
+ if (!phy->enable)
+ sphy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+ hisi_hba->hw->phy_start(hisi_hba, phy_no);
+ } else {
+ sphy->negotiated_linkrate = SAS_PHY_DISABLED;
+ hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ }
+ phy->enable = enable;
+ spin_unlock_irqrestore(&phy->lock, flags);
+}
+EXPORT_SYMBOL_GPL(hisi_sas_phy_enable);
+
static void hisi_sas_port_notify_formed(struct asd_sas_phy *sas_phy)
{
struct sas_ha_struct *sas_ha = sas_phy->ha;
@@ -1112,10 +1135,10 @@ static int hisi_sas_phy_set_linkrate(struct hisi_hba *hisi_hba, int phy_no,
sas_phy->phy->maximum_linkrate = max;
sas_phy->phy->minimum_linkrate = min;
- hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 0);
msleep(100);
hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, &_r);
- hisi_hba->hw->phy_start(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 1);
return 0;
}
@@ -1133,13 +1156,13 @@ static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
break;
case PHY_FUNC_LINK_RESET:
- hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 0);
msleep(100);
- hisi_hba->hw->phy_start(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 1);
break;
case PHY_FUNC_DISABLE:
- hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 0);
break;
case PHY_FUNC_SET_LINK_RATE:
@@ -2172,16 +2195,18 @@ static void hisi_sas_phy_disconnected(struct hisi_sas_phy *phy)
{
struct asd_sas_phy *sas_phy = &phy->sas_phy;
struct sas_phy *sphy = sas_phy->phy;
- struct sas_phy_data *d = sphy->hostdata;
+ unsigned long flags;
phy->phy_attached = 0;
phy->phy_type = 0;
phy->port = NULL;
- if (d->enable)
+ spin_lock_irqsave(&phy->lock, flags);
+ if (phy->enable)
sphy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
else
sphy->negotiated_linkrate = SAS_PHY_DISABLED;
+ spin_unlock_irqrestore(&phy->lock, flags);
}
void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 078ddd3871f2..717972283acf 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -798,16 +798,11 @@ static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
enable_phy_v1_hw(hisi_hba, phy_no);
}
-static void stop_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
-{
- disable_phy_v1_hw(hisi_hba, phy_no);
-}
-
static void phy_hard_reset_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
{
- stop_phy_v1_hw(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 0);
msleep(100);
- start_phy_v1_hw(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 1);
}
static void start_phys_v1_hw(struct timer_list *t)
@@ -817,7 +812,7 @@ static void start_phys_v1_hw(struct timer_list *t)
for (i = 0; i < hisi_hba->n_phy; i++) {
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x12a);
- start_phy_v1_hw(hisi_hba, i);
+ hisi_sas_phy_enable(hisi_hba, i, 1);
}
}
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 33b72c7f72c5..3696cfe48574 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1546,14 +1546,14 @@ static void phy_hard_reset_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
u32 txid_auto;
- disable_phy_v2_hw(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 0);
if (phy->identify.device_type == SAS_END_DEVICE) {
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
txid_auto | TX_HARDRST_MSK);
}
msleep(100);
- start_phy_v2_hw(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 1);
}
static void phy_get_events_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
@@ -1586,7 +1586,7 @@ static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
if (!sas_phy->phy->enabled)
continue;
- start_phy_v2_hw(hisi_hba, i);
+ hisi_sas_phy_enable(hisi_hba, i, 1);
}
}
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index e8323d038d53..3b33816ea6e6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -856,14 +856,14 @@ static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
u32 txid_auto;
- disable_phy_v3_hw(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 0);
if (phy->identify.device_type == SAS_END_DEVICE) {
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
txid_auto | TX_HARDRST_MSK);
}
msleep(100);
- start_phy_v3_hw(hisi_hba, phy_no);
+ hisi_sas_phy_enable(hisi_hba, phy_no, 1);
}
static enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
@@ -882,7 +882,7 @@ static void phys_init_v3_hw(struct hisi_hba *hisi_hba)
if (!sas_phy->phy->enabled)
continue;
- start_phy_v3_hw(hisi_hba, i);
+ hisi_sas_phy_enable(hisi_hba, i, 1);
}
}
--
2.17.1
next prev parent reply other threads:[~2019-04-11 12:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-11 12:46 [PATCH 0/9] hisi_sas: Some misc patches John Garry
2019-04-11 12:46 ` [PATCH 1/9] scsi: hisi_sas: add host reset interface for test John Garry
2019-04-11 12:46 ` [PATCH 2/9] scsi: hisi_sas: Remedy inconsistent PHY down state in software John Garry
2019-04-11 12:46 ` John Garry [this message]
2019-04-11 12:46 ` [PATCH 4/9] scsi: hisi_sas: Adjust the printk format of functions hisi_sas_init_device() John Garry
2019-04-11 12:46 ` [PATCH 5/9] scsi: hisi_sas: allocate different SAS address for directly attached situation John Garry
2019-04-11 12:46 ` [PATCH 6/9] scsi: hisi_sas: Support all RAS events with MSI interrupts John Garry
2019-04-11 12:46 ` [PATCH 7/9] scsi: hisi_sas: Don't hard reset disk during controller reset John Garry
2019-04-11 12:46 ` [PATCH 8/9] scsi: hisi_sas: Don't fail IT nexus reset for Open Reject timeout John Garry
2019-04-11 12:46 ` [PATCH 9/9] scsi: hisi_sas: Some misc tidy-up John Garry
2019-04-15 23:08 ` [PATCH 0/9] hisi_sas: Some misc patches Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1554986804-233706-4-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®