[RFC PATCH v3 net-next 11/11] ARM: dts: am57xx-idk: add dt nodes for new cpsw switch dev driver

[Grygorii Strashko <grygorii.strashko@ti.com>]

Add DT nodes for new cpsw switch dev driver.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am571x-idk.dts         | 28 +++++++++++++
 arch/arm/boot/dts/am57xx-idk-common.dtsi |  2 +-
 arch/arm/boot/dts/dra7-l4.dtsi           | 53 ++++++++++++++++++++++++
 3 files changed, 82 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 6432309b39e3..6ec02be9d80b 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -194,3 +194,31 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0_sw>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1_sw>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio_sw {
+	ethphy0_sw: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1_sw: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index f7bd26458915..5c7663699efa 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -367,7 +367,7 @@
 };
 
 &mac {
-	status = "okay";
+//	status = "okay";
 	dual_emac;
 };
 
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 414f1cd68733..c17c506b51e6 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3122,6 +3122,59 @@
 					phys = <&phy_gmii_sel 2>;
 				};
 			};
+
+			mac_sw: ethernet_switch@0 {
+				compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+				reg = <0x0 0x4000>;
+				ranges = <0 0 0x4000>;
+				clocks = <&gmac_main_clk>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cpsw_port1: port@1 {
+						reg = <1>;
+						ti,label = "port1";
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1>;
+					};
+
+					cpsw_port2: port@2 {
+						reg = <2>;
+						ti,label = "port2";
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2>;
+					};
+				};
+
+				davinci_mdio_sw: mdio@1000 {
+					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					ti,hwmods = "davinci_mdio";
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+				};
+
+				cpts {
+					clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+					clock-names = "cpts";
+				};
+			};
 		};
 	};
 };
-- 
2.17.1