From: Grygorii Strashko <grygorii.strashko@ti.com>
To: <netdev@vger.kernel.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
"David S . Miller" <davem@davemloft.net>,
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Sekhar Nori <nsekhar@ti.com>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
Murali Karicheri <m-karicheri2@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH net-next v2 11/20] net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac mode
Date: Fri, 26 Apr 2019 20:12:33 +0300 [thread overview]
Message-ID: <1556298762-8632-12-git-send-email-grygorii.strashko@ti.com> (raw)
In-Reply-To: <1556298762-8632-1-git-send-email-grygorii.strashko@ti.com>
Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood
Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port
belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is
working in non dual_mac mode, but in dual_mac - it causes
enabling/disabling ALLMULTI flag for both ports.
Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to
specify ALE port number for which ALLMULTI has to be enabled and check if
port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
changes in v2:
- dropped allmulti field from ALE context
drivers/net/ethernet/ti/cpsw.c | 12 +++++++++---
drivers/net/ethernet/ti/cpsw_ale.c | 19 ++++++++++---------
drivers/net/ethernet/ti/cpsw_ale.h | 3 +--
3 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 4a26c72be0cc..071c8aeee2ce 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -793,12 +793,17 @@ static int cpsw_purge_all_mc(struct net_device *ndev, const u8 *addr, int num)
static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
{
- struct cpsw_common *cpsw = ndev_to_cpsw(ndev);
+ struct cpsw_priv *priv = netdev_priv(ndev);
+ struct cpsw_common *cpsw = priv->cpsw;
+ int slave_port = -1;
+
+ if (cpsw->data.dual_emac)
+ slave_port = priv->emac_port + 1;
if (ndev->flags & IFF_PROMISC) {
/* Enable promiscuous mode */
cpsw_set_promiscious(ndev, true);
- cpsw_ale_set_allmulti(cpsw->ale, IFF_ALLMULTI);
+ cpsw_ale_set_allmulti(cpsw->ale, IFF_ALLMULTI, slave_port);
return;
} else {
/* Disable promiscuous mode */
@@ -806,7 +811,8 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
}
/* Restore allmulti on vlans if necessary */
- cpsw_ale_set_allmulti(cpsw->ale, ndev->flags & IFF_ALLMULTI);
+ cpsw_ale_set_allmulti(cpsw->ale,
+ ndev->flags & IFF_ALLMULTI, slave_port);
/* add/remove mcast address either for real netdev or for vlan */
__hw_addr_ref_sync_dev(&ndev->mc, ndev, cpsw_add_mc_addr,
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 67dc769441ce..f77b5884c8db 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -468,24 +468,25 @@ int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port_mask)
return 0;
}
-void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti)
+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port)
{
u32 ale_entry[ALE_ENTRY_WORDS];
- int type, idx;
int unreg_mcast = 0;
-
- /* Only bother doing the work if the setting is actually changing */
- if (ale->allmulti == allmulti)
- return;
-
- /* Remember the new setting to check against next time */
- ale->allmulti = allmulti;
+ int type, idx;
for (idx = 0; idx < ale->params.ale_entries; idx++) {
+ int vlan_members;
+
cpsw_ale_read(ale, idx, ale_entry);
type = cpsw_ale_get_entry_type(ale_entry);
if (type != ALE_TYPE_VLAN)
continue;
+ vlan_members =
+ cpsw_ale_get_vlan_member_list(ale_entry,
+ ale->vlan_field_bits);
+
+ if (port != -1 && !(vlan_members & BIT(port)))
+ continue;
unreg_mcast =
cpsw_ale_get_vlan_unreg_mcast(ale_entry,
diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h
index 4777d626fac8..370df254eb12 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.h
+++ b/drivers/net/ethernet/ti/cpsw_ale.h
@@ -30,7 +30,6 @@ struct cpsw_ale {
struct cpsw_ale_params params;
struct timer_list timer;
unsigned long ageout;
- int allmulti;
u32 version;
/* These bits are different on NetCP NU Switch ALE */
u32 port_mask_bits;
@@ -109,7 +108,7 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, const u8 *addr, int port_mask,
int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
int reg_mcast, int unreg_mcast);
int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port);
-void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti);
+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port);
int cpsw_ale_control_get(struct cpsw_ale *ale, int port, int control);
int cpsw_ale_control_set(struct cpsw_ale *ale, int port,
--
2.17.1
next prev parent reply other threads:[~2019-04-26 17:13 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-26 17:12 [PATCH net-next v2 00/20] net: ethernet: ti: clean up and optimizations Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 01/20] net: ethernet: ti: convert to SPDX license identifiers Grygorii Strashko
2019-04-26 22:04 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 02/20] net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config option Grygorii Strashko
2019-04-26 22:06 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 03/20] net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE " Grygorii Strashko
2019-04-26 22:08 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 04/20] net: ethernet: ti: cpsw: update cpsw_split_res() to accept cpsw_common Grygorii Strashko
2019-04-26 22:09 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 05/20] net: ethernet: ti: cpsw: use local var dev in probe Grygorii Strashko
2019-04-26 22:10 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 06/20] net: ethernet: ti: cpsw: drop pinctrl_pm_select_default_state call Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 07/20] net: ethernet: ti: cpsw: use devm_alloc_etherdev_mqs() Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 08/20] net: ethernet: ti: cpsw: drop cpsw_tx_packet_submit() Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 09/20] net: ethernet: ti: ale: fix mcast super setting Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 10/20] net: ethernet: ti: ale: use define for host port in cpsw_ale_set_allmulti() Grygorii Strashko
2019-04-26 17:12 ` Grygorii Strashko [this message]
2019-04-26 17:12 ` [PATCH net-next v2 12/20] net: ethernet: ti: ale: do not auto delete mcast super entries Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 13/20] net: ethernet: ti: davinci_mdio: use devm_ioremap() Grygorii Strashko
2019-04-26 22:12 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 14/20] net: ethernet: ti: cpsw: refactor probe to group common hw initialization Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 15/20] net: ethernet: ti: cpsw: move cpsw definitions in priv header Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 16/20] net: ethernet: ti: davinci_cpdma: use dma_addr_t for desc_mem_phys and desc_hw_addr Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 17/20] net: ethernet: ti: cpsw: move common hw init code in separate func Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 18/20] net: ethernet: ti: cpsw: introduce mac sl module api Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 19/20] net: ethernet: ti: cpsw: switch to use mac sl api Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 20/20] net: ethernet: ti: cpsw: move ethtool func in separate file Grygorii Strashko
2019-04-26 22:16 ` Andrew Lunn
2019-04-26 21:20 ` [PATCH net-next v2 00/20] net: ethernet: ti: clean up and optimizations Jakub Kicinski
2019-04-27 21:12 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1556298762-8632-12-git-send-email-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=ivan.khoronzhuk@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=m-karicheri2@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®