mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wanpeng Li <kernellwp@gmail.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>,
	"Sean Christopherson" <sean.j.christopherson@intel.com>,
	"Liran Alon" <liran.alon@oracle.com>
Subject: [PATCH v2 4/4] KVM: LAPIC: Optimize timer latency further
Date: Wed, 15 May 2019 12:11:54 +0800	[thread overview]
Message-ID: <1557893514-5815-5-git-send-email-wanpengli@tencent.com> (raw)
In-Reply-To: <1557893514-5815-1-git-send-email-wanpengli@tencent.com>

From: Wanpeng Li <wanpengli@tencent.com>

Advance lapic timer tries to hidden the hypervisor overhead between the 
host emulated timer fires and the guest awares the timer is fired. However, 
it just hidden the time between apic_timer_fn/handle_preemption_timer -> 
wait_lapic_expire, instead of the real position of vmentry which is 
mentioned in the orignial commit d0659d946be0 ("KVM: x86: add option to 
advance tscdeadline hrtimer expiration"). There is 700+ cpu cycles between 
the end of wait_lapic_expire and before world switch on my haswell desktop, 
it will be 2400+ cycles if vmentry_l1d_flush is tuned to always. 

This patch tries to narrow the last gap(wait_lapic_expire -> world switch), 
it takes the real overhead time between apic_timer_fn/handle_preemption_timer
and before world switch into consideration when adaptively tuning timer 
advancement. The patch can reduce 40% latency (~1600+ cycles to ~1000+ cycles 
on a haswell desktop) for kvm-unit-tests/tscdeadline_latency when testing 
busy waits.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
---
 arch/x86/kvm/lapic.c   | 3 ++-
 arch/x86/kvm/lapic.h   | 2 +-
 arch/x86/kvm/svm.c     | 4 ++++
 arch/x86/kvm/vmx/vmx.c | 4 ++++
 arch/x86/kvm/x86.c     | 3 ---
 5 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index af38ece..63513de 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1531,7 +1531,7 @@ static inline void adaptive_tune_timer_advancement(struct kvm_vcpu *vcpu,
 	apic->lapic_timer.timer_advance_ns = timer_advance_ns;
 }
 
-void wait_lapic_expire(struct kvm_vcpu *vcpu)
+void kvm_wait_lapic_expire(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	u64 guest_tsc, tsc_deadline;
@@ -1553,6 +1553,7 @@ void wait_lapic_expire(struct kvm_vcpu *vcpu)
 	if (unlikely(!apic->lapic_timer.timer_advance_adjust_done))
 		adaptive_tune_timer_advancement(vcpu, apic->lapic_timer.advance_expire_delta);
 }
+EXPORT_SYMBOL_GPL(kvm_wait_lapic_expire);
 
 static void start_sw_tscdeadline(struct kvm_lapic *apic)
 {
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 3e72a25..f974a3d 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -220,7 +220,7 @@ static inline int kvm_lapic_latched_init(struct kvm_vcpu *vcpu)
 
 bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector);
 
-void wait_lapic_expire(struct kvm_vcpu *vcpu);
+void kvm_wait_lapic_expire(struct kvm_vcpu *vcpu);
 
 bool kvm_intr_is_single_vcpu_fast(struct kvm *kvm, struct kvm_lapic_irq *irq,
 			struct kvm_vcpu **dest_vcpu);
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 406b558..740fb3f 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -5646,6 +5646,10 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	 */
 	x86_spec_ctrl_set_guest(svm->spec_ctrl, svm->virt_spec_ctrl);
 
+	if (lapic_in_kernel(vcpu) &&
+		vcpu->arch.apic->lapic_timer.timer_advance_ns)
+		kvm_wait_lapic_expire(vcpu);
+
 	local_irq_enable();
 
 	asm volatile (
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 9663d41..1c49946 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6437,6 +6437,10 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.cr2 != read_cr2())
 		write_cr2(vcpu->arch.cr2);
 
+	if (lapic_in_kernel(vcpu) &&
+		vcpu->arch.apic->lapic_timer.timer_advance_ns)
+		kvm_wait_lapic_expire(vcpu);
+
 	vmx->fail = __vmx_vcpu_run(vmx, (unsigned long *)&vcpu->arch.regs,
 				   vmx->loaded_vmcs->launched);
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1d89cb9..0eb9549 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7894,9 +7894,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	}
 
 	trace_kvm_entry(vcpu->vcpu_id);
-	if (lapic_in_kernel(vcpu) &&
-	    vcpu->arch.apic->lapic_timer.timer_advance_ns)
-		wait_lapic_expire(vcpu);
 	guest_enter_irqoff();
 
 	fpregs_assert_state_consistent();
-- 
2.7.4


  parent reply	other threads:[~2019-05-15  4:12 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15  4:11 [PATCH v2 0/4] " Wanpeng Li
2019-05-15  4:11 ` [PATCH v2 1/4] KVM: LAPIC: Extract adaptive tune timer advancement logic Wanpeng Li
2019-05-15  4:11 ` [PATCH v2 2/4] KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow Wanpeng Li
2019-05-15  4:11 ` [PATCH v2 3/4] KVM: LAPIC: Expose per-vCPU timer adavance information to userspace Wanpeng Li
2019-05-15 17:21   ` Sean Christopherson
2019-05-16  3:15     ` Wanpeng Li
2019-05-15  4:11 ` Wanpeng Li [this message]
2019-05-15 17:42   ` [PATCH v2 4/4] KVM: LAPIC: Optimize timer latency further Sean Christopherson
2019-05-16  3:14     ` Wanpeng Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557893514-5815-5-git-send-email-wanpengli@tencent.com \
    --to=kernellwp@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liran.alon@oracle.com \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=sean.j.christopherson@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®