From: Vincent Guittot <vincent.guittot@linaro.org>
To: mingo@redhat.com, peterz@infradead.org, linux-kernel@vger.kernel.org
Cc: Vincent Guittot <vincent.guitto@linaro.org>
Subject: [PATCH] sched/fair: clean up asym packing
Date: Mon, 3 Jun 2019 16:11:04 +0200 [thread overview]
Message-ID: <1559571064-28087-1-git-send-email-vincent.guitto@linaro.org> (raw)
Clean up asym packing to follow the default load balance behavior:
- classify the group by creating a group_asym_capacity field.
- calculate the imbalance in calculate_imbalance() instead of bypassing it.
We don't need to test twice same conditions anymore to detect asym packing
and we consolidate the calculation of imbalance in calculate_imbalance().
There is no functional changes.
Signed-off-by: Vincent Guittot <vincent.guitto@linaro.org>
---
This is a simple cleanup to gather all imbalance calculations in calculate_imbalance()
before a deeper rework of the load_balance.
kernel/sched/fair.c | 63 ++++++++++++++---------------------------------------
1 file changed, 16 insertions(+), 47 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index f35930f..93c2447 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7888,6 +7888,7 @@ struct sg_lb_stats {
unsigned int group_weight;
enum group_type group_type;
int group_no_capacity;
+ int group_asym_capacity;
unsigned long group_misfit_task_load; /* A CPU has a task too big for its capacity */
#ifdef CONFIG_NUMA_BALANCING
unsigned int nr_numa_running;
@@ -8382,9 +8383,17 @@ static bool update_sd_pick_busiest(struct lb_env *env,
* ASYM_PACKING needs to move all the work to the highest
* prority CPUs in the group, therefore mark all groups
* of lower priority than ourself as busy.
+ *
+ * This is primarily intended to used at the sibling level. Some
+ * cores like POWER7 prefer to use lower numbered SMT threads. In the
+ * case of POWER7, it can move to lower SMT modes only when higher
+ * threads are idle. When in lower SMT modes, the threads will
+ * perform better since they share less core resources. Hence when we
+ * have idle threads, we want them to be the higher ones.
*/
if (sgs->sum_nr_running &&
sched_asym_prefer(env->dst_cpu, sg->asym_prefer_cpu)) {
+ sgs->group_asym_capacity = 1;
if (!sds->busiest)
return true;
@@ -8522,51 +8531,6 @@ static inline void update_sd_lb_stats(struct lb_env *env, struct sd_lb_stats *sd
}
/**
- * check_asym_packing - Check to see if the group is packed into the
- * sched domain.
- *
- * This is primarily intended to used at the sibling level. Some
- * cores like POWER7 prefer to use lower numbered SMT threads. In the
- * case of POWER7, it can move to lower SMT modes only when higher
- * threads are idle. When in lower SMT modes, the threads will
- * perform better since they share less core resources. Hence when we
- * have idle threads, we want them to be the higher ones.
- *
- * This packing function is run on idle threads. It checks to see if
- * the busiest CPU in this domain (core in the P7 case) has a higher
- * CPU number than the packing function is being run on. Here we are
- * assuming lower CPU number will be equivalent to lower a SMT thread
- * number.
- *
- * Return: 1 when packing is required and a task should be moved to
- * this CPU. The amount of the imbalance is returned in env->imbalance.
- *
- * @env: The load balancing environment.
- * @sds: Statistics of the sched_domain which is to be packed
- */
-static int check_asym_packing(struct lb_env *env, struct sd_lb_stats *sds)
-{
- int busiest_cpu;
-
- if (!(env->sd->flags & SD_ASYM_PACKING))
- return 0;
-
- if (env->idle == CPU_NOT_IDLE)
- return 0;
-
- if (!sds->busiest)
- return 0;
-
- busiest_cpu = sds->busiest->asym_prefer_cpu;
- if (sched_asym_prefer(busiest_cpu, env->dst_cpu))
- return 0;
-
- env->imbalance = sds->busiest_stat.group_load;
-
- return 1;
-}
-
-/**
* fix_small_imbalance - Calculate the minor imbalance that exists
* amongst the groups of a sched_domain, during
* load balancing.
@@ -8650,6 +8614,11 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
local = &sds->local_stat;
busiest = &sds->busiest_stat;
+ if (busiest->group_asym_capacity) {
+ env->imbalance = busiest->group_load;
+ return;
+ }
+
if (busiest->group_type == group_imbalanced) {
/*
* In the group_imb case we cannot rely on group-wide averages
@@ -8754,8 +8723,8 @@ static struct sched_group *find_busiest_group(struct lb_env *env)
busiest = &sds.busiest_stat;
/* ASYM feature bypasses nice load balance check */
- if (check_asym_packing(env, &sds))
- return sds.busiest;
+ if (busiest->group_asym_capacity)
+ goto force_balance;
/* There is no busy sibling group to pull tasks from */
if (!sds.busiest || busiest->sum_nr_running == 0)
--
2.7.4
next reply other threads:[~2019-06-03 14:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 14:11 Vincent Guittot [this message]
2019-06-03 14:17 ` Vincent Guittot
2019-06-03 18:15 ` Valentin Schneider
2019-06-03 18:32 ` Vincent Guittot
2019-06-04 17:24 ` Valentin Schneider
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559571064-28087-1-git-send-email-vincent.guitto@linaro.org \
--to=vincent.guittot@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=vincent.guitto@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®